Directorate Of Employment & Training Gujarat Hammer & Tool Kit Procurement Anand Gujarat 2026 ISI/ISO Standards
Progress
Tender Overview
The Directorate Of Employment & Training, Gujarat Labour And Employment Department, invites bids for a broad assortment of hand tools and power tools across 72 items, including HAMMER CROSS PEIN 220/250 GRAMS, CHISEL FLAT 25 MM x 200 MM, 1-12 MM HEX KEY SET, BRADAWL 150 MM x 6 MM, MALLET 0.50 KG, HACKSAW FRAME 150 MM, insulated PLIERs, DRILL HAND BRACE 0-100 MM, PLANE JACK 200 MM x 50 MM, PLANES, CUTTING TOOLS, RELAYS, VARNISHES AND POWER TOOLS FOR ELECTRIFICATION AND MECHANICAL SERVICE.
- Location: ANAND, GUJARAT - 387210
- Estimated value: ₹494730.00
- Delivery context includes varied workshop tools and electrical components to support industrial training programs
- 72-item BOQ with broad category coverage, including mechanical hand tools and electrical/electronic components
- Unique scope includes OEM-style tooling and standardized parts for vocational training labs
Technical Specifications & Requirements
- Item scope includes CROSS PEIN HAMMER 220-250 g or 0.5 lb, CHISEL FLAT 25 MM x 200 MM, SET OF 12 HEX KEYS (1-12 MM), BRADAWL 150 MM x 6 MM, MALLET 0.50 KG, HACKSAW FRAME FIXED 150 MM, FLAT NOSE PLIER 200 MM INSULATED, HAND BRACE 0-100 MM, PLANE JACK 200 MM x 50 MM, PLANE SMOOTHING, and assorted cutting, riveting and measurement tools
- Electrical and equipment subset includes ELECTRIC IRON 1200 W, 230 V with temperature control, ** immersion heater 1500 W 230 V**, MIXER GRINDER 750 W, 240 V, VOLTAGE STABILISER 150-230 V input / 220 V output, D.C. STARTERS for 2.5 KW DC motor, AC STARTER RESISTANCE TYPE STARTER
- Mechanical and valve components include various gate/ball/diaphragm valves (2 INCH), pump models, and general hardware including D.B. tools, screw driver sets, calipers, and reamers
- Compliance notes reference Gujarat State Procurement Policy, 2024; no explicit ISO/IS codes shown in data but standardization expectations will apply
- 72-item scope implies a wide variety of sizes, capacities and part numbers; bidders should ensure OEM compatibility and lab-ready packaging
Terms & Eligibility
- Quantity variation rights up to 25% during contract execution
- Three-year turnover criterion to be satisfied as per bid document (audited statements or CA certification)
- EMD submission via Demand Draft payable to the Principal Industrial Training Institute Vasad, Anand; hardcopy delivery within 5 days of bid end/opening
- GST compliance responsibility rests with bidder; reimbursement as applicable per rates and cap
- Supply must align with Additional Terms & Conditions and Gujarat State Procurement Policy, 2024; delivery timelines linked to original/extended delivery periods
- No tender ID or dates in content; ensure bid readiness with necessary financials, GST, and turnover documentation
Key Specifications
-
HAMMER CROSS PEIN 220 GRAMS OR 250 GRAMS OR 0.5 LB
-
CHISEL COLD FLAT 25 MM X 200 MM
-
SET OF 12 HEX KEYS (1-12 MM)
-
BRADAWL 150 MM X 6 MM SQUARE POINTED
-
MALLET 0.50 KG
-
HACKSAW FRAME FIXED TYPE 150 MM
-
PLIERS FLAT NOSE LENGTH 200 MM INSULATED
-
DRILL HAND BRACE 0 TO 100 MM
-
PLANE JACK 200 MM X 50 MM
-
ELECTRIC IRON 1200 W, 230 V WITH TEMPERATURE CONTROL
-
IMMERSION HEATER 1500 W 230 V
-
MIXTURE OR MIXER GRINDER 750 W, 240 V
-
VOLTAGE STABILISER INPUT 150-230 V, OUTPUT 220 V AC
-
VALVE SETS: GATE, GLOBE, NEEDLE, BUTTERFLY, DIAPHRAGM, NON RETURN, PNEUMATICALLY OPERATED DIAPHRAGM, 2 INCH
-
PUMPS: RECIPROCATING/PUMP MODEL, CENTRIFUGAL PUMP BACK PULLOUT
-
Other lab tools: Calipers, Scribers, Files, Reamers, Beakers, Thermocouples, Scriber 150 mm
Terms & Conditions
-
EMD to be submitted as DD and uploaded with bid; hardcopy to be delivered within 5 days
-
Turnover criteria must be satisfied from last three financial years; audited statements or CA certificate required
-
Delivery period and quantity variation rights up to 25% during and after contract; adapt delivery timeline accordingly
Important Clauses
Payment Terms
GST applicable on quoted value; reimbursement as per actual rates; bidder to comply with Gujarat procurement policy and ATC terms
Delivery Schedule
Delivery period linked to original delivery order; option to extend with 30+ days minimum when quantity increases; extended duration based on (additional quantity/original quantity) × original period
Penalties/Liquidated Damages
Not explicitly listed; LD provisions to be governed by ATC and Gujarat State Procurement Policy 2024
Bidder Eligibility
-
Minimum average annual turnover as specified in bid document (last 3 years)
-
Not under liquidation or similar proceedings
-
GST compliance and valid GST registration
Tender Data
Bid Details
Quantity
286
Category
CUT SECTION GATE VALVE 2 INCH
Bid Type
Two Packet Bid
Bid Validity
180 (Days)
Bid Type
Service
Evaluation
Item wise evaluation
Inspection Required
No
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
No
MII Purchase Preference
No
MSE Purchase Preference
No
MSE Exemption/Relaxation
No
Startup Exemption/Relaxation
Yes
Bid Splitting Applied
No
Requirements
Min. Avg. Annual Turnover
247
Experience Required
3 Year (s)
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
HAMMER CROSS PEIN 220 GRAMS OR 250 GRAMS OR 0.5 LB WITH HANDLE , CHISEL COLD FLAT 25 MM X 200 MM , ALLEN KEY SET - HEXAGONAL - 1 - 12 MM, SET OF 12 KEYS , BRADAWL 150 MM X 6MM SQUARE POINTED , MALLET HARD WOOD 0.50 KG. , HACKSAW FRAME FIXED TYPE 150 MM , PLIER FLAT NOSE LENGTH 200 MM INSULATED , DRILL HAND BRACE 0 TO 100 MM , PLANE- JACK 200 MM X 50 MM , PLANE SMOOTHING, METAL 200 MM X 50 MM CUTTER , CUT OUT RELAYS , REVERSE CURRENT RELAYS , UNDER VOLTAGE RELAYS , KNIFE SWITCH DPDT FITTED WITH FUSE TERMINALS 16 AMP , KNIFE SWITCH TPDT FITTED WITH FUSE TERMINALS16 AMP , D.C. STARTERS-4-POINTS FOR 2.5 KW DC MOTOR , AC STARTER RESISTANCE TYPE STARTER , ELECTRIC IRON 1200 W, 230 V WITH TEMPRATURE CONTROL. , IMMERSION HEATER 1500 W -230 V , MIXTURE OR MIXER GRINDER 750 W, 240 V , VOLTAGE STABILISER INPUT 150 TO 230 VOLT AC, OUTPUT 220 VOLT AC , ANVIL 50 KGS , TONG FLAT.200 MM LONG , SIMPLE MACHINES SCREW JACK WITH ACCESSORIES , THERMOCOUPLES J K R S B TYPE EACH , STEAM GENERATOR COPPER FOR STEAM DISTILATION. CAP 1000 ML , SEARLES APPARETUS FOR YOUNGS MODULUS , REDWOOD VISCOMETER , TEST TUBE HOLDERS , Caliper inside spring type. 150 mm , Caliper hermaphrodite spring type 150 mm , Scriber 150 mm , Dot punch 100 mm , File knife edge smooth 150 mm , Machine Reamer parallel Helical flute 12 TO 16 mm set of 5 , Scraper half round 150 mm , Chisel cold crosscut AND diamond point 9 mm X 150 mm , Chisel cold round nose 9 mm X 100 mm , Fire buckets WITH STAND , Power tools for fastening Capacity 10 TO 18mm , Pipe threading die with handle Ratchet type Die head of ONE BY TWO INCH, THREE BY FOUR INCH, ONE INCH COMPLETE SET , Planishing hammer , Engineers try square knife edge 150 mm Blade , CUT SECTION GATE VALVE 2 INCH , CUT SECTION GLOBE VALVE 2 INCH , CUT SECTION SAFETY VALVE 2 INCH , CUT SECTION NEEDLE VALVE 25 MM CUT SECTION MADE UP S.S. OF 2 INCH , CUT SECTION BUTTER FLY VALVE 2 INCH , CUT SECTION NON RETURN VALVE 2 INCH , CUT SECTION PNEUMATICALLY OPERATED DIAPHRAGM VALVE 2 INCH , CUT SECTION BALL VALVE 2 INCH , CUT SECTION DIAPHRAGM VALVE 2 INCH , CUT SECTION MODEL OF SCREW PUMP , VANE PUMP CUT SECTION SLIDING TYPE , CUT SECTION MODEL OF RECIPROCATING PUMP , CUT SECTION OF GEAR BOX PLANETARY BEVEL GEAR TYPE , CUT SECTION MODEL OF CENTRIFUGAL PUMP BACK PULLOUT TYPE , SCRAPER FLAT 250MM HANDLED , Knife Electrician D.B. , Screw Driver Set set of 5 100 TO 300 mm , Conduit pipe cutting and threading machines adjustable for 15 mm to 30 mm , Hot wire Ammeter 0 TO 15 Amps , Wheatstone Bridge , Autotransformer 250V 10A , Solid State Solar Based Single Phase Energy Meter Bidirectional 5 TO 30 Amps 240 Volts , Magnetic Flux Meter 0 TO 500 tesla , Small crimping tools assorted 10 TO 100 mm 5 NOS , Motion Detector , Soft starter 1 ph , Field regulator 0 - 1000 ohmic, 2 Amps , DMX Controller , Rewinding Machine
Delivery Details
Max Delivery Days
15
Delivery Locations
1
Delivery Cities
Anand
Delivery Pincodes
388306
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Sarvaiya Shilpaben | 388306,GOVT. INDUSTRIAL TRAINING INSTITUTE, VASAD, B/H. PAYAL CINEMA, TA/DI - ANAND | Anand | Gujarat | 388306 | 8 | 15 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-9882347.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
72 Items Sign in to view GEM price trends Sign in for GEM prices
HAMMER CROSS PEIN 220 GRAMS OR 250 GRAMS OR 0.5 LB WITH HANDLE
HAMMER CROSS PEIN 220 GRAMS OR 250 GRAMS OR 0.5 LB WITH HANDLE
CHISEL COLD FLAT 25 MM X 200 MM
CHISEL COLD FLAT 25 MM X 200 MM
ALLEN KEY SET - HEXAGONAL - 1 - 12 MM, SET OF 12 KEYS
ALLEN KEY SET - HEXAGONAL - 1 - 12 MM, SET OF 12 KEYS
BRADAWL 150 MM X 6MM SQUARE POINTED
BRADAWL 150 MM X 6MM SQUARE POINTED
MALLET HARD WOOD 0.50 KG.
MALLET HARD WOOD 0.50 KG.
HACKSAW FRAME FIXED TYPE 150 MM
HACKSAW FRAME FIXED TYPE 150 MM
PLIER FLAT NOSE LENGTH 200 MM INSULATED
PLIER FLAT NOSE LENGTH 200 MM INSULATED
DRILL HAND BRACE 0 TO 100 MM
DRILL HAND BRACE 0 TO 100 MM
PLANE- JACK 200 MM X 50 MM
PLANE- JACK 200 MM X 50 MM
PLANE SMOOTHING, METAL 200 MM X 50 MM CUTTER
PLANE SMOOTHING, METAL 200 MM X 50 MM CUTTER
CUT OUT RELAYS
CUT OUT RELAYS
REVERSE CURRENT RELAYS
REVERSE CURRENT RELAYS
UNDER VOLTAGE RELAYS
UNDER VOLTAGE RELAYS
KNIFE SWITCH DPDT FITTED WITH FUSE TERMINALS 16 AMP
KNIFE SWITCH DPDT FITTED WITH FUSE TERMINALS 16 AMP
KNIFE SWITCH TPDT FITTED WITH FUSE TERMINALS16 AMP
KNIFE SWITCH TPDT FITTED WITH FUSE TERMINALS16 AMP
D.C. STARTERS-4-POINTS FOR 2.5 KW DC MOTOR
D.C. STARTERS-4-POINTS FOR 2.5 KW DC MOTOR
AC STARTER RESISTANCE TYPE STARTER
AC STARTER RESISTANCE TYPE STARTER
ELECTRIC IRON 1200 W, 230 V WITH TEMPRATURE CONTROL.
ELECTRIC IRON 1200 W, 230 V WITH TEMPRATURE CONTROL.
IMMERSION HEATER 1500 W -230 V
IMMERSION HEATER 1500 W -230 V
MIXTURE OR MIXER GRINDER 750 W, 240 V
MIXTURE OR MIXER GRINDER 750 W, 240 V
VOLTAGE STABILISER INPUT 150 TO 230 VOLT AC, OUTPUT 220 VOLT AC
VOLTAGE STABILISER INPUT 150 TO 230 VOLT AC, OUTPUT 220 VOLT AC
ANVIL 50 KGS
ANVIL 50 KGS
TONG FLAT.200 MM LONG
TONG FLAT.200 MM LONG
SIMPLE MACHINES SCREW JACK WITH ACCESSORIES
SIMPLE MACHINES SCREW JACK WITH ACCESSORIES
THERMOCOUPLES J K R S B TYPE EACH
THERMOCOUPLES J K R S B TYPE EACH
STEAM GENERATOR COPPER FOR STEAM DISTILATION. CAP 1000 ML
STEAM GENERATOR COPPER FOR STEAM DISTILATION. CAP 1000 ML
SEARLES APPARETUS FOR YOUNGS MODULUS
SEARLES APPARETUS FOR YOUNGS MODULUS
REDWOOD VISCOMETER
REDWOOD VISCOMETER
TEST TUBE HOLDERS
TEST TUBE HOLDERS
Caliper inside spring type. 150 mm
Caliper inside spring type. 150 mm
Caliper hermaphrodite spring type 150 mm
Caliper hermaphrodite spring type 150 mm
Scriber 150 mm
Scriber 150 mm
Dot punch 100 mm
Dot punch 100 mm
File knife edge smooth 150 mm
File knife edge smooth 150 mm
Machine Reamer parallel Helical flute 12 TO 16 mm set of 5
Machine Reamer parallel Helical flute 12 TO 16 mm set of 5
Scraper half round 150 mm
Scraper half round 150 mm
Chisel cold crosscut AND diamond point 9 mm X 150 mm
Chisel cold crosscut AND diamond point 9 mm X 150 mm
Chisel cold round nose 9 mm X 100 mm
Chisel cold round nose 9 mm X 100 mm
Fire buckets WITH STAND
Fire buckets WITH STAND
Power tools for fastening Capacity 10 TO 18mm
Power tools for fastening Capacity 10 TO 18mm
Pipe threading die with handle Ratchet type Die head of ONE BY TWO INCH, THREE BY FOUR INCH, ONE INCH COMPLETE SET
Pipe threading die with handle Ratchet type Die head of ONE BY TWO INCH, THREE BY FOUR INCH, ONE INCH COMPLETE SET
Planishing hammer
Planishing hammer
Engineers try square knife edge 150 mm Blade
Engineers try square knife edge 150 mm Blade
CUT SECTION GATE VALVE 2 INCH
CUT SECTION GATE VALVE 2 INCH
CUT SECTION GLOBE VALVE 2 INCH
CUT SECTION GLOBE VALVE 2 INCH
CUT SECTION SAFETY VALVE 2 INCH
CUT SECTION SAFETY VALVE 2 INCH
CUT SECTION NEEDLE VALVE 25 MM CUT SECTION MADE UP S.S. OF 2 INCH
CUT SECTION NEEDLE VALVE 25 MM CUT SECTION MADE UP S.S. OF 2 INCH
CUT SECTION BUTTER FLY VALVE 2 INCH
CUT SECTION BUTTER FLY VALVE 2 INCH
CUT SECTION NON RETURN VALVE 2 INCH
CUT SECTION NON RETURN VALVE 2 INCH
CUT SECTION PNEUMATICALLY OPERATED DIAPHRAGM VALVE 2 INCH
CUT SECTION PNEUMATICALLY OPERATED DIAPHRAGM VALVE 2 INCH
CUT SECTION BALL VALVE 2 INCH
CUT SECTION BALL VALVE 2 INCH
CUT SECTION DIAPHRAGM VALVE 2 INCH
CUT SECTION DIAPHRAGM VALVE 2 INCH
CUT SECTION MODEL OF SCREW PUMP
CUT SECTION MODEL OF SCREW PUMP
VANE PUMP CUT SECTION SLIDING TYPE
VANE PUMP CUT SECTION SLIDING TYPE
CUT SECTION MODEL OF RECIPROCATING PUMP
CUT SECTION MODEL OF RECIPROCATING PUMP
CUT SECTION OF GEAR BOX PLANETARY BEVEL GEAR TYPE
CUT SECTION OF GEAR BOX PLANETARY BEVEL GEAR TYPE
CUT SECTION MODEL OF CENTRIFUGAL PUMP BACK PULLOUT TYPE
CUT SECTION MODEL OF CENTRIFUGAL PUMP BACK PULLOUT TYPE
SCRAPER FLAT 250MM HANDLED
SCRAPER FLAT 250MM HANDLED
Knife Electrician D.B.
