Contract Bidding Open For DIAL GAUGE TYPE 1 GR. A COMPLETE WITH CLAMPING DEVICES AND MAGNETIC STAND,DRILL POINT ANGLE GAUGE,I in BHAVNAGAR, GUJARAT
Progress
A tender has been published for Directorate Of Employment & Training DIAL GAUGE TYPE 1 GR. A COMPLETE WITH CLAMPING DEVICES AND MAGNETIC STAND, DRILL POINT ANGLE GAUGE, INJECTOR TESTING SET HAND TESTER, OIL STONE CARBORUNDUM UNIVERSEL SILICON CARBIDE COMBINATION ROUGH AND FINE 150 X 50 X 25 MM, UNIVERSAL SCRIBING BLOCK 12 INCHES OR 30 CM WITH SCRIBER, TURBOCHARGER CUT SECTIONAL VIEW LATEST WGT TYPE, VERNIER BEVEL PROTRACTOR BLADE WITH ACUTE ANGLE ATTACHMENT 300 MM, V-BLOCKS PAIR WITH CLAMPS 150 X 100 X 100 MM. , MORSE TAPER SLEEVES DRILL NO. 0-1, 1-2, 2-3, 3-4, 4-5, , POWER TOOL FOR FASTENING CAPACITY 10 TO 18MM, DEFFERENT PROFILE GAUGES PLATE TYPE FOR DEMONSTRATION METRIC STANDARD, KNURLING TOOL DIAMOND, DRILLS GUAGE LETTER SIZES A TO Z, JIGS AND FIXTURE SAMPLE FOR DEMONSTRATION, TELESCOPIC GAUGE RANGE 8-150 MM SET OF 6 PCS, DIAL TEST INDICATOR ON STAND 0. 01 MM LEAST COUNT, SINE BAR 125 MM. , SURFACE ROUGHNESS COMPARISON PLATES N1-N12 GRADES, VERNIER BEVEL PROTECTOR RANGE 360DEG, LC 5MIN 150MM BLADE, LATHE TOOLS BIT 6 MM X 75 MM HSS, LATHE TOOLS BIT 8 MM X 75 MM HSS, LATHE TOOLS BIT 10 MM X 75 MM HSS, ARM STRONG TYPE TOOL BIT HOLDER RIGHT HAND, ARM STRONG TYPE TOOL BIT HOLDER LEFT HAND, UNIVERSAL WELD MEASURING GAUGE, H. P. WELDING TORCH WITH 5 NOZZLES, CO2 GAS PRESSURE REGULATOR WITH FLOW METER, MULTIANGLE MAGNETIC CLAMP SET METAL BASE 18X10X10CM, ANVIL 24 SQUARE INCHES WORKING AREA WITH STAND, FIRE BUCKETS WITH STAND, PORTABLE ABRASIVE CUT-OFF MACHINE in BHAVNAGAR, GUJARAT. Quantity: 47 by. Submission Deadline: 28-10-2026 12: 00: 00. Check eligibility and apply.
