Bid Publish Date
20-Mar-2025, 3:50 pm
Bid End Date
01-Apr-2025, 9:30 am
EMD
₹18,54,000
Value
₹9,27,00,000
Location
Progress
Tender Type
Open
Tender Fee
₹10,000
Tender Fee Exemption
No
EMD Exemption
No
Category
GENERAL
The issuing authority announces a tender for Supplying & Installation of Furniture & Fixture Work of Residence & Hostel at Simultala Awasiya Vidyalay, Simultala, Jamui (Bihar) in BIHAR. Submission Deadline: 01-04-2025 09: 30: 00. Last date to apply is approaching fast!
Processing Fee
₹5,900
Tender Currency
INR
Bid Currency
INR
Ranking Sequence
L1 Ranking
Estimated Value Visibility
N
Bid To RA
No
Organization Hierarchy
Government of Bihar->Bihar State Educational Infrastructure Development Corporation Limited->Bihar State Educational Infrastructure Development Corporation Limited, HQ
Approving Authority
RAJDEO SINGH (CHIEF ENGINEER)
Tender Creator
Mr RAJDEO SINGH (CHIEF ENGINEER)
Pre-Bid Meeting Start
24-03-2025 09:00:00
Pre-Bid Meeting End
24-03-2025 09:30:00
Pre-Bid Discussion Type
OFFLINE
Pre-Bid Venue
CE Office, BSEIDC Patna
| Type | Amount | Currency | Mode | Exemption |
|---|---|---|---|---|
| EMD | ₹18,54,000 | INR | Internet Payment Gateway(IPG),Challan|Bank Guarantee | No |
| Tender Fee | ₹10,000 | INR | Internet Payment Gateway(IPG),Challan| | No |
| Tender Processing Fee | ₹5,900 | INR | Internet Payment Gateway(IPG),Challan| | No |
GST
PAN
Bids shall remain valid for a period not less than 120 days after the deadline date.
BID SECURITY-Online/ Bank Guarantee of Rs.18.54 Lac
Legal Status of Bidder.
Place of Registration.
Principal place of Business
Power of attorney of signatory Bid
Annual Financial Turn Over (Rs in Lakhs) in last five years. - 463.50 Lac
Work Exp - Satisfactory completed 1 Similar work not less than of Rs. 463.50 Lac in last 5 fin yr
Existing commitments and ongoing works
Work for which Bid already submitted
Bid Capacity of Rs.927.00 Lacs
Information regarding any litigation during the last five years, in which the Bidder is involved
Affidavit - As per SBD
Valid ISO: 9001 issued from NABCB Govt of India Accredited agencies only
Valid BIFMA Membership
Green guard certification
AIOTA Certificate
Laboratory Test Certificate of all Product to be supplied
Credit Facility ( Rs. In Lakh) 92.70 Lac
Undertaking (25%)
Valid Character certificate (TO BE ISSUED BY SUPRITENDENT OF POLICE OR HIGHER DESIGNATED OFFICER)
Any Other
Name of the Contractor
Postal Address of the Contractor
Contact No. of the Contractor
Email id of the Contractor
GST
PAN
Bids shall remain valid for a period not less than 120 days after the deadline date.
BID SECURITY-Online/ Bank Guarantee 18.54 Lac
Legal Status of Bidder.
Place of Registration.
Principal place of Business
Power of attorney of signatory Bid
Annual Financial Turn Over (Rs in Lakhs) in last five years. - 463.50 Lac
Work Exp - Satisfactory completed 1 Similar work not less than of Rs. 463.50 Lac in last 5 fin yr
Existing commitments and ongoing works
Work for which Bid already submitted
Bid Capacity of Rs.927.00 Lacs
Information regarding any litigation during the last five years, in which the Bidder is involved
Affidavit - As per attached format of SBD
The manufacturer/OEM must have Valid ISO: 9001-2015, ISO: 14001-2015, ISO: 45001-2018, ISO 5001: 2018 Certificates & ISO- 13485:2016 Issued by NABCB Govt of India Accredited agencies only
Valid BIFMA Membership
The manufacturer/OEM must have Indoor Advantage Gold Isuued by SCS Global Services USA & Green Co Certificate Issued by CII.
Undertaking (25%)
IGBC/IGBC Platinum membership Certificate by CII, SEFA, BIFMA Level 1/Level 2 Certificate.
Laboratory Test Certificate of all Product to be supplied
Credit Facility ( Rs. In Lakh) 92.70 Lac
Valid Character certificate (TO BE ISSUED BY SUPRITENDENT OF POLICE OR HIGHER DESIGNATED OFFICER)
Accept All Terms And Conditions As Per NIT And SBD
Accept All Terms And Conditions As Per NIT And SBD
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
NIT
NIT
BOQ
NIT
NIT
NIT
N/A
DIU, THE DADRA AND NAGAR HAVELI AND DAMAN AND DIU
Bhabha Atomic Research Centre
Anakapalli, ANDHRA PRADESH
N/A
PITHORAGARH, UTTARAKHAND
N/A
KHORDHA, ODISHA
N/A
RANCHI, JHARKHAND
Tender Results
Loading results...
Supplying & Installation of APO Single Bed with Mattress 4" Size : WIDTH (W) - 915 MM. LENGTH (L) - 1980 MM. HEAD HEIGHT (H) - 640 MM TAIL HEIGHT (H) - 475 MM. BED FRAME : - Bed Frame Assembly is Welding of side frame, Inner slat. The side frame are made of rect. Tube 75x 25.4x1.2 mm Thk (3 nos.) & TYPE -2 SQ 19 X 1.0 (2 nos.) MM THK MS ERW Tube IS: 7138. HEAD BOARD & TAIL BOARD : - Head Board & Tail Board is made up of �16 X 1.0 mm THK MS ERW Tube IS: 7138 and support Bracket 3.2 mm THK MS Sheet IS : 513 HEAD/TAIL Board Connected with Bed Frame with M8 Bolt & Nut. FINISH - Epoxy Polyester Powder Coated - DFT 40-60 MICRON. CLADDING :- 1.2 mm THK MS SHEET per direction of Engineer-in-charge.