Knife Electrician D.B.
Screw Driver Set set of 5 100 TO 300 mm
Screw Driver Set set of 5 100 TO 300 mm
Conduit pipe cutting and threading machines adjustable for 15 mm to 30 mm
Conduit pipe cutting and threading machines adjustable for 15 mm to 30 mm
Hot wire Ammeter 0 TO 15 Amps
Hot wire Ammeter 0 TO 15 Amps
Wheatstone Bridge
Wheatstone Bridge
Autotransformer 250V 10A
Autotransformer 250V 10A
Solid State Solar Based Single Phase Energy Meter Bidirectional 5 TO 30 Amps 240 Volts
Solid State Solar Based Single Phase Energy Meter Bidirectional 5 TO 30 Amps 240 Volts
Magnetic Flux Meter 0 TO 500 tesla
Magnetic Flux Meter 0 TO 500 tesla
Small crimping tools assorted 10 TO 100 mm 5 NOS
Small crimping tools assorted 10 TO 100 mm 5 NOS
Motion Detector
Motion Detector
Soft starter 1 ph
Soft starter 1 ph
Field regulator 0 - 1000 ohmic, 2 Amps
Field regulator 0 - 1000 ohmic, 2 Amps
DMX Controller
DMX Controller
Rewinding Machine
Rewinding Machine
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | HAMMER CROSS PEIN 220 GRAMS OR 250 GRAMS OR 0.5 LB WITH HANDLE | HAMMER CROSS PEIN 220 GRAMS OR 250 GRAMS OR 0.5 LB WITH HANDLE | 8 | nos | vasad_con | 15 | |
| 2 | CHISEL COLD FLAT 25 MM X 200 MM | CHISEL COLD FLAT 25 MM X 200 MM | 2 | nos | vasad_con | 15 | |
| 3 | ALLEN KEY SET - HEXAGONAL - 1 - 12 MM, SET OF 12 KEYS | ALLEN KEY SET - HEXAGONAL - 1 - 12 MM, SET OF 12 KEYS | 1 | set | vasad_con | 15 | |
| 4 | BRADAWL 150 MM X 6MM SQUARE POINTED | BRADAWL 150 MM X 6MM SQUARE POINTED | 1 | nos | vasad_con | 15 | |
| 5 | MALLET HARD WOOD 0.50 KG. | MALLET HARD WOOD 0.50 KG. | 6 | nos | vasad_con | 15 | |
| 6 | HACKSAW FRAME FIXED TYPE 150 MM | HACKSAW FRAME FIXED TYPE 150 MM | 1 | nos | vasad_con | 15 | |
| 7 | PLIER FLAT NOSE LENGTH 200 MM INSULATED | PLIER FLAT NOSE LENGTH 200 MM INSULATED | 4 | nos | vasad_con | 15 | |
| 8 | DRILL HAND BRACE 0 TO 100 MM | DRILL HAND BRACE 0 TO 100 MM | 8 | nos | vasad_con | 15 | |
| 9 | PLANE- JACK 200 MM X 50 MM | PLANE- JACK 200 MM X 50 MM | 2 | nos | vasad_con | 15 | |
| 10 | PLANE SMOOTHING, METAL 200 MM X 50 MM CUTTER | PLANE SMOOTHING, METAL 200 MM X 50 MM CUTTER | 2 | nos | vasad_con | 15 | |
| 11 | CUT OUT RELAYS | CUT OUT RELAYS | 2 | nos | vasad_con | 15 | |
| 12 | REVERSE CURRENT RELAYS | REVERSE CURRENT RELAYS | 2 | nos | vasad_con | 15 | |
| 13 | UNDER VOLTAGE RELAYS | UNDER VOLTAGE RELAYS | 2 | nos | vasad_con | 15 | |
| 14 | KNIFE SWITCH DPDT FITTED WITH FUSE TERMINALS 16 AMP | KNIFE SWITCH DPDT FITTED WITH FUSE TERMINALS 16 AMP | 4 | nos | vasad_con | 15 | |
| 15 | KNIFE SWITCH TPDT FITTED WITH FUSE TERMINALS16 AMP | KNIFE SWITCH TPDT FITTED WITH FUSE TERMINALS16 AMP | 4 | nos | vasad_con | 15 | |
| 16 | D.C. STARTERS-4-POINTS FOR 2.5 KW DC MOTOR | D.C. STARTERS-4-POINTS FOR 2.5 KW DC MOTOR | 1 | nos | vasad_con | 15 | |
| 17 | AC STARTER RESISTANCE TYPE STARTER | AC STARTER RESISTANCE TYPE STARTER | 1 | nos | vasad_con | 15 | |
| 18 | ELECTRIC IRON 1200 W, 230 V WITH TEMPRATURE CONTROL. | ELECTRIC IRON 1200 W, 230 V WITH TEMPRATURE CONTROL. | 2 | nos | vasad_con | 15 | |