Tender Data
Bid Details
Quantity
47
Category
ANVIL 24 SQUARE INCHES WORKING AREA WITH STAND
Bid Type
Two Packet Bid
Bid Validity
180 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
No
MII Purchase Preference
Yes
MII Preference Band
L1+20%
MSE Purchase Preference
Yes
MSE Preference Band
L1+20%
MSE Exemption/Relaxation
No
Startup Exemption/Relaxation
Yes
Bid Splitting Applied
No
Requirements
Past Performance
10 %
Warranty Period
15 days
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
DIAL GAUGE TYPE 1 GR. A COMPLETE WITH CLAMPING DEVICES AND MAGNETIC STAND , DRILL POINT ANGLE GAUGE , INJECTOR TESTING SET HAND TESTER , OIL STONE CARBORUNDUM UNIVERSEL SILICON CARBIDE COMBINATION ROUGH AND FINE 150 X 50 X 25 MM , UNIVERSAL SCRIBING BLOCK 12 INCHES OR 30 CM WITH SCRIBER , TURBOCHARGER CUT SECTIONAL VIEW LATEST WGT TYPE , VERNIER BEVEL PROTRACTOR BLADE WITH ACUTE ANGLE ATTACHMENT 300 MM , V-BLOCKS PAIR WITH CLAMPS 150 X 100 X 100 MM. , MORSE TAPER SLEEVES DRILL NO. 0-1, 1-2, 2-3, 3-4, 4-5, , POWER TOOL FOR FASTENING CAPACITY 10 TO 18MM , DEFFERENT PROFILE GAUGES PLATE TYPE FOR DEMONSTRATION METRIC STANDARD , KNURLING TOOL DIAMOND , DRILLS GUAGE LETTER SIZES A TO Z , JIGS AND FIXTURE SAMPLE FOR DEMONSTRATION , TELESCOPIC GAUGE RANGE 8-150 MM SET OF 6 PCS , DIAL TEST INDICATOR ON STAND 0.01 MM LEAST COUNT , SINE BAR 125 MM. , SURFACE ROUGHNESS COMPARISON PLATES N1-N12 GRADES , VERNIER BEVEL PROTECTOR RANGE 360DEG, LC 5MIN 150MM BLADE , LATHE TOOLS BIT 6 MM X 75 MM HSS , LATHE TOOLS BIT 8 MM X 75 MM HSS , LATHE TOOLS BIT 10 MM X 75 MM HSS , ARM STRONG TYPE TOOL BIT HOLDER RIGHT HAND , ARM STRONG TYPE TOOL BIT HOLDER LEFT HAND , UNIVERSAL WELD MEASURING GAUGE , H.P. WELDING TORCH WITH 5 NOZZLES , CO2 GAS PRESSURE REGULATOR WITH FLOW METER , MULTIANGLE MAGNETIC CLAMP SET METAL BASE 18X10X10CM , ANVIL 24 SQUARE INCHES WORKING AREA WITH STAND , FIRE BUCKETS WITH STAND , PORTABLE ABRASIVE CUT-OFF MACHINE
Advisory Bank
State Bank of India
ePBG Percentage
5%
ePBG Duration (Months)
12
Payment Timelines
Payments shall be made to the Seller within 45 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Pre-Bid & Qualification
Pre-Bid Date
14-10-2026 11:00:00
Pre-Bid Venue
PRINCIPAL OFFICE I.T.I. JESAR
Delivery Details
Max Delivery Days
20
Delivery Locations
1
Delivery Cities
Bhavnagar
Delivery Pincodes
364510
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Dhameliya Jatinkumar Ashokbhai | 364510,GOVT. INDUSTRIAL TRAINING INSTITUTE, JESAR, NEAR SURNALA SLOPE MAHUVA ROAD TA: JESAR DI - BHAVNAGAR | Bhavnagar | Gujarat | 364510 | 2 | 20 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-9981118.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Other Documents
OTHER
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
31 Items Sign in to view GEM price trends Sign in for GEM prices
DIAL GAUGE TYPE 1 GR. A COMPLETE WITH CLAMPING DEVICES AND MAGNETIC STAND
DIAL GAUGE TYPE 1 GR. A COMPLETE WITH CLAMPING DEVICES AND MAGNETIC STAND
DRILL POINT ANGLE GAUGE
DRILL POINT ANGLE GAUGE
INJECTOR TESTING SET HAND TESTER
INJECTOR TESTING SET HAND TESTER
OIL STONE CARBORUNDUM UNIVERSEL SILICON CARBIDE COMBINATION ROUGH AND FINE 150 X 50 X 25 MM
OIL STONE CARBORUNDUM UNIVERSEL SILICON CARBIDE COMBINATION ROUGH AND FINE 150 X 50 X 25 MM
UNIVERSAL SCRIBING BLOCK 12 INCHES OR 30 CM WITH SCRIBER
UNIVERSAL SCRIBING BLOCK 12 INCHES OR 30 CM WITH SCRIBER
TURBOCHARGER CUT SECTIONAL VIEW LATEST WGT TYPE
TURBOCHARGER CUT SECTIONAL VIEW LATEST WGT TYPE
VERNIER BEVEL PROTRACTOR BLADE WITH ACUTE ANGLE ATTACHMENT 300 MM
VERNIER BEVEL PROTRACTOR BLADE WITH ACUTE ANGLE ATTACHMENT 300 MM
V-BLOCKS PAIR WITH CLAMPS 150 X 100 X 100 MM.