Supplying & Installation of APO Single Bed with Mattress 4" Size : WIDTH (W) - 915 MM. LENGTH (L) - 1980 MM. HEAD HEIGHT (H) - 640 MM TAIL HEIGHT (H) - 475 MM. BED FRAME : - Bed Frame Assembly is Welding of side frame, Inner slat. The side frame are made of rect. Tube 75x 25.4x1.2 mm Thk (3 nos.) & TYPE -2 SQ 19 X 1.0 (2 nos.) MM THK MS ERW Tube IS: 7138. HEAD BOARD & TAIL BOARD : - Head Board & Tail Board is made up of �16 X 1.0 mm THK MS ERW Tube IS: 7138 and support Bracket 3.2 mm THK MS Sheet IS : 513 HEAD/TAIL Board Connected with Bed Frame with M8 Bolt & Nut. FINISH - Epoxy Polyester Powder Coated - DFT 40-60 MICRON. CLADDING :- 1.2 mm THK MS SHEET per direction of Engineer-in-charge.
Supplying & Installation of Seat- SHELL : The single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound (refer product catalogue for colour chart). * SHELL SIZE : 44.0 cm. (W) x 50.2 cm. (D) x 40.5 cm. (H). M.S. POWDER COATED UNDERSTRUCTURE OPTION (SM6): The powder coated (DFT 50�10 microns) welded tubular frame is made from ? 2.22 � 0.03 cm x 0.16 � 0.0128 cm M.S. E.R.W tube. The 0.16 � 0.008 cm thk CRCA sheet is welded to tubes for fixing shell to the frame. The shoe is made of high impact strength polypropylene polymer compound and are fitted at the end of the tubular frame per direction of Engineer-in-charge.
Supplying & Installation of Seat- SHELL : The single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound (refer product catalogue for colour chart). * SHELL SIZE : 44.0 cm. (W) x 50.2 cm. (D) x 40.5 cm. (H). M.S. POWDER COATED UNDERSTRUCTURE OPTION (SM6): The powder coated (DFT 50�10 microns) welded tubular frame is made from ? 2.22 � 0.03 cm x 0.16 � 0.0128 cm M.S. E.R.W tube. The 0.16 � 0.008 cm thk CRCA sheet is welded to tubes for fixing shell to the frame. The shoe is made of high impact strength polypropylene polymer compound and are fitted at the end of the tubular frame per direction of Engineer-in-charge.
Supplying & Installation of King Bed with Mattress - Dimension (LxWxH) ? mm King Bed ? 2084 x 1900 x 900, Bed base height (mm) ? 360, Storage/Finish ? Without Storage/Black, Material used, Headboard & Tailboard ? Rubberwood, Side panels ? Rubberwood, Bed-base Partition ? Pinewood, Top of bed base - MDF, Recommended Mattress Size King Bed ? 78? x 72? ; 4-6? thickness with Mattress of size 78"x72"x4" & Pillow per direction of Engineer-in-charge.
Supplying & Installation of King Bed with Mattress - Dimension (LxWxH) ? mm King Bed ? 2084 x 1900 x 900, Bed base height (mm) ? 360, Storage/Finish ? Without Storage/Black, Material used, Headboard & Tailboard ? Rubberwood, Side panels ? Rubberwood, Bed-base Partition ? Pinewood, Top of bed base - MDF, Recommended Mattress Size King Bed ? 78? x 72? ; 4-6? thickness with Mattress of size 78"x72"x4" & Pillow per direction of Engineer-in-charge.
Supplying & Installation of Bed side Table - Dimension ? mm Overall width - 415 Overall depth ? 355 Overall height - 435 One drawer and one open shelf, Material used - Rubberwood, Finish - Black as per direction of Engineer-in-charge.
Supplying & Installation of Bed side Table - Dimension ? mm Overall width - 415 Overall depth ? 355 Overall height - 435 One drawer and one open shelf, Material used - Rubberwood, Finish - Black as per direction of Engineer-in-charge.
Supplying & Installation of Bed with Mattress 4" of size - Length - 2056.0 mm, Width - 1876.0 mm, Height - 930.0 mm. Material- Bed Structure consist of metal frames made of M.S. 25 mm square Pipes in 1.2 mm Thickness & M.S. Channels in 1.0 mm thickness. Partition panels & Plinths are made of 25 mm Thick Prelaminated Particle Board. Head board is made of 25 mm thick P.V.C. membrane pressed MDF. Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it. Side board, mattress panels, bottom panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges edge banded with 0.8 mm thick PVC edge banding. Finish- PVC membrane pressed MDF of Head Board is in Lime Oak finish. 18 mm thick Prelaminated Particle Board is in Maple shade. Metal frames are powder coated in shade Metallic Silver Grey to thickness of 50 microns(+-10) as per direction of Engineer-in-charge.
Supplying & Installation of Bed with Mattress 4" of size - Length - 2056.0 mm, Width - 1876.0 mm, Height - 930.0 mm. Material- Bed Structure consist of metal frames made of M.S. 25 mm square Pipes in 1.2 mm Thickness & M.S. Channels in 1.0 mm thickness. Partition panels & Plinths are made of 25 mm Thick Prelaminated Particle Board. Head board is made of 25 mm thick P.V.C. membrane pressed MDF. Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it. Side board, mattress panels, bottom panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges edge banded with 0.8 mm thick PVC edge banding. Finish- PVC membrane pressed MDF of Head Board is in Lime Oak finish. 18 mm thick Prelaminated Particle Board is in Maple shade. Metal frames are powder coated in shade Metallic Silver Grey to thickness of 50 microns(+-10) as per direction of Engineer-in-charge.