| 19 | IMMERSION HEATER 1500 W -230 V | IMMERSION HEATER 1500 W -230 V | 3 | nos | vasad_con | 15 | |
| 20 | MIXTURE OR MIXER GRINDER 750 W, 240 V | MIXTURE OR MIXER GRINDER 750 W, 240 V | 3 | nos | vasad_con | 15 | |
| 21 | VOLTAGE STABILISER INPUT 150 TO 230 VOLT AC, OUTPUT 220 VOLT AC | VOLTAGE STABILISER INPUT 150 TO 230 VOLT AC, OUTPUT 220 VOLT AC | 1 | nos | vasad_con | 15 | |
| 22 | ANVIL 50 KGS | ANVIL 50 KGS | 1 | nos | vasad_con | 15 | |
| 23 | TONG FLAT.200 MM LONG | TONG FLAT.200 MM LONG | 6 | nos | vasad_con | 15 | |
| 24 | SIMPLE MACHINES SCREW JACK WITH ACCESSORIES | SIMPLE MACHINES SCREW JACK WITH ACCESSORIES | 1 | set | vasad_con | 15 | |
| 25 | THERMOCOUPLES J K R S B TYPE EACH | THERMOCOUPLES J K R S B TYPE EACH | 1 | set | vasad_con | 15 | |
| 26 | STEAM GENERATOR COPPER FOR STEAM DISTILATION. CAP 1000 ML | STEAM GENERATOR COPPER FOR STEAM DISTILATION. CAP 1000 ML | 2 | nos | vasad_con | 15 | |
| 27 | SEARLES APPARETUS FOR YOUNGS MODULUS | SEARLES APPARETUS FOR YOUNGS MODULUS | 3 | nos | vasad_con | 15 | |
| 28 | REDWOOD VISCOMETER | REDWOOD VISCOMETER | 1 | nos | vasad_con | 15 | |
| 29 | TEST TUBE HOLDERS | TEST TUBE HOLDERS | 6 | nos | vasad_con | 15 | |
| 30 | Caliper inside spring type. 150 mm | Caliper inside spring type. 150 mm | 17 | nos | vasad_con | 15 | |
| 31 | Caliper hermaphrodite spring type 150 mm | Caliper hermaphrodite spring type 150 mm | 31 | nos | vasad_con | 15 | |
| 32 | Scriber 150 mm | Scriber 150 mm | 19 | nos | vasad_con | 15 | |
| 33 | Dot punch 100 mm | Dot punch 100 mm | 18 | nos | vasad_con | 15 | |
| 34 | File knife edge smooth 150 mm | File knife edge smooth 150 mm | 4 | nos | vasad_con | 15 | |
| 35 | Machine Reamer parallel Helical flute 12 TO 16 mm set of 5 | Machine Reamer parallel Helical flute 12 TO 16 mm set of 5 | 1 | set | vasad_con | 15 | |
| 36 | Scraper half round 150 mm | Scraper half round 150 mm | 2 | nos | vasad_con | 15 | |
| 37 | Chisel cold crosscut AND diamond point 9 mm X 150 mm | Chisel cold crosscut AND diamond point 9 mm X 150 mm | 2 | set | vasad_con | 15 | |
| 38 | Chisel cold round nose 9 mm X 100 mm | Chisel cold round nose 9 mm X 100 mm | 4 | nos | vasad_con | 15 | |
| 39 | Fire buckets WITH STAND | Fire buckets WITH STAND | 3 | nos | vasad_con | 15 | |
| 40 | Power tools for fastening Capacity 10 TO 18mm | Power tools for fastening Capacity 10 TO 18mm | 1 | nos | vasad_con | 15 | |
| 41 | Pipe threading die with handle Ratchet type Die head of ONE BY TWO INCH, THREE BY FOUR INCH, ONE INCH COMPLETE SET | Pipe threading die with handle Ratchet type Die head of ONE BY TWO INCH, THREE BY FOUR INCH, ONE INCH COMPLETE SET | 2 | set | vasad_con | 15 | |
| 42 | Planishing hammer | Planishing hammer | 2 | nos | vasad_con | 15 | |
| 43 | Engineers try square knife edge 150 mm Blade | Engineers try square knife edge 150 mm Blade | 1 | nos | vasad_con | 15 | |
| 44 | CUT SECTION GATE VALVE 2 INCH | CUT SECTION GATE VALVE 2 INCH | 1 | nos | vasad_con | 15 | |
| 45 | CUT SECTION GLOBE VALVE 2 INCH | CUT SECTION GLOBE VALVE 2 INCH | 1 | nos | vasad_con | 15 | |
| 46 | CUT SECTION SAFETY VALVE 2 INCH | CUT SECTION SAFETY VALVE 2 INCH | 1 | nos | vasad_con | 15 | |
| 47 | CUT SECTION NEEDLE VALVE 25 MM CUT SECTION MADE UP S.S. OF 2 INCH | CUT SECTION NEEDLE VALVE 25 MM CUT SECTION MADE UP S.S. OF 2 INCH | 1 | nos | vasad_con | 15 | |
| 48 | CUT SECTION BUTTER FLY VALVE 2 INCH | CUT SECTION BUTTER FLY VALVE 2 INCH | 1 | nos | vasad_con | 15 | |
| 49 | CUT SECTION NON RETURN VALVE 2 INCH | CUT SECTION NON RETURN VALVE 2 INCH | 1 | nos | vasad_con | 15 | |
| 50 | CUT SECTION PNEUMATICALLY OPERATED DIAPHRAGM VALVE 2 INCH | CUT SECTION PNEUMATICALLY OPERATED DIAPHRAGM VALVE 2 INCH | 1 | nos | vasad_con | 15 | |
| 51 | CUT SECTION BALL VALVE 2 INCH | CUT SECTION BALL VALVE 2 INCH | 1 | nos | vasad_con | 15 | |
| 52 | CUT SECTION DIAPHRAGM VALVE 2 INCH | CUT SECTION DIAPHRAGM VALVE 2 INCH | 1 | nos | vasad_con | 15 | |
| 53 | CUT SECTION MODEL OF SCREW PUMP | CUT SECTION MODEL OF SCREW PUMP | 1 | nos | vasad_con | 15 | |
| 54 | VANE PUMP CUT SECTION SLIDING TYPE | VANE PUMP CUT SECTION SLIDING TYPE | 1 | nos | vasad_con | 15 | |
| 55 | CUT SECTION MODEL OF RECIPROCATING PUMP | CUT SECTION MODEL OF RECIPROCATING PUMP | 1 | nos | vasad_con | 15 | |
| 56 | CUT SECTION OF GEAR BOX PLANETARY BEVEL GEAR TYPE | CUT SECTION OF GEAR BOX PLANETARY BEVEL GEAR TYPE | 1 | nos | vasad_con | 15 | |
| 57 | CUT SECTION MODEL OF CENTRIFUGAL PUMP BACK PULLOUT TYPE | CUT SECTION MODEL OF CENTRIFUGAL PUMP BACK PULLOUT TYPE | 1 | nos | vasad_con | 15 | |
| 58 | SCRAPER FLAT 250MM HANDLED | SCRAPER FLAT 250MM HANDLED | 2 | nos | vasad_con | 15 | |
| 59 | Knife Electrician D.B. | Knife Electrician D.B. | 27 | nos | vasad_con | 15 | |
| 60 | Screw Driver Set set of 5 100 TO 300 mm | Screw Driver Set set of 5 100 TO 300 mm | 38 | set | vasad_con | 15 | |
| 61 | Conduit pipe cutting and threading machines adjustable for 15 mm to 30 mm | Conduit pipe cutting and threading machines adjustable for 15 mm to 30 mm | 1 | set | vasad_con | 15 | |
| 62 | Hot wire Ammeter 0 TO 15 Amps | Hot wire Ammeter 0 TO 15 Amps | 1 | nos | vasad_con | 15 | |
| 63 | Wheatstone Bridge | Wheatstone Bridge | 1 | nos | vasad_con | 15 | |
| 64 | Autotransformer 250V 10A | Autotransformer 250V 10A | 2 | nos | vasad_con | 15 | |
| 65 | Solid State Solar Based Single Phase Energy Meter Bidirectional 5 TO 30 Amps 240 Volts | Solid State Solar Based Single Phase Energy Meter Bidirectional 5 TO 30 Amps 240 Volts | 1 | nos | vasad_con | 15 | |
| 66 | Magnetic Flux Meter 0 TO 500 tesla | Magnetic Flux Meter 0 TO 500 tesla | 1 | nos | vasad_con | 15 | |
| 67 | Small crimping tools assorted 10 TO 100 mm 5 NOS | Small crimping tools assorted 10 TO 100 mm 5 NOS | 1 | set | vasad_con | 15 | |
| 68 | Motion Detector | Motion Detector | 5 | nos | vasad_con | 15 | |
| 69 | Soft starter 1 ph | Soft starter 1 ph | 1 | nos | vasad_con | 15 | |
| 70 | Field regulator 0 - 1000 ohmic, 2 Amps | Field regulator 0 - 1000 ohmic, 2 Amps | 1 | nos | vasad_con | 15 | |
| 71 | DMX Controller | DMX Controller | 1 | nos | vasad_con | 15 | |
| 72 | Rewinding Machine | Rewinding Machine | 1 | nos | vasad_con | 15 |
Categories
127
Required Documents