V-BLOCKS PAIR WITH CLAMPS 150 X 100 X 100 MM.
MORSE TAPER SLEEVES DRILL NO. 0-1, 1-2, 2-3, 3-4, 4-5,
MORSE TAPER SLEEVES DRILL NO. 0-1, 1-2, 2-3, 3-4, 4-5,
POWER TOOL FOR FASTENING CAPACITY 10 TO 18MM
POWER TOOL FOR FASTENING CAPACITY 10 TO 18MM
DEFFERENT PROFILE GAUGES PLATE TYPE FOR DEMONSTRATION METRIC STANDARD
DEFFERENT PROFILE GAUGES PLATE TYPE FOR DEMONSTRATION METRIC STANDARD
KNURLING TOOL DIAMOND
KNURLING TOOL DIAMOND
DRILLS GUAGE LETTER SIZES A TO Z
DRILLS GUAGE LETTER SIZES A TO Z
JIGS AND FIXTURE SAMPLE FOR DEMONSTRATION
JIGS AND FIXTURE SAMPLE FOR DEMONSTRATION
TELESCOPIC GAUGE RANGE 8-150 MM SET OF 6 PCS
TELESCOPIC GAUGE RANGE 8-150 MM SET OF 6 PCS
DIAL TEST INDICATOR ON STAND 0.01 MM LEAST COUNT
DIAL TEST INDICATOR ON STAND 0.01 MM LEAST COUNT
SINE BAR 125 MM.
SINE BAR 125 MM.
SURFACE ROUGHNESS COMPARISON PLATES N1-N12 GRADES
SURFACE ROUGHNESS COMPARISON PLATES N1-N12 GRADES
VERNIER BEVEL PROTECTOR RANGE 360DEG, LC 5MIN 150MM BLADE
VERNIER BEVEL PROTECTOR RANGE 360DEG, LC 5MIN 150MM BLADE
LATHE TOOLS BIT 6 MM X 75 MM HSS
LATHE TOOLS BIT 6 MM X 75 MM HSS
LATHE TOOLS BIT 8 MM X 75 MM HSS
LATHE TOOLS BIT 8 MM X 75 MM HSS
LATHE TOOLS BIT 10 MM X 75 MM HSS
LATHE TOOLS BIT 10 MM X 75 MM HSS
ARM STRONG TYPE TOOL BIT HOLDER RIGHT HAND
ARM STRONG TYPE TOOL BIT HOLDER RIGHT HAND
ARM STRONG TYPE TOOL BIT HOLDER LEFT HAND
ARM STRONG TYPE TOOL BIT HOLDER LEFT HAND
UNIVERSAL WELD MEASURING GAUGE
UNIVERSAL WELD MEASURING GAUGE
H.P. WELDING TORCH WITH 5 NOZZLES
H.P. WELDING TORCH WITH 5 NOZZLES
CO2 GAS PRESSURE REGULATOR WITH FLOW METER
CO2 GAS PRESSURE REGULATOR WITH FLOW METER
MULTIANGLE MAGNETIC CLAMP SET METAL BASE 18X10X10CM
MULTIANGLE MAGNETIC CLAMP SET METAL BASE 18X10X10CM
ANVIL 24 SQUARE INCHES WORKING AREA WITH STAND
ANVIL 24 SQUARE INCHES WORKING AREA WITH STAND
FIRE BUCKETS WITH STAND
FIRE BUCKETS WITH STAND
PORTABLE ABRASIVE CUT-OFF MACHINE
PORTABLE ABRASIVE CUT-OFF MACHINE
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | DIAL GAUGE TYPE 1 GR. A COMPLETE WITH CLAMPING DEVICES AND MAGNETIC STAND | DIAL GAUGE TYPE 1 GR. A COMPLETE WITH CLAMPING DEVICES AND MAGNETIC STAND | 2 | set | jesar_con | 20 | |
| 2 | DRILL POINT ANGLE GAUGE | DRILL POINT ANGLE GAUGE | 1 | no | jesar_con | 20 | |
