GEM

Procurement Opportunity: Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin,Steel Por in CENTRAL DELHI, DELHI

Bid Publish Date

08-Jun-2026, 6:25 pm

Bid End Date

19-Jun-2026, 4:00 pm

Location

CENTRAL DELHI , DELHI

WhatsApp Generate Docs

Progress

Issue08-Jun-2026, 6:25 pm

AwardPending

Explore all 4 tabs to view complete tender details

Quantity

Categories 2

CABIN PORTA CABIN

National Industrial Corridor Development Corporation Limited invites bids for Steel Porta Cabin (Q3) in CENTRAL DELHI, DELHI. Quantity: 9. Submission Deadline: 19-06-2026 16: 00: 00. Submit your proposal before the deadline.

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

Bid To RA Enabled

Item Category

Steel Porta Cabin (Q3)

Authority Records

MINISTRY OF COMMERCE AND INDUSTRYDEPARTMENT FOR PROMOTION OF INDUSTRY & INTERNAL TRADE

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 9

GeM-Bidding-9438886.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin

Cpwd

CENTRAL DELHI, DELHI

Posted: 29 August 2025

Closed: 1 September 2025

GEM

Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin

N/a

KOLHAPUR, MAHARASHTRA

Posted: 28 March 2025

Closed: 21 April 2025

GEM

Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin

Forest Department

AMRAVATI, MAHARASHTRA

Posted: 1 February 2025

Closed: 11 February 2025

GEM

Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin

Indian Air Force

Posted: 28 August 2025

Closed: 10 September 2025

GEM

Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin

Gujarat Gas Limited

GANDHI NAGAR, GUJARAT

Posted: 4 November 2025

Closed: 25 November 2025

GEM

Technical Specifications 6 Items

Item #1 Details

View Catalog

Category	Specification	Requirement
PANEL MATERIAL	Side wall panel material	1.25 mm thick corrugated HR sheet
PANEL MATERIAL	Door panel material	Flush door 32 mm thick water proof.
PANEL MATERIAL	Window panel material	Powder coated aluminium sliding windows with 4 mm tinted Glass
PANEL MATERIAL	Door and Window canopy material	1.25 mm thick corrugated HR sheet
PANEL MATERIAL	Floor panels material	15 mm heavy duty cement fiber board inside and outside texture paint.
PANEL MATERIAL	Roof panel material	1.25 m thick corrugated HR sheet
PANEL MATERIAL	Insulation material for sides and End walls	30 mm high density thermocol.
PANEL MATERIAL	Insulation material for Roof	30 mm high density thermocol.
PANEL MATERIAL	Inside panel material for sides, end walls & roof	Consists of 8 mm thick pre-laminated board.
GENERIC	Configuration of Cabin	With one room - one toilet and one pantry
GENERIC	Approval of Advance sample	After award of contract - Seller shall have to get proto type Advance sample approved from Buyer before manufacturing / starting Bulk supplies - Buyer shall approve / provide list of modifications required within 10 days of offer of advance sample - If there is delay in approval of advance sample from Buyer side - the delivery period shall be regularized for the period of delay in sample approval.
GENERIC	Time period for completion of Erection work at site by seller	Within 30 days of the date of receipt of consignee's confirmation regarding completion of ground and foundation work