GST registration certificate
PAN card
Audited financial statements or CA certificate indicating turnover for last 3 years
EMD submission proof (DD) and scanned copy uploaded with bid; hardcopy to be delivered within 5 days
Technical bid documents and OEM authorizations (where applicable)
Experience certificates for similar tool supply projects
Declaration of financial standing (no liquidation/recovery proceedings)
GST and payment terms acknowledgment and Gujarat State Procurement Policy compliance
Frequently Asked Questions
Key insights about GUJARAT tender market
How to bid for tool procurement tender in Anand Gujarat 2026
Bidders must submit GST registration, PAN, audited turnover evidence for the last 3 years, EMD via Demand Draft payable to Principal Industrial Training Institute Vasad, Anand, and OEM authorizations if applicable. Attach technical bids, experience certificates, and ensure compliance with Gujarat State Procurement Policy 2024.
What documents are required for tool kit tender in Gujarat
Required documents include GST certificate, PAN, audited financials or CA certificate showing turnover, EMD proof, bid submission copy, technical bids, OEM authorizations, and experience certificates for similar tool supply projects. Upload these with the bid and deliver a hard copy within 5 days.
What are the key technical specifications for hammer and chisel items
Key specs include HAMMER CROSS PEIN 220/250 g or 0.5 lb, CHISEL FLAT 25 mm x 200 mm, and SET OF 12 HEX KEYS (1-12 mm). Ensure tool dimensions and weight meet these listed values and arrive in workshop-ready packaging.
When is the delivery deadline for tool kit items in Anand
Delivery timelines align with original delivery order; extension provisions allow for up to extended period if quantity increases. Additional time is calculated as (increased quantity/original quantity) × original delivery period, with a minimum of 30 days.
What are the EMD requirements for Gujarat tool procurement
EMD must be submitted as a Demand Draft payable to the Principal Industrial Training Institute Vasad, Anand. A scanned copy must be uploaded with the bid, and the hardcopy must reach the buyer within 5 days of bid end date.
What standards or policy govern this tool procurement in Gujarat
The bid is governed by the Gujarat State Procurement Policy, 2024. Compliance includes terms on delivery, turnover, and EMD; GST handling is bidder’s responsibility with reimbursement as per actuals or applicable rates.
How to verify bidder eligibility for tool kit supply in Anand
Verify turnover (last 3 years), absence of liquidation or receivership, GST status, and possession of required experience certificates for similar tool supply contracts. Ensure OEM authorizations if required and compliance with ATC terms.
What items are included in the 72-item tool BOQ in Anand
The BOQ covers a broad set of mechanical hand tools, electrical components, and lab equipment, including hammers, chisels, hex keys, mallets, pliers, braces, planes, electrical starters, relays, switches, meters, valves, pumps, and assorted measuring tools.