Supplying & Installation of Three Seater Sofa size 1810mm W x 850mm D x 725mm H , Single Seater Sofa size 775mm W x 850mm D x 725mm H. Material -Fabric, ? Designed as an affordable solution that doesn?t compromise on function and comfort. ? Consists of three modules that can be combined to form living room layouts, or used individually to create cosy corners in a home. ? Frame crafted from Pinewood that?s obtained from New Zealand?s forests, treated to be knot-free and termite resistant to increase the durability of the sofa. ? Three-seater shape isdefined by clean and straight lines making it versatile and easy to style. ? Soft and padded edges make for a safe, childfriendly addition to spaces. with Coffee Table of size Dimensions W x H x D (cm) - 120 x 45 x 60, Finish Color - Remini Walnut, Primary Material - Prelaminated Particle Board, Style- Contemporary & Modern as per direction of Engineer-in-charge.
Supplying & Installation of Three Seater Sofa size 1810mm W x 850mm D x 725mm H , Single Seater Sofa size 775mm W x 850mm D x 725mm H. Material -Fabric, ? Designed as an affordable solution that doesn?t compromise on function and comfort. ? Consists of three modules that can be combined to form living room layouts, or used individually to create cosy corners in a home. ? Frame crafted from Pinewood that?s obtained from New Zealand?s forests, treated to be knot-free and termite resistant to increase the durability of the sofa. ? Three-seater shape isdefined by clean and straight lines making it versatile and easy to style. ? Soft and padded edges make for a safe, childfriendly addition to spaces. with Coffee Table of size Dimensions W x H x D (cm) - 120 x 45 x 60, Finish Color - Remini Walnut, Primary Material - Prelaminated Particle Board, Style- Contemporary & Modern as per direction of Engineer-in-charge.
Supplying & Installation of Canteen Table 4 Seater PU Coated size shall be 1135 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking as per direction of Engineer-in-charge.
Supplying & Installation of Canteen Table 4 Seater PU Coated size shall be 1135 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking as per direction of Engineer-in-charge.
Supplying & Installation of Seat- SHELL : The single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound (refer product catalogue for colour chart). * SHELL SIZE : 44.0 cm. (W) x 50.2 cm. (D) x 40.5 cm. (H). M.S. POWDER COATED UNDERSTRUCTURE OPTION (SM6): The powder coated (DFT 50�10 microns) welded tubular frame is made from ? 2.22 � 0.03 cm x 0.16 � 0.0128 cm M.S. E.R.W tube. The 0.16 � 0.008 cm thk CRCA sheet is welded to tubes for fixing shell to the frame. The shoe is made of high impact strength polypropylene polymer compound and are fitted at the end of the tubular frame as per direction of Engineer-in-charge.
Supplying & Installation of Seat- SHELL : The single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound (refer product catalogue for colour chart). * SHELL SIZE : 44.0 cm. (W) x 50.2 cm. (D) x 40.5 cm. (H). M.S. POWDER COATED UNDERSTRUCTURE OPTION (SM6): The powder coated (DFT 50�10 microns) welded tubular frame is made from ? 2.22 � 0.03 cm x 0.16 � 0.0128 cm M.S. E.R.W tube. The 0.16 � 0.008 cm thk CRCA sheet is welded to tubes for fixing shell to the frame. The shoe is made of high impact strength polypropylene polymer compound and are fitted at the end of the tubular frame as per direction of Engineer-in-charge.
Supplying & Installation of Box Bed for master bed room with Mattress - Dimension (LxWxH) ? mm King size Bed ? 2084 x 1900 x 900, Bed base height (mm) ? 360, Storage/Finish ? Without Storage/Black, Material used, Headboard & Tailboard ? Rubberwood, Side panels ? Rubberwood, Bed-base Partition ? Pinewood, Top of bed base - MDF, Recommended Mattress Size King Bed ? 78? x 72? ; 4-6? thickness with Bedside Table - Dimension ? mm Overall width - 415 Overall depth ? 355 Overall height - 435 One drawer and one open shelf, Material used - Rubberwood, Finish - Black with Mattress of size 78"x72"x4" & Pillow as per direction of Engineer-in-charge.
Supplying & Installation of Box Bed for master bed room with Mattress - Dimension (LxWxH) ? mm King size Bed ? 2084 x 1900 x 900, Bed base height (mm) ? 360, Storage/Finish ? Without Storage/Black, Material used, Headboard & Tailboard ? Rubberwood, Side panels ? Rubberwood, Bed-base Partition ? Pinewood, Top of bed base - MDF, Recommended Mattress Size King Bed ? 78? x 72? ; 4-6? thickness with Bedside Table - Dimension ? mm Overall width - 415 Overall depth ? 355 Overall height - 435 One drawer and one open shelf, Material used - Rubberwood, Finish - Black with Mattress of size 78"x72"x4" & Pillow as per direction of Engineer-in-charge.
Supplying & Installation of Queen size Box Bed with Mattress for Bed Rooms of dimensions Length - 2060.0 mm Width - 1733.0 mm Height - 930.0 mm.The materials made of Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness.Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board.Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it.Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding.Finish is of 18 mm thick Prelaminated Particle Board is in Walnut shade.Metal frames are powder coated in shade Mat Black to the thickness of 50 microns(+-10) with rigid knock down construction as per direction of Engineer-in-charge.Mattress Size King Bed ? 78? x 60? ; 4-6? thickness with Bedside Table - Dimension ? mm Overall width - 415 Overall depth ? 355 Overall height - 435 One drawer and one open shelf, Material used - Rubberwood, Finish - Black with Mattress of size 78"x60"x4" & Pillow as per direction of Engineer-in-charge.
Supplying & Installation of Queen size Box Bed with Mattress for Bed Rooms of dimensions Length - 2060.0 mm Width - 1733.0 mm Height - 930.0 mm.The materials made of Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness.Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board.Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it.Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding.Finish is of 18 mm thick Prelaminated Particle Board is in Walnut shade.Metal frames are powder coated in shade Mat Black to the thickness of 50 microns(+-10) with rigid knock down construction as per direction of Engineer-in-charge.Mattress Size King Bed ? 78? x 60? ; 4-6? thickness with Bedside Table - Dimension ? mm Overall width - 415 Overall depth ? 355 Overall height - 435 One drawer and one open shelf, Material used - Rubberwood, Finish - Black with Mattress of size 78"x60"x4" & Pillow as per direction of Engineer-in-charge.
Supplying & Installation of Queen size Plain Box Bed with Mattress 5' for Drawing Hall of dimensions Length - 2045.0 mm Width - 1599.0 mm Height - 458.0 mm.The materials made of Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness.Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board.Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it.Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding.Finish is of 18 mm thick Prelaminated Particle Board is in Walnut shade.Metal frames are powder coated in shade Mat Black to the thickness of 50 microns(+-10) with rigid knock down construction. Mattress Size King Bed ? 78? x 60? ; 4-6? thickness with Bedside Table - Dimension ? mm Overall width - 415 Overall depth ? 355 Overall height - 435 One drawer and one open shelf, Material used - Rubberwood, Finish - Black with Mattress of size 78"x60"x4" & Pillow as per direction of Engineer-in-charge.
Supplying & Installation of Queen size Plain Box Bed with Mattress 5' for Drawing Hall of dimensions Length - 2045.0 mm Width - 1599.0 mm Height - 458.0 mm.The materials made of Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness.Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board.Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it.Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding.Finish is of 18 mm thick Prelaminated Particle Board is in Walnut shade.Metal frames are powder coated in shade Mat Black to the thickness of 50 microns(+-10) with rigid knock down construction. Mattress Size King Bed ? 78? x 60? ; 4-6? thickness with Bedside Table - Dimension ? mm Overall width - 415 Overall depth ? 355 Overall height - 435 One drawer and one open shelf, Material used - Rubberwood, Finish - Black with Mattress of size 78"x60"x4" & Pillow as per direction of Engineer-in-charge.
Supplying & Installation of 2 Door Wardrobe of size 881mm W x 545mm D x 1910mm H. Wooden Wardrobe (Cola Rain) as per direction of Engineer-in-charge.
Supplying & Installation of 2 Door Wardrobe of size 881mm W x 545mm D x 1910mm H. Wooden Wardrobe (Cola Rain) as per direction of Engineer-in-charge.
Supplying & Installation of Three Seater Sofa in 3/2-BHK/VP Residence of size 1810mm W x 850mm D x 725mm H , Single Seater Sofa size 775mm W x 850mm D x 725mm H. Material -Fabric, ? Designed as an affordable solution that doesn?t compromise on function and comfort. ? Consists of three modules that can be combined to form living room layouts, or used individually to create cosy corners in a home. ? Frame crafted from Pinewood that?s obtained from New Zealand?s forests, treated to be knot-free and termite resistant to increase the durability of the sofa. ? Three-seater shape isdefined by clean and straight lines making it versatile and easy to style. ? Soft and padded edges make for a safe, childfriendly addition to spaces with centre Table as per direction of Engineer-in-charge.
Supplying & Installation of Three Seater Sofa in 3/2-BHK/VP Residence of size 1810mm W x 850mm D x 725mm H , Single Seater Sofa size 775mm W x 850mm D x 725mm H. Material -Fabric, ? Designed as an affordable solution that doesn?t compromise on function and comfort. ? Consists of three modules that can be combined to form living room layouts, or used individually to create cosy corners in a home. ? Frame crafted from Pinewood that?s obtained from New Zealand?s forests, treated to be knot-free and termite resistant to increase the durability of the sofa. ? Three-seater shape isdefined by clean and straight lines making it versatile and easy to style. ? Soft and padded edges make for a safe, childfriendly addition to spaces with centre Table as per direction of Engineer-in-charge.
Supplying & Installation of 4 Door Book Case shall have the configuration of 914mm(W)x320mm(D)x1742mm(H). The unique design provides the right rigidity to the Top hinged doors , which shall facilitate easy use. The Book Case shall be made from prime quality CRCA steel with anti rusting treatment. It shall have a Rigid Knock Down Construction. The Top Pannel, Back Pannel and Side Pannel are made from 0.7mm high yield CRCA and other components from 0.8mm CRCA. Each door shall have a 6 Lever Cam Lock with Common Key. 3mm thick glass should be used in each door for clear inside vision whih shall be secured in a metal frame through a rubber gasket. Scissor Mechanism should be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each door should be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDL capacity of max 80 Kg. The 2 Door Book Case shall have 18mm PLB Top straight edge with PVC lipping. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10) as per direction of Engineer-in-charge.
Supplying & Installation of 4 Door Book Case shall have the configuration of 914mm(W)x320mm(D)x1742mm(H). The unique design provides the right rigidity to the Top hinged doors , which shall facilitate easy use. The Book Case shall be made from prime quality CRCA steel with anti rusting treatment. It shall have a Rigid Knock Down Construction. The Top Pannel, Back Pannel and Side Pannel are made from 0.7mm high yield CRCA and other components from 0.8mm CRCA. Each door shall have a 6 Lever Cam Lock with Common Key. 3mm thick glass should be used in each door for clear inside vision whih shall be secured in a metal frame through a rubber gasket. Scissor Mechanism should be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each door should be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDL capacity of max 80 Kg. The 2 Door Book Case shall have 18mm PLB Top straight edge with PVC lipping. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10) as per direction of Engineer-in-charge.
Supplying & Installation of Dining Table 6 Seater with 6 nos. Chair-Dining Table of size 1500 x 900 x 759 ? A solid, UV cured, and matte-finished rubber wood frame with sleek curved legs, makes this table a must-have. ? The whitewash-shaded wooden frame and the rustcoloured fabric upholstery, make this dining collection an attractive addition to any home as per direction of Engineer-in-charge.
Supplying & Installation of Dining Table 6 Seater with 6 nos. Chair-Dining Table of size 1500 x 900 x 759 ? A solid, UV cured, and matte-finished rubber wood frame with sleek curved legs, makes this table a must-have. ? The whitewash-shaded wooden frame and the rustcoloured fabric upholstery, make this dining collection an attractive addition to any home as per direction of Engineer-in-charge.
Supplying & Installation of Dining Table 4 Seater with 4 nos. Chair-Dining Table of size 1200 x 900 x 759 ? A solid, UV cured, and matte-finished rubber wood frame with sleek curved legs, makes this table a must-have. ? The whitewash-shaded wooden frame and the rustcoloured fabric upholstery, make this dining collection an attractive addition to any home as per direction of Engineer-in-charge.