GENERIC	Suitability / structural stability / completness of structures, the structure is intended for use in	In wind condition of 55m/s - in Seismic zone V and ambient temperature range (-) 40 degree C to (+) 50 degree C - 1 M snow load standing on the roof - Roof slope 1 : 2 Cabin should be structurally stable and suitable to meet severity of these climatic condition.
GENERIC	Type of slope(roof)	Two way slope.
GENERIC	Storage provision	N.A
GENERIC	Provision for Power Connection	The seller to be liable to get the Electric connection through 3 core insulated underground cable covered with MS pipe from the power supply point provided by the Buyer., The seller to be liable to get the Electric connection through 3 core insulated underground cable covered with PVC pipe from the power supply point provided by the Buyer., Provision for Power Connection not required., The seller to be liable for Electric Supply to Porta Cabin at one point only (suitable for 415 V 50 HZ for distribution of supply for various appliances)
GENERIC	Wiring	Concealed wiring
GENERIC	Provision for Cable , Switches and Junction box connection	Seller to make appropriate provisions for cable laying - installing meter / junction box with switches - other related electrical accessories as may be require for the power supply to the Cabin.
GENERIC	Other requirements	Not required.
FRAME MATERIAL	Roof frame	Made of MS having stiffner Top 40 mm x 20 mm x 3.2 mm thick
FRAME MATERIAL	Side Panel frame	Made of MS having stiffner Top 40 mm x 20 mm x 3.2 mm thick
FRAME MATERIAL	Floor panel frame	MS having 50 mm x 50 mm x 1.2 mm
Dimensions and Thickness	Inside Length ± 15 mm	3050 mm
Dimensions and Thickness	Inside Width ± 15 mm	3050 mm
Dimensions and Thickness	Total Height (mm) ± 15mm	2590 mm
Dimensions and Thickness	Roof projection (if any) ± 10 mm	N.A
Dimensions and Thickness	Total thickness of Wall panel ± 2 mm	40 mm
Dimensions and Thickness	Total thickness of Door panel ± 2 mm	35 mm
Dimensions and Thickness	Roof ridge height ± 10 mm	N.A
Dimensions and Thickness	Almirah / Cabinet size ± 5 mm	N.A
MISCELENIOUS	Electric fittings	Only electric points to be provided for one fan - One light - One bulkhead fitting point - one 5 amp. power point with Switch board including Double pole MCB 20A with metal enclosure - continuous earth wires to be provided and also external earth terminal to be provided.
MISCELENIOUS	Number of Windows	2 nos. windows
MISCELENIOUS	Roof ridge	N.A
MISCELENIOUS	Flashing item (U track, L corner etc)	N.A
MISCELENIOUS	Locking / Security	Cabin have to be provision of locking Door and Windows to prevent unwanted intrusion and theft.
COLOUR AND FINISH	Colour	White
COLOUR AND FINISH	Top coat	Chlorinated rubber paint 50 microns.
COLOUR AND FINISH	Paint outside	Two coats of synthetic enamel paint to be applied on expose structure and all MS items after installation.
COLOUR AND FINISH	Inside finish	Wall internal cladding by 50 mm thick glasswood with 6 mm prelaminated plywood with white colour sunmica fixed with aluminium stiffener and rivets
COLOUR AND FINISH	Logo (if any)	No logo
CERTIFICATION	Test reports to be furnished to buyer's on demand	Yes
CERTIFICATION	OEM of offered product is ISO 9001:2015 certified	Yes
CERTIFICATION	OEM of offered product is ISO 14001:2015 certified	Yes
CERTIFICATION	OEM of offered product is ISO 18001:2007 certified	Yes

Item #2 Details

View Catalog

Category	Specification	Requirement
PANEL MATERIAL	Side wall panel material	1.25 mm thick corrugated HR sheet
PANEL MATERIAL	Door panel material	Flush door 32 mm thick water proof.
PANEL MATERIAL	Window panel material	Powder coated aluminium sliding windows with 4 mm tinted Glass
PANEL MATERIAL	Door and Window canopy material	18 gauge MS corrugated sheet.
PANEL MATERIAL	Floor panels material	19 mm thick marine grade plywood confmg. to IS 710 / latest to be laid on top and secured by self - tapping screws to the base members - Covered with 2 mm thick PVC sheets.
PANEL MATERIAL	Roof panel material	18 gauge MS corrugated sheet
PANEL MATERIAL	Insulation material for sides and End walls	With 50 mm thick glass wool
PANEL MATERIAL	Insulation material for Roof	With 75 mm thick glass wool
PANEL MATERIAL	Inside panel material for sides, end walls & roof	Consists of 8 mm thick pre-laminated board.
GENERIC	Configuration of Cabin	With one Room and Verandah.
GENERIC	Approval of Advance sample	After award of contract - Seller shall have to get proto type Advance sample approved from Buyer before manufacturing / starting Bulk supplies - Buyer shall approve / provide list of modifications required within 10 days of offer of advance sample - If there is delay in approval of advance sample from Buyer side - the delivery period shall be regularized for the period of delay in sample approval.
GENERIC	Time period for completion of Erection work at site by seller	Within 20 days of the date of receipt of consignee's confirmation regarding completion of ground and foundation work
GENERIC	Suitability / structural stability / completness of structures, the structure is intended for use in	In wind condition of 55m/s - in Seismic zone V and ambient temperature range (-) 40 degree C to (+) 50 degree C - 1 M snow load standing on the roof - Roof slope 1 : 2 Cabin should be structurally stable and suitable to meet severity of these climatic condition.
GENERIC	Type of slope(roof)	One way slope.
GENERIC	Storage provision	1 no. Wooden Cabinet
GENERIC	Provision for Power Connection	The seller to be liable to get the Electric connection through 3 core insulated underground cable covered with MS pipe from the power supply point provided by the Buyer., The seller to be liable to get the Electric connection through 3 core insulated underground cable covered with PVC pipe from the power supply point provided by the Buyer., Provision for Power Connection not required., The seller to be liable for Electric Supply to Porta Cabin at one point only (suitable for 415 V 50 HZ for distribution of supply for various appliances)
GENERIC	Wiring	Concealed wiring
GENERIC	Provision for Cable , Switches and Junction box connection	Seller to make appropriate provisions for cable laying - installing meter / junction box with switches - other related electrical accessories as may be require for the power supply to the Cabin.
GENERIC	Other requirements	All necessary required permissions from civic agencies for installation and commissioning to be arranged by seller - necessary assistance / documents required to be provided by Buyer.
FRAME MATERIAL	Roof frame	Made of MS having stiffner Top 40 mm x 20 mm x 3.2 mm thick
FRAME MATERIAL	Side Panel frame	Made of MS having stiffner Top 40 mm x 20 mm x 3.2 mm thick
FRAME MATERIAL	Floor panel frame	MS having 50 mm x 50 mm x 1.2 mm
Dimensions and Thickness	Inside Length ± 15 mm	3050 mm
Dimensions and Thickness	Inside Width ± 15 mm	3050 mm
Dimensions and Thickness	Total Height (mm) ± 15mm	2590 mm
Dimensions and Thickness	Roof projection (if any) ± 10 mm	305 mm to be given on all sides at full height of cabins.
Dimensions and Thickness	Total thickness of Wall panel ± 2 mm	75 mm
Dimensions and Thickness	Total thickness of Door panel ± 2 mm	40 mm
Dimensions and Thickness	Roof ridge height ± 10 mm	Total height (i.e. height of side panels) + 610 mm
Dimensions and Thickness	Almirah / Cabinet size ± 5 mm	760 mm x 405 mm x 750 mm
MISCELENIOUS	Electric fittings	Only electric points to be provided for one fan - One light - One bulkhead fitting point - one 5 amp. power point with Switch board including Double pole MCB 20A with metal enclosure - continuous earth wires to be provided and also external earth terminal to be provided.
MISCELENIOUS	Number of Windows	2 nos. windows
MISCELENIOUS	Roof ridge	To be made out from 0.45 mm thick PPGI sheet.
MISCELENIOUS	Flashing item (U track, L corner etc)	To be made out with 0.45 mm thick PPGI sheet in require size and shape.
MISCELENIOUS	Locking / Security	Cabin have to be provision of locking Door and Windows to prevent unwanted intrusion and theft.
COLOUR AND FINISH	Colour	As per Buyer's choice
COLOUR AND FINISH	Top coat	Chlorinated rubber paint 50 microns.
COLOUR AND FINISH	Paint outside	Two coats of synthetic enamel paint to be applied on expose structure and all MS items after installation.
COLOUR AND FINISH	Inside finish	Internal panels - doors - ceiling - shutter to be white finish (excluding polycarbonate / acrylic glass sheet and aluminium frames on windows)
COLOUR AND FINISH	Logo (if any)	No logo
CERTIFICATION	Test reports to be furnished to buyer's on demand	Yes
CERTIFICATION	OEM of offered product is ISO 9001:2015 certified	Yes
CERTIFICATION	OEM of offered product is ISO 14001:2015 certified	Yes
CERTIFICATION	OEM of offered product is ISO 18001:2007 certified	Yes

Item #3 Details

View Catalog

Category	Specification	Requirement
PANEL MATERIAL	Side wall panel material	1.25 mm thick corrugated HR sheet
PANEL MATERIAL	Door panel material	Flush door 32 mm thick water proof.
PANEL MATERIAL	Window panel material	Powder coated aluminium sliding windows with 4 mm tinted Glass
PANEL MATERIAL	Door and Window canopy material	1.25 mm thick corrugated HR sheet
PANEL MATERIAL	Floor panels material	15 mm heavy duty cement fiber board inside and outside texture paint.
PANEL MATERIAL	Roof panel material	1.25 m thick corrugated HR sheet
PANEL MATERIAL	Insulation material for sides and End walls	30 mm high density thermocol.
PANEL MATERIAL	Insulation material for Roof	30 mm high density thermocol.
PANEL MATERIAL	Inside panel material for sides, end walls & roof	Consists of 8 mm thick pre-laminated board.
GENERIC	Configuration of Cabin	With one room - one toilet and one pantry
GENERIC	Approval of Advance sample	After award of contract - Seller shall have to get proto type Advance sample approved from Buyer before manufacturing / starting Bulk supplies - Buyer shall approve / provide list of modifications required within 10 days of offer of advance sample - If there is delay in approval of advance sample from Buyer side - the delivery period shall be regularized for the period of delay in sample approval.
GENERIC	Time period for completion of Erection work at site by seller	Within 30 days of the date of receipt of consignee's confirmation regarding completion of ground and foundation work
GENERIC	Suitability / structural stability / completness of structures, the structure is intended for use in	In wind condition of 55m/s - in Seismic zone V and ambient temperature range (-) 40 degree C to (+) 50 degree C - 1 M snow load standing on the roof - Roof slope 1 : 2 Cabin should be structurally stable and suitable to meet severity of these climatic condition.
GENERIC	Type of slope(roof)	Two way slope.
GENERIC	Storage provision	N.A
GENERIC	Provision for Power Connection	The seller to be liable to get the Electric connection through 3 core insulated underground cable covered with MS pipe from the power supply point provided by the Buyer., The seller to be liable to get the Electric connection through 3 core insulated underground cable covered with PVC pipe from the power supply point provided by the Buyer., Provision for Power Connection not required., The seller to be liable for Electric Supply to Porta Cabin at one point only (suitable for 415 V 50 HZ for distribution of supply for various appliances)
GENERIC	Wiring	Concealed wiring
GENERIC	Provision for Cable , Switches and Junction box connection	Seller to make appropriate provisions for cable laying - installing meter / junction box with switches - other related electrical accessories as may be require for the power supply to the Cabin.
GENERIC	Other requirements	Not required.
FRAME MATERIAL	Roof frame	Made of MS having stiffner Top 40 mm x 20 mm x 3.2 mm thick
FRAME MATERIAL	Side Panel frame	Made of MS having stiffner Top 40 mm x 20 mm x 3.2 mm thick
FRAME MATERIAL	Floor panel frame	MS having 50 mm x 50 mm x 1.2 mm
Dimensions and Thickness	Inside Length ± 15 mm	3050 mm
Dimensions and Thickness	Inside Width ± 15 mm	3050 mm
Dimensions and Thickness	Total Height (mm) ± 15mm	2590 mm
Dimensions and Thickness	Roof projection (if any) ± 10 mm	N.A
Dimensions and Thickness	Total thickness of Wall panel ± 2 mm	40 mm
Dimensions and Thickness	Total thickness of Door panel ± 2 mm	35 mm
Dimensions and Thickness	Roof ridge height ± 10 mm	N.A
Dimensions and Thickness	Almirah / Cabinet size ± 5 mm	N.A
MISCELENIOUS	Electric fittings	Only electric points to be provided for one fan - One light - One bulkhead fitting point - one 5 amp. power point with Switch board including Double pole MCB 20A with metal enclosure - continuous earth wires to be provided and also external earth terminal to be provided.
MISCELENIOUS	Number of Windows	2 nos. windows
MISCELENIOUS	Roof ridge	N.A
MISCELENIOUS	Flashing item (U track, L corner etc)	N.A
MISCELENIOUS	Locking / Security	Cabin have to be provision of locking Door and Windows to prevent unwanted intrusion and theft.
COLOUR AND FINISH	Colour	White
COLOUR AND FINISH	Top coat	Chlorinated rubber paint 50 microns.
COLOUR AND FINISH	Paint outside	Two coats of synthetic enamel paint to be applied on expose structure and all MS items after installation.
COLOUR AND FINISH	Inside finish	Wall internal cladding by 50 mm thick glasswood with 6 mm prelaminated plywood with white colour sunmica fixed with aluminium stiffener and rivets
COLOUR AND FINISH	Logo (if any)	No logo
CERTIFICATION	Test reports to be furnished to buyer's on demand	Yes
CERTIFICATION	OEM of offered product is ISO 9001:2015 certified	Yes
CERTIFICATION	OEM of offered product is ISO 14001:2015 certified	Yes
CERTIFICATION	OEM of offered product is ISO 18001:2007 certified	Yes

Item #4 Details

View Catalog

Category	Specification	Requirement
PANEL MATERIAL	Side wall panel material	1.25 mm thick corrugated HR sheet
PANEL MATERIAL	Door panel material	Flush door 32 mm thick water proof.
PANEL MATERIAL	Window panel material	Powder coated aluminium sliding windows with 4 mm tinted Glass
PANEL MATERIAL	Door and Window canopy material	18 gauge MS corrugated sheet.
PANEL MATERIAL	Floor panels material	16 mm thick marine grade plywood with Vinyl carpet.
PANEL MATERIAL	Roof panel material	18 gauge MS corrugated sheet
PANEL MATERIAL	Insulation material for sides and End walls	With 50 mm thick glass wool
PANEL MATERIAL	Insulation material for Roof	With 75 mm thick glass wool
PANEL MATERIAL	Inside panel material for sides, end walls & roof	Consists of 8 mm thick pre-laminated board.
GENERIC	Configuration of Cabin	With one Room only.
GENERIC	Approval of Advance sample	After award of contract - Seller shall have to get proto type Advance sample approved from Buyer before manufacturing / starting Bulk supplies - Buyer shall approve / provide list of modifications required within 10 days of offer of advance sample - If there is delay in approval of advance sample from Buyer side - the delivery period shall be regularized for the period of delay in sample approval.
GENERIC	Time period for completion of Erection work at site by seller	Within 20 days of the date of receipt of consignee's confirmation regarding completion of ground and foundation work
GENERIC	Suitability / structural stability / completness of structures, the structure is intended for use in	In wind condition of 55m/s - in Seismic zone V and ambient temperature range (-) 40 degree C to (+) 50 degree C - 1 M snow load standing on the roof - Roof slope 1 : 2 Cabin should be structurally stable and suitable to meet severity of these climatic condition.
GENERIC	Type of slope(roof)	One way slope.
GENERIC	Storage provision	N.A
GENERIC	Provision for Power Connection	The seller to be liable to get the Electric connection through 3 core insulated underground cable covered with MS pipe from the power supply point provided by the Buyer.
GENERIC	Wiring	Surface wiring
GENERIC	Provision for Cable , Switches and Junction box connection	Seller to make appropriate provisions for cable laying - installing meter / junction box with switches - other related electrical accessories as may be require for the power supply to the Cabin.
GENERIC	Other requirements	Not required.
FRAME MATERIAL	Roof frame	Made of MS having stiffner Top 40 mm x 20 mm x 3.2 mm thick
FRAME MATERIAL	Side Panel frame	Made of MS having stiffner Top 40 mm x 20 mm x 3.2 mm thick
FRAME MATERIAL	Floor panel frame	MS having 50 mm x 50 mm x 1.2 mm
Dimensions and Thickness	Inside Length ± 15 mm	3050 mm
Dimensions and Thickness	Inside Width ± 15 mm	3050 mm
Dimensions and Thickness	Total Height (mm) ± 15mm	2590 mm
Dimensions and Thickness	Roof projection (if any) ± 10 mm	N.A
Dimensions and Thickness	Total thickness of Wall panel ± 2 mm	75 mm
Dimensions and Thickness	Total thickness of Door panel ± 2 mm	40 mm
Dimensions and Thickness	Roof ridge height ± 10 mm	N.A
Dimensions and Thickness	Almirah / Cabinet size ± 5 mm	N.A
MISCELENIOUS	Electric fittings	Only electric points to be provided for one fan - One light - One bulkhead fitting point - one 5 amp. power point with Switch board including Double pole MCB 20A with metal enclosure - continuous earth wires to be provided and also external earth terminal to be provided.
MISCELENIOUS	Number of Windows	1 no. window
MISCELENIOUS	Roof ridge	N.A
MISCELENIOUS	Flashing item (U track, L corner etc)	As per Buyer’s choice
MISCELENIOUS	Locking / Security	Cabin have to be provision of locking Door and Windows to prevent unwanted intrusion and theft.
COLOUR AND FINISH	Colour	As per Buyer's choice
COLOUR AND FINISH	Top coat	Chlorinated rubber paint 50 microns.
COLOUR AND FINISH	Paint outside	Two coats of synthetic enamel paint to be applied on expose structure and all MS items after installation.
COLOUR AND FINISH	Inside finish	Internal panels - doors - ceiling - shutter to be white finish (excluding polycarbonate / acrylic glass sheet and aluminium frames on windows)
COLOUR AND FINISH	Logo (if any)	No logo
CERTIFICATION	Test reports to be furnished to buyer's on demand	No
CERTIFICATION	OEM of offered product is ISO 9001:2015 certified	No
CERTIFICATION	OEM of offered product is ISO 14001:2015 certified	No
CERTIFICATION	OEM of offered product is ISO 18001:2007 certified	No