| 3 | INJECTOR TESTING SET HAND TESTER | INJECTOR TESTING SET HAND TESTER | 1 | set | jesar_con | 20 | |
| 4 | OIL STONE CARBORUNDUM UNIVERSEL SILICON CARBIDE COMBINATION ROUGH AND FINE 150 X 50 X 25 MM | OIL STONE CARBORUNDUM UNIVERSEL SILICON CARBIDE COMBINATION ROUGH AND FINE 150 X 50 X 25 MM | 1 | no | jesar_con | 20 | |
| 5 | UNIVERSAL SCRIBING BLOCK 12 INCHES OR 30 CM WITH SCRIBER | UNIVERSAL SCRIBING BLOCK 12 INCHES OR 30 CM WITH SCRIBER | 1 | set | jesar_con | 20 | |
| 6 | TURBOCHARGER CUT SECTIONAL VIEW LATEST WGT TYPE | TURBOCHARGER CUT SECTIONAL VIEW LATEST WGT TYPE | 1 | no | jesar_con | 20 | |
| 7 | VERNIER BEVEL PROTRACTOR BLADE WITH ACUTE ANGLE ATTACHMENT 300 MM | VERNIER BEVEL PROTRACTOR BLADE WITH ACUTE ANGLE ATTACHMENT 300 MM | 1 | set | jesar_con | 20 | |
| 8 | V-BLOCKS PAIR WITH CLAMPS 150 X 100 X 100 MM. | V-BLOCKS PAIR WITH CLAMPS 150 X 100 X 100 MM. | 2 | set | jesar_con | 20 | |
| 9 | MORSE TAPER SLEEVES DRILL NO. 0-1, 1-2, 2-3, 3-4, 4-5, | MORSE TAPER SLEEVES DRILL NO. 0-1, 1-2, 2-3, 3-4, 4-5, | 1 | set | jesar_con | 20 | |
| 10 | POWER TOOL FOR FASTENING CAPACITY 10 TO 18MM | POWER TOOL FOR FASTENING CAPACITY 10 TO 18MM | 1 | no | jesar_con | 20 | |
| 11 | DEFFERENT PROFILE GAUGES PLATE TYPE FOR DEMONSTRATION METRIC STANDARD | DEFFERENT PROFILE GAUGES PLATE TYPE FOR DEMONSTRATION METRIC STANDARD | 4 | set | jesar_con | 20 | |
| 12 | KNURLING TOOL DIAMOND | KNURLING TOOL DIAMOND | 1 | no | jesar_con | 20 | |
| 13 | DRILLS GUAGE LETTER SIZES A TO Z | DRILLS GUAGE LETTER SIZES A TO Z | 2 | nos | jesar_con | 20 | |
| 14 | JIGS AND FIXTURE SAMPLE FOR DEMONSTRATION | JIGS AND FIXTURE SAMPLE FOR DEMONSTRATION | 1 | set | jesar_con | 20 | |
| 15 | TELESCOPIC GAUGE RANGE 8-150 MM SET OF 6 PCS | TELESCOPIC GAUGE RANGE 8-150 MM SET OF 6 PCS | 1 | set | jesar_con | 20 | |
| 16 | DIAL TEST INDICATOR ON STAND 0.01 MM LEAST COUNT | DIAL TEST INDICATOR ON STAND 0.01 MM LEAST COUNT | 1 | set | jesar_con | 20 | |
| 17 | SINE BAR 125 MM. | SINE BAR 125 MM. | 1 | no | jesar_con | 20 | |
| 18 | SURFACE ROUGHNESS COMPARISON PLATES N1-N12 GRADES | SURFACE ROUGHNESS COMPARISON PLATES N1-N12 GRADES | 1 | set | jesar_con | 20 | |
| 19 | VERNIER BEVEL PROTECTOR RANGE 360DEG, LC 5MIN 150MM BLADE | VERNIER BEVEL PROTECTOR RANGE 360DEG, LC 5MIN 150MM BLADE | 1 | no | jesar_con | 20 | |
| 20 | LATHE TOOLS BