Contract Bidding Open For Supply and Fixing Gypboard Partition,Supply and Fixing of Partical Board Partition,Supply and Apply in HYDERABAD, TELANGANA

Supply and Fixing of 75mm Thick metal stud partition using 12mm Thick Gypboard conforming to IS-2095-1982. Screw fixed to either side to 48mm Studs of 0.55mm thick with the 50mm floor and ceiling channel 0.55mm and the Joints duly finished with joint compound paper tape and two coats Dry wall top coat as per specification and including 50mm thick Glass wool in the inside of Partition Board for soundproofing including, all leads and lifts etc complete as directed by the dept .

Supply and applying of wall putty white cement/polymer/cement/based putty of average 1 to 2mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered material, applying emery paper, sand the surface, clean and wipe of loose dust applying knifing paste filler putty knife/mullion pad, air dry for 2-3 hours, sand with 180 and 320 nos. emery paper for the surface preparation including cost and conveyance of all materials for work site and all operational incidental labour charges complete for finished item of work for partition for all floors including overheads and including seigniorage charges etc, complete

Supplying and fixing Gyp Board Suspended regular single layer partition (GS-MFSC-4.1 as per India Gypsum) using 75 mm thick Gyp Board conforming to IS 2095-1982 fixing to Gyp steel Gl perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall top coat complete for finished item of work as per India Gypsum Ltd specification

MINERAL FIBRE GRID FALSE CEILING as per specifications provided in the bid document