Item #5 Details

View Catalog

Category	Specification	Requirement
PANEL MATERIAL	Side wall panel material	1.25 mm thick corrugated HR sheet
PANEL MATERIAL	Door panel material	Flush door 32 mm thick water proof.
PANEL MATERIAL	Window panel material	Powder coated aluminium sliding windows with 4 mm tinted Glass
PANEL MATERIAL	Door and Window canopy material	18 gauge MS corrugated sheet.
PANEL MATERIAL	Floor panels material	18mm thick cement board with PVC Vinyl carpet top of at least 1.5mm thickness with suitable support on bottom
PANEL MATERIAL	Roof panel material	18 gauge MS corrugated sheet
PANEL MATERIAL	Insulation material for sides and End walls	With 50 mm thick glass wool
PANEL MATERIAL	Insulation material for Roof	With 75 mm thick glass wool
PANEL MATERIAL	Inside panel material for sides, end walls & roof	Consists of 8 mm thick pre-laminated board.
GENERIC	Configuration of Cabin	One no. Toilet (comprising of 2 Urine pot, 1 Toilet Room with Sheet and 1 no. Wash basin)
GENERIC	Approval of Advance sample	After award of contract - Seller shall have to get proto type Advance sample approved from Buyer before manufacturing / starting Bulk supplies - Buyer shall approve / provide list of modifications required within 10 days of offer of advance sample - If there is delay in approval of advance sample from Buyer side - the delivery period shall be regularized for the period of delay in sample approval.
GENERIC	Time period for completion of Erection work at site by seller	Within 30 days of the date of receipt of consignee's confirmation regarding completion of ground and foundation work
GENERIC	Suitability / structural stability / completness of structures, the structure is intended for use in	In wind condition of 55m/s - in Seismic zone V and ambient temperature range (-) 40 degree C to (+) 50 degree C - 1 M snow load standing on the roof - Roof slope 1 : 2 Cabin should be structurally stable and suitable to meet severity of these climatic condition.
GENERIC	Type of slope(roof)	Two way slope.
GENERIC	Storage provision	1 no. Wooden Cabinet
GENERIC	Provision for Power Connection	The seller to be liable to get the Electric connection through 3 core insulated underground cable covered with MS pipe from the power supply point provided by the Buyer.
GENERIC	Wiring	Concealed wiring
GENERIC	Provision for Cable , Switches and Junction box connection	As per Buyer’s choice
GENERIC	Other requirements	All necessary required permissions from civic agencies for installation and commissioning to be arranged by seller - necessary assistance / documents required to be provided by Buyer.
FRAME MATERIAL	Roof frame	Made of MS having stiffner Top 40 mm x 20 mm x 3.2 mm thick
FRAME MATERIAL	Side Panel frame	Made of MS having stiffner Top 40 mm x 20 mm x 3.2 mm thick
FRAME MATERIAL	Floor panel frame	MS having 50 mm x 50 mm x 1.2 mm
Dimensions and Thickness	Inside Length ± 15 mm	3050 mm
Dimensions and Thickness	Inside Width ± 15 mm	3050 mm
Dimensions and Thickness	Total Height (mm) ± 15mm	2440 mm
Dimensions and Thickness	Roof projection (if any) ± 10 mm	305 mm to be given on all sides at full height of cabins.
Dimensions and Thickness	Total thickness of Wall panel ± 2 mm	75 mm
Dimensions and Thickness	Total thickness of Door panel ± 2 mm	40 mm
Dimensions and Thickness	Roof ridge height ± 10 mm	Total height (i.e. height of side panels) + 610 mm
Dimensions and Thickness	Almirah / Cabinet size ± 5 mm	760 mm x 405 mm x 750 mm
MISCELENIOUS	Electric fittings	Only electric points to be provided for one fan - One light - One bulkhead fitting point - one 5 amp. power point with Switch board including Double pole MCB 20A with metal enclosure - continuous earth wires to be provided and also external earth terminal to be provided.
MISCELENIOUS	Number of Windows	2 nos. windows
MISCELENIOUS	Roof ridge	To be made out from 0.45 mm thick PPGI sheet.
MISCELENIOUS	Flashing item (U track, L corner etc)	N.A
MISCELENIOUS	Locking / Security	Cabin have to be provision of locking Door and Windows to prevent unwanted intrusion and theft.
COLOUR AND FINISH	Colour	As per Buyer's choice
COLOUR AND FINISH	Top coat	Chlorinated rubber paint 50 microns.
COLOUR AND FINISH	Paint outside	Two coats of synthetic enamel paint to be applied on expose structure and all MS items after installation.
COLOUR AND FINISH	Inside finish	Inner panelling in all walls and roof provided with Decorative laminated sheet fixed on moisture resistant plywood
COLOUR AND FINISH	Logo (if any)	Approved logo of desired size to be painted as per Buyer's requirement.
CERTIFICATION	Test reports to be furnished to buyer's on demand	Yes
CERTIFICATION	OEM of offered product is ISO 9001:2015 certified	Yes
CERTIFICATION	OEM of offered product is ISO 14001:2015 certified	Yes
CERTIFICATION	OEM of offered product is ISO 18001:2007 certified	Yes