Supplying & Installation of Dining Table 4 Seater with 4 nos. Chair-Dining Table of size 1200 x 900 x 759 ? A solid, UV cured, and matte-finished rubber wood frame with sleek curved legs, makes this table a must-have. ? The whitewash-shaded wooden frame and the rustcoloured fabric upholstery, make this dining collection an attractive addition to any home as per direction of Engineer-in-charge.
Supplying & Installing of Seat- SHELL : The single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound (refer product catalogue for colour chart). * SHELL SIZE : 44.0 cm. (W) x 50.2 cm. (D) x 40.5 cm. (H). M.S. POWDER COATED UNDERSTRUCTURE OPTION (SM6): The powder coated (DFT 50�10 microns) welded tubular frame is made from ? 2.22 � 0.03 cm x 0.16 � 0.0128 cm M.S. E.R.W tube. The 0.16 � 0.008 cm thk CRCA sheet is welded to tubes for fixing shell to the frame. The shoe is made of high impact strength polypropylene polymer compound and are fitted at the end of the tubular frame as per direction of Engineer-in-charge.
Supplying & Installing of Seat- SHELL : The single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound (refer product catalogue for colour chart). * SHELL SIZE : 44.0 cm. (W) x 50.2 cm. (D) x 40.5 cm. (H). M.S. POWDER COATED UNDERSTRUCTURE OPTION (SM6): The powder coated (DFT 50�10 microns) welded tubular frame is made from ? 2.22 � 0.03 cm x 0.16 � 0.0128 cm M.S. E.R.W tube. The 0.16 � 0.008 cm thk CRCA sheet is welded to tubes for fixing shell to the frame. The shoe is made of high impact strength polypropylene polymer compound and are fitted at the end of the tubular frame as per direction of Engineer-in-charge.
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Mandatory | Price Trends |
|---|---|---|---|---|---|---|---|---|
| 1 | Supplying & Installation of APO Single Bed with Mattress 4" Size : WIDTH (W) - 915 MM. LENGTH (L) - 1980 MM. HEAD HEIGHT (H) - 640 MM TAIL HEIGHT (H) - 475 MM. BED FRAME : - Bed Frame Assembly is Welding of side frame, Inner slat. The side frame are made of rect. Tube 75x 25.4x1.2 mm Thk (3 nos.) & TYPE -2 SQ 19 X 1.0 (2 nos.) MM THK MS ERW Tube IS: 7138. HEAD BOARD & TAIL BOARD : - Head Board & Tail Board is made up of �16 X 1.0 mm THK MS ERW Tube IS: 7138 and support Bracket 3.2 mm THK MS Sheet IS : 513 HEAD/TAIL Board Connected with Bed Frame with M8 Bolt & Nut. FINISH - Epoxy Polyester Powder Coated - DFT 40-60 MICRON. CLADDING :- 1.2 mm THK MS SHEET per direction of Engineer-in-charge. | Supplying & Installation of APO Single Bed with Mattress 4" Size : WIDTH (W) - 915 MM. LENGTH (L) - 1980 MM. HEAD HEIGHT (H) - 640 MM TAIL HEIGHT (H) - 475 MM. BED FRAME : - Bed Frame Assembly is Welding of side frame, Inner slat. The side frame are made of rect. Tube 75x 25.4x1.2 mm Thk (3 nos.) & TYPE -2 SQ 19 X 1.0 (2 nos.) MM THK MS ERW Tube IS: 7138. HEAD BOARD & TAIL BOARD : - Head Board & Tail Board is made up of �16 X 1.0 mm THK MS ERW Tube IS: 7138 and support Bracket 3.2 mm THK MS Sheet IS : 513 HEAD/TAIL Board Connected with Bed Frame with M8 Bolt & Nut. FINISH - Epoxy Polyester Powder Coated - DFT 40-60 MICRON. CLADDING :- 1.2 mm THK MS SHEET per direction of Engineer-in-charge. | 506 | each | - | - | Yes | |
| 2 | Supplying & Installation of Seat- SHELL : The single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound (refer product catalogue for colour chart). * SHELL SIZE : 44.0 cm. (W) x 50.2 cm. (D) x 40.5 cm. (H). M.S. POWDER COATED UNDERSTRUCTURE OPTION (SM6): The powder coated (DFT 50�10 microns) welded tubular frame is made from ? 2.22 � 0.03 cm x 0.16 � 0.0128 cm M.S. E.R.W tube. The 0.16 � 0.008 cm thk CRCA sheet is welded to tubes for fixing shell to the frame. The shoe is made of high impact strength polypropylene polymer compound and are fitted at the end of the tubular frame per direction of Engineer-in-charge. | Supplying & Installation of Seat- SHELL : The single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound (refer product catalogue for colour chart). * SHELL SIZE : 44.0 cm. (W) x 50.2 cm. (D) x 40.5 cm. (H). M.S. POWDER COATED UNDERSTRUCTURE OPTION (SM6): The powder coated (DFT 50�10 microns) welded tubular frame is made from ? 2.22 � 0.03 cm x 0.16 � 0.0128 cm M.S. E.R.W tube. The 0.16 � 0.008 cm thk CRCA sheet is welded to tubes for fixing shell to the frame. The shoe is made of high impact strength polypropylene polymer compound and are fitted at the end of the tubular frame per direction of Engineer-in-charge. | 504 | each | - | - | Yes | |
| 3 | Supplying & Installation of King Bed with Mattress - Dimension (LxWxH) ? mm King Bed ? 2084 x 1900 x 900, Bed base height (mm) ? 360, Storage/Finish ? Without Storage/Black, Material used, Headboard & Tailboard ? Rubberwood, Side panels ? Rubberwood, Bed-base Partition ? Pinewood, Top of bed base - MDF, Recommended Mattress Size King Bed ? 78? x 72? ; 4-6? thickness with Mattress of size 78"x72"x4" & Pillow per direction of Engineer-in-charge. | Supplying & Installation of King Bed with Mattress - Dimension (LxWxH) ? mm King Bed ? 2084 x 1900 x 900, Bed base height (mm) ? 360, Storage/Finish ? Without Storage/Black, Material used, Headboard & Tailboard ? Rubberwood, Side panels ? Rubberwood, Bed-base Partition ? Pinewood, Top of bed base - MDF, Recommended Mattress Size King Bed ? 78? x 72? ; 4-6? thickness with Mattress of size 78"x72"x4" & Pillow per direction of Engineer-in-charge. | 48 | each | - | - | Yes | |
| 4 | Supplying & Installation of Bed side Table - Dimension ? mm Overall width - 415 Overall depth ? 355 Overall height - 435 One drawer and one open shelf, Material used - Rubberwood, Finish - Black as per direction of Engineer-in-charge. | Supplying & Installation of Bed side Table - Dimension ? mm Overall width - 415 Overall depth ? 355 Overall height - 435 One drawer and one open shelf, Material used - Rubberwood, Finish - Black as per direction of Engineer-in-charge. | 24 | each | - | - | Yes | |
| 5 | Supplying & Installation of Bed with Mattress 4" of size - Length - 2056.0 mm, Width - 1876.0 mm, Height - 930.0 mm. Material- Bed Structure consist of metal frames made of M.S. 25 mm square Pipes in 1.2 mm Thickness & M.S. Channels in 1.0 mm thickness. Partition panels & Plinths are made of 25 mm Thick Prelaminated Particle Board. Head board is made of 25 mm thick P.V.C. membrane pressed MDF. Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it. Side board, mattress panels, bottom panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges edge banded with 0.8 mm thick PVC edge banding. Finish- PVC membrane pressed MDF of Head Board is in Lime Oak finish. 18 mm thick Prelaminated Particle Board is in Maple shade. Metal frames are powder coated in shade Metallic Silver Grey to thickness of 50 microns(+-10) as per direction of Engineer-in-charge. | Supplying & Installation of Bed with Mattress 4" of size - Length - 2056.0 mm, Width - 1876.0 mm, Height - 930.0 mm. Material- Bed Structure consist of metal frames made of M.S. 25 mm square Pipes in 1.2 mm Thickness & M.S. Channels in 1.0 mm thickness. Partition panels & Plinths are made of 25 mm Thick Prelaminated Particle Board. Head board is made of 25 mm thick P.V.C. membrane pressed MDF. Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it. Side board, mattress panels, bottom panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges edge banded with 0.8 mm thick PVC edge banding. Finish- PVC membrane pressed MDF of Head Board is in Lime Oak finish. 18 mm thick Prelaminated Particle Board is in Maple shade. Metal frames are powder coated in shade Metallic Silver Grey to thickness of 50 microns(+-10) as per direction of Engineer-in-charge. | 24 | each | - | - | Yes | |
| 6 | Supplying & Installation of Three Seater Sofa size 1810mm W x 850mm D x 725mm H , Single Seater Sofa size 775mm W x 850mm D x 725mm H. Material -Fabric, ? Designed as an affordable solution that doesn?t compromise on function and comfort. ? Consists of three modules that can be combined to form living room layouts, or used individually to create cosy corners in a home. ? Frame crafted from Pinewood that?s obtained from New Zealand?s forests, treated to be knot-free and termite resistant to increase the durability of the sofa. ? Three-seater shape isdefined by clean and straight lines making it versatile and easy to style. ? Soft and padded edges make for a safe, childfriendly addition to spaces. with Coffee Table of size Dimensions W x H x D (cm) - 120 x 45 x 60, Finish Color - Remini Walnut, Primary Material - Prelaminated Particle Board, Style- Contemporary & Modern as per direction of Engineer-in-charge. | Supplying & Installation of Three Seater Sofa size 1810mm W x 850mm D x 725mm H , Single Seater Sofa size 775mm W x 850mm D x 725mm H. Material -Fabric, ? Designed as an affordable solution that doesn?t compromise on function and comfort. ? Consists of three modules that can be combined to form living room layouts, or used individually to create cosy corners in a home. ? Frame crafted from Pinewood that?s obtained from New Zealand?s forests, treated to be knot-free and termite resistant to increase the durability of the sofa. ? Three-seater shape isdefined by clean and straight lines making it versatile and easy to style. ? Soft and padded edges make for a safe, childfriendly addition to spaces. with Coffee Table of size Dimensions W x H x D (cm) - 120 x 45 x 60, Finish Color - Remini Walnut, Primary Material - Prelaminated Particle Board, Style- Contemporary & Modern as per direction of Engineer-in-charge. | 30 | each | - | - | Yes | |
| 7 | Supplying & Installation of Canteen Table 4 Seater PU Coated size shall be 1135 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking as per direction of Engineer-in-charge. | Supplying & Installation of Canteen Table 4 Seater PU Coated size shall be 1135 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking as per direction of Engineer-in-charge. | 200 | each | - | - | Yes | |
| 8 | Supplying & Installation of Seat- SHELL : The single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound (refer product catalogue for colour chart). * SHELL SIZE : 44.0 cm. (W) x 50.2 cm. (D) x 40.5 cm. (H). M.S. POWDER COATED UNDERSTRUCTURE OPTION (SM6): The powder coated (DFT 50�10 microns) welded tubular frame is made from ? 2.22 � 0.03 cm x 0.16 � 0.0128 cm M.S. E.R.W tube. The 0.16 � 0.008 cm thk CRCA sheet is welded to tubes for fixing shell to the frame. The shoe is made of high impact strength polypropylene polymer compound and are fitted at the end of the tubular frame as per direction of Engineer-in-charge. | Supplying & Installation of Seat- SHELL : The single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound (refer product catalogue for colour chart). * SHELL SIZE : 44.0 cm. (W) x 50.2 cm. (D) x 40.5 cm. (H). M.S. POWDER COATED UNDERSTRUCTURE OPTION (SM6): The powder coated (DFT 50�10 microns) welded tubular frame is made from ? 2.22 � 0.03 cm x 0.16 � 0.0128 cm M.S. E.R.W tube. The 0.16 � 0.008 cm thk CRCA sheet is welded to tubes for fixing shell to the frame. The shoe is made of high impact strength polypropylene polymer compound and are fitted at the end of the tubular frame as per direction of Engineer-in-charge. | 1,000 | each | - | - | Yes | |