Item #6 Details

View Catalog

Category	Specification	Requirement
PANEL MATERIAL	Side wall panel material	1.25 mm thick corrugated HR sheet
PANEL MATERIAL	Door panel material	Flush door 32 mm thick water proof.
PANEL MATERIAL	Window panel material	Powder coated aluminium sliding windows with 4 mm tinted Glass
PANEL MATERIAL	Door and Window canopy material	Fibreglass Reinforced plastics (F.R.P).
PANEL MATERIAL	Floor panels material	24 mm Block board thickness with FRP coating checkers style.
PANEL MATERIAL	Roof panel material	Fibreglass Reinforced plastics (F.R.P)
PANEL MATERIAL	Insulation material for sides and End walls	With 50 mm thick glass wool
PANEL MATERIAL	Insulation material for Roof	With 75 mm thick glass wool
PANEL MATERIAL	Inside panel material for sides, end walls & roof	Consists of 8 mm thick pre-laminated board.
GENERIC	Configuration of Cabin	With one Room and Verandah.
GENERIC	Approval of Advance sample	After award of contract - Seller shall have to get proto type Advance sample approved from Buyer before manufacturing / starting Bulk supplies - Buyer shall approve / provide list of modifications required within 10 days of offer of advance sample - If there is delay in approval of advance sample from Buyer side - the delivery period shall be regularized for the period of delay in sample approval.
GENERIC	Time period for completion of Erection work at site by seller	Within 20 days of the date of receipt of consignee's confirmation regarding completion of ground and foundation work
GENERIC	Suitability / structural stability / completness of structures, the structure is intended for use in	In wind condition of 55m/s - in Seismic zone V and ambient temperature range (-) 40 degree C to (+) 50 degree C - 1 M snow load standing on the roof - Roof slope 1 : 2 Cabin should be structurally stable and suitable to meet severity of these climatic condition.
GENERIC	Type of slope(roof)	One way slope.
GENERIC	Storage provision	1 no. Wooden Cabinet
GENERIC	Provision for Power Connection	The seller to be liable to get the Electric connection through 3 core insulated underground cable covered with MS pipe from the power supply point provided by the Buyer., The seller to be liable to get the Electric connection through 3 core insulated underground cable covered with PVC pipe from the power supply point provided by the Buyer., Provision for Power Connection not required., The seller to be liable for Electric Supply to Porta Cabin at one point only (suitable for 415 V 50 HZ for distribution of supply for various appliances)
GENERIC	Wiring	Concealed wiring
GENERIC	Provision for Cable , Switches and Junction box connection	Seller to make appropriate provisions for cable laying - installing meter / junction box with switches - other related electrical accessories as may be require for the power supply to the Cabin.
GENERIC	Other requirements	All necessary required permissions from civic agencies for installation and commissioning to be arranged by seller - necessary assistance / documents required to be provided by Buyer.
FRAME MATERIAL	Roof frame	Made of MS having stiffner Top 40 mm x 20 mm x 3.2 mm thick
FRAME MATERIAL	Side Panel frame	Made of MS having stiffner Top 40 mm x 20 mm x 3.2 mm thick
FRAME MATERIAL	Floor panel frame	MS having 50 mm x 50 mm x 1.2 mm
Dimensions and Thickness	Inside Length ± 15 mm	3050 mm
Dimensions and Thickness	Inside Width ± 15 mm	3050 mm
Dimensions and Thickness	Total Height (mm) ± 15mm	2590 mm
Dimensions and Thickness	Roof projection (if any) ± 10 mm	305 mm to be given on all sides at full height of cabins.
Dimensions and Thickness	Total thickness of Wall panel ± 2 mm	75 mm
Dimensions and Thickness	Total thickness of Door panel ± 2 mm	40 mm
Dimensions and Thickness	Roof ridge height ± 10 mm	Total height (i.e. height of side panels) + 610 mm
Dimensions and Thickness	Almirah / Cabinet size ± 5 mm	760 mm x 405 mm x 750 mm
MISCELENIOUS	Electric fittings	Only electric points to be provided for one fan - One light - One bulkhead fitting point - one 5 amp. power point with Switch board including Double pole MCB 20A with metal enclosure - continuous earth wires to be provided and also external earth terminal to be provided.
MISCELENIOUS	Number of Windows	1 no. window
MISCELENIOUS	Roof ridge	To be made out from 0.45 mm thick PPGI sheet.
MISCELENIOUS	Flashing item (U track, L corner etc)	To be made out with 0.45 mm thick PPGI sheet in require size and shape.
MISCELENIOUS	Locking / Security	Cabin have to be provision of locking Door and Windows to prevent unwanted intrusion and theft.
COLOUR AND FINISH	Colour	White
COLOUR AND FINISH	Top coat	Chlorinated rubber paint 50 microns.
COLOUR AND FINISH	Paint outside	Two coats of synthetic enamel paint to be applied on expose structure and all MS items after installation.
COLOUR AND FINISH	Inside finish	Internal panels - doors - ceiling - shutter to be white finish (excluding polycarbonate / acrylic glass sheet and aluminium frames on windows)
COLOUR AND FINISH	Logo (if any)	Approved logo of desired size to be painted as per Buyer's requirement.
CERTIFICATION	Test reports to be furnished to buyer's on demand	Yes
CERTIFICATION	OEM of offered product is ISO 9001:2015 certified	Yes
CERTIFICATION	OEM of offered product is ISO 14001:2015 certified	Yes
CERTIFICATION	OEM of offered product is ISO 18001:2007 certified	Yes