| 9 | Supplying & Installation of Box Bed for master bed room with Mattress - Dimension (LxWxH) ? mm King size Bed ? 2084 x 1900 x 900, Bed base height (mm) ? 360, Storage/Finish ? Without Storage/Black, Material used, Headboard & Tailboard ? Rubberwood, Side panels ? Rubberwood, Bed-base Partition ? Pinewood, Top of bed base - MDF, Recommended Mattress Size King Bed ? 78? x 72? ; 4-6? thickness with Bedside Table - Dimension ? mm Overall width - 415 Overall depth ? 355 Overall height - 435 One drawer and one open shelf, Material used - Rubberwood, Finish - Black with Mattress of size 78"x72"x4" & Pillow as per direction of Engineer-in-charge. | Supplying & Installation of Box Bed for master bed room with Mattress - Dimension (LxWxH) ? mm King size Bed ? 2084 x 1900 x 900, Bed base height (mm) ? 360, Storage/Finish ? Without Storage/Black, Material used, Headboard & Tailboard ? Rubberwood, Side panels ? Rubberwood, Bed-base Partition ? Pinewood, Top of bed base - MDF, Recommended Mattress Size King Bed ? 78? x 72? ; 4-6? thickness with Bedside Table - Dimension ? mm Overall width - 415 Overall depth ? 355 Overall height - 435 One drawer and one open shelf, Material used - Rubberwood, Finish - Black with Mattress of size 78"x72"x4" & Pillow as per direction of Engineer-in-charge. | 86 | each | - | - | Yes | |
| 10 | Supplying & Installation of Queen size Box Bed with Mattress for Bed Rooms of dimensions Length - 2060.0 mm Width - 1733.0 mm Height - 930.0 mm.The materials made of Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness.Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board.Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it.Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding.Finish is of 18 mm thick Prelaminated Particle Board is in Walnut shade.Metal frames are powder coated in shade Mat Black to the thickness of 50 microns(+-10) with rigid knock down construction as per direction of Engineer-in-charge.Mattress Size King Bed ? 78? x 60? ; 4-6? thickness with Bedside Table - Dimension ? mm Overall width - 415 Overall depth ? 355 Overall height - 435 One drawer and one open shelf, Material used - Rubberwood, Finish - Black with Mattress of size 78"x60"x4" & Pillow as per direction of Engineer-in-charge. | Supplying & Installation of Queen size Box Bed with Mattress for Bed Rooms of dimensions Length - 2060.0 mm Width - 1733.0 mm Height - 930.0 mm.The materials made of Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness.Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board.Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it.Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding.Finish is of 18 mm thick Prelaminated Particle Board is in Walnut shade.Metal frames are powder coated in shade Mat Black to the thickness of 50 microns(+-10) with rigid knock down construction as per direction of Engineer-in-charge.Mattress Size King Bed ? 78? x 60? ; 4-6? thickness with Bedside Table - Dimension ? mm Overall width - 415 Overall depth ? 355 Overall height - 435 One drawer and one open shelf, Material used - Rubberwood, Finish - Black with Mattress of size 78"x60"x4" & Pillow as per direction of Engineer-in-charge. | 193 | each | - | - | Yes | |
| 11 | Supplying & Installation of Queen size Plain Box Bed with Mattress 5' for Drawing Hall of dimensions Length - 2045.0 mm Width - 1599.0 mm Height - 458.0 mm.The materials made of Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness.Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board.Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it.Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding.Finish is of 18 mm thick Prelaminated Particle Board is in Walnut shade.Metal frames are powder coated in shade Mat Black to the thickness of 50 microns(+-10) with rigid knock down construction. Mattress Size King Bed ? 78? x 60? ; 4-6? thickness with Bedside Table - Dimension ? mm Overall width - 415 Overall depth ? 355 Overall height - 435 One drawer and one open shelf, Material used - Rubberwood, Finish - Black with Mattress of size 78"x60"x4" & Pillow as per direction of Engineer-in-charge. | Supplying & Installation of Queen size Plain Box Bed with Mattress 5' for Drawing Hall of dimensions Length - 2045.0 mm Width - 1599.0 mm Height - 458.0 mm.The materials made of Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness.Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board.Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it.Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding.Finish is of 18 mm thick Prelaminated Particle Board is in Walnut shade.Metal frames are powder coated in shade Mat Black to the thickness of 50 microns(+-10) with rigid knock down construction. Mattress Size King Bed ? 78? x 60? ; 4-6? thickness with Bedside Table - Dimension ? mm Overall width - 415 Overall depth ? 355 Overall height - 435 One drawer and one open shelf, Material used - Rubberwood, Finish - Black with Mattress of size 78"x60"x4" & Pillow as per direction of Engineer-in-charge. | 126 | each | - | - | Yes | |
| 12 | Supplying & Installation of 2 Door Wardrobe of size 881mm W x 545mm D x 1910mm H. Wooden Wardrobe (Cola Rain) as per direction of Engineer-in-charge. | Supplying & Installation of 2 Door Wardrobe of size 881mm W x 545mm D x 1910mm H. Wooden Wardrobe (Cola Rain) as per direction of Engineer-in-charge. | 299 | each | - | - | Yes | |
| 13 | Supplying & Installation of Three Seater Sofa in 3/2-BHK/VP Residence of size 1810mm W x 850mm D x 725mm H , Single Seater Sofa size 775mm W x 850mm D x 725mm H. Material -Fabric, ? Designed as an affordable solution that doesn?t compromise on function and comfort. ? Consists of three modules that can be combined to form living room layouts, or used individually to create cosy corners in a home. ? Frame crafted from Pinewood that?s obtained from New Zealand?s forests, treated to be knot-free and termite resistant to increase the durability of the sofa. ? Three-seater shape isdefined by clean and straight lines making it versatile and easy to style. ? Soft and padded edges make for a safe, childfriendly addition to spaces with centre Table as per direction of Engineer-in-charge. | Supplying & Installation of Three Seater Sofa in 3/2-BHK/VP Residence of size 1810mm W x 850mm D x 725mm H , Single Seater Sofa size 775mm W x 850mm D x 725mm H. Material -Fabric, ? Designed as an affordable solution that doesn?t compromise on function and comfort. ? Consists of three modules that can be combined to form living room layouts, or used individually to create cosy corners in a home. ? Frame crafted from Pinewood that?s obtained from New Zealand?s forests, treated to be knot-free and termite resistant to increase the durability of the sofa. ? Three-seater shape isdefined by clean and straight lines making it versatile and easy to style. ? Soft and padded edges make for a safe, childfriendly addition to spaces with centre Table as per direction of Engineer-in-charge. | 100 | each | - | - | Yes | |