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI

Historical Data

Required Documents

Experience Criteria

Bidder Turnover

Certificate (Requested in ATC)

OEM Authorization Certificate

Additional Doc 1 (Requested in ATC)

Additional Doc 2 (Requested in ATC)

Additional Doc 3 (Requested in ATC)

Additional Doc 4 (Requested in ATC)

Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Similar Tenders

5 found

Urgent

Steel Porta Cabin

N/a

EMD: ₹35,000

⏰ Deadline: 6 days left

🛒 Type: Goods

View GEM

Urgent

Steel Porta Cabin

Uttar Pradesh Forest Corporation

EMD: ₹25,000

Est: ₹25.0 L

⏰ Deadline: 4 days left

🛒 Type: Goods

View GEM

Urgent

Indian Army Porta Cabin Tender Tawang Arunachal Pradesh 790104 - Porta Cabin Procurement 2026

Indian Army

📍 TAWANG, ARUNACHAL PRADESH

EMD: ₹19,600

⏰ Deadline: 3 days left

🛒 Type: Goods

View GEM

Urgent

Porta Cabin

Western Railway

📍 VADODARA, GUJARAT

⏰ Deadline: 7 days left

🛒 Type: Goods

View GEM

Steel Almirah / Cabinets (V4),Heavy Duty Storage Racks

Airports Authority Of India

📍 GULBARGA, KARNATAKA

Est: ₹3.0 L

⏰ Deadline: 2 weeks left

🛒 Type: Goods

View GEM

Explore More Opportunities

Quick Access

All Tenders Browse all opportunities

DELHI State tenders

CENTRAL DELHI , DELHI City tenders

Categories 2 available

CABIN

PORTA CABIN

TenderDekho

Offerings

Tender Alerts

5 types · 54 portals · AI-personalized

Competitor Intel

4 L+ companies · H2H analysis

GeM Services

Registration · Listing · Submission

View All

Unlock Tender Documents

Performance Analytics

7-metric analysis with year-wise breakdown

Competitor Intelligence

Multi-dimensional analysis across 6 parameters

Market Penetration

By department, ministry, geography & category

Historical Analysis

Complete tender history with results

Documents 9

GeM-Bidding-9438886.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Browse Tenders

Categories

States

Cities

Authorities

Procurement Opportunity: Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin,Steel Por in CENTRAL DELHI, DELHI

Categories 2

Additional Tender Data

Commercial Details

Authority Records

BID & GeM Expert Consultancy

Documents 9

GeM-Bidding-9438886.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

Buyer uploaded ATC document

GEM General Terms and Conditions Document

Past Similar Tenders (Historical Results)

Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin

Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin

Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin

Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin

Steel Porta Cabin,Steel Porta Cabin,Steel Porta Cabin

Technical Specifications 6 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Item #6 Details

🤖 AI-Powered Bidder Prediction

Required Documents

Similar Tenders

Steel Porta Cabin

Steel Porta Cabin

Indian Army Porta Cabin Tender Tawang Arunachal Pradesh 790104 - Porta Cabin Procurement 2026

Porta Cabin

Steel Almirah / Cabinets (V4),Heavy Duty Storage Racks

Explore More Opportunities

Unlock Tender Documents

Documents 9

GeM-Bidding-9438886.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

Buyer uploaded ATC document

GEM General Terms and Conditions Document

Documents

Unlock All Documents

GeM-Bidding-9438886.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

Buyer uploaded ATC document

GEM General Terms and Conditions Document