| 14 | Supplying & Installation of 4 Door Book Case shall have the configuration of 914mm(W)x320mm(D)x1742mm(H). The unique design provides the right rigidity to the Top hinged doors , which shall facilitate easy use. The Book Case shall be made from prime quality CRCA steel with anti rusting treatment. It shall have a Rigid Knock Down Construction. The Top Pannel, Back Pannel and Side Pannel are made from 0.7mm high yield CRCA and other components from 0.8mm CRCA. Each door shall have a 6 Lever Cam Lock with Common Key. 3mm thick glass should be used in each door for clear inside vision whih shall be secured in a metal frame through a rubber gasket. Scissor Mechanism should be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each door should be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDL capacity of max 80 Kg. The 2 Door Book Case shall have 18mm PLB Top straight edge with PVC lipping. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10) as per direction of Engineer-in-charge. | Supplying & Installation of 4 Door Book Case shall have the configuration of 914mm(W)x320mm(D)x1742mm(H). The unique design provides the right rigidity to the Top hinged doors , which shall facilitate easy use. The Book Case shall be made from prime quality CRCA steel with anti rusting treatment. It shall have a Rigid Knock Down Construction. The Top Pannel, Back Pannel and Side Pannel are made from 0.7mm high yield CRCA and other components from 0.8mm CRCA. Each door shall have a 6 Lever Cam Lock with Common Key. 3mm thick glass should be used in each door for clear inside vision whih shall be secured in a metal frame through a rubber gasket. Scissor Mechanism should be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each door should be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDL capacity of max 80 Kg. The 2 Door Book Case shall have 18mm PLB Top straight edge with PVC lipping. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10) as per direction of Engineer-in-charge. | 50 | each | - | - | Yes | |
| 15 | Supplying & Installation of Dining Table 6 Seater with 6 nos. Chair-Dining Table of size 1500 x 900 x 759 ? A solid, UV cured, and matte-finished rubber wood frame with sleek curved legs, makes this table a must-have. ? The whitewash-shaded wooden frame and the rustcoloured fabric upholstery, make this dining collection an attractive addition to any home as per direction of Engineer-in-charge. | Supplying & Installation of Dining Table 6 Seater with 6 nos. Chair-Dining Table of size 1500 x 900 x 759 ? A solid, UV cured, and matte-finished rubber wood frame with sleek curved legs, makes this table a must-have. ? The whitewash-shaded wooden frame and the rustcoloured fabric upholstery, make this dining collection an attractive addition to any home as per direction of Engineer-in-charge. | 98 | each | - | - | Yes | |
| 16 | Supplying & Installation of Dining Table 4 Seater with 4 nos. Chair-Dining Table of size 1200 x 900 x 759 ? A solid, UV cured, and matte-finished rubber wood frame with sleek curved legs, makes this table a must-have. ? The whitewash-shaded wooden frame and the rustcoloured fabric upholstery, make this dining collection an attractive addition to any home as per direction of Engineer-in-charge. | Supplying & Installation of Dining Table 4 Seater with 4 nos. Chair-Dining Table of size 1200 x 900 x 759 ? A solid, UV cured, and matte-finished rubber wood frame with sleek curved legs, makes this table a must-have. ? The whitewash-shaded wooden frame and the rustcoloured fabric upholstery, make this dining collection an attractive addition to any home as per direction of Engineer-in-charge. | 20 | each | - | - | Yes | |
| 17 | Supplying & Installing of Seat- SHELL : The single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound (refer product catalogue for colour chart). * SHELL SIZE : 44.0 cm. (W) x 50.2 cm. (D) x 40.5 cm. (H). M.S. POWDER COATED UNDERSTRUCTURE OPTION (SM6): The powder coated (DFT 50�10 microns) welded tubular frame is made from ? 2.22 � 0.03 cm x 0.16 � 0.0128 cm M.S. E.R.W tube. The 0.16 � 0.008 cm thk CRCA sheet is welded to tubes for fixing shell to the frame. The shoe is made of high impact strength polypropylene polymer compound and are fitted at the end of the tubular frame as per direction of Engineer-in-charge. | Supplying & Installing of Seat- SHELL : The single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound (refer product catalogue for colour chart). * SHELL SIZE : 44.0 cm. (W) x 50.2 cm. (D) x 40.5 cm. (H). M.S. POWDER COATED UNDERSTRUCTURE OPTION (SM6): The powder coated (DFT 50�10 microns) welded tubular frame is made from ? 2.22 � 0.03 cm x 0.16 � 0.0128 cm M.S. E.R.W tube. The 0.16 � 0.008 cm thk CRCA sheet is welded to tubes for fixing shell to the frame. The shoe is made of high impact strength polypropylene polymer compound and are fitted at the end of the tubular frame as per direction of Engineer-in-charge. | 300 | each | - | - | Yes |
Discover companies most likely to bid on this tender
Life Insurance Corporation of India
📍 NALANDA, BIHAR
Panchayati Raj Department
📍 MUZAFFARPUR, BIHAR
Gujarat State Police Housing Corporation Ltd
📍 RAJKOT, GUJARAT
📍 ANDHRA PRADESH
Director Cum Chief Engineer RED
📍 AGRA, UTTAR PRADESH
Sign up now to access all documents
NIT
NIT
BOQ
NIT
NIT
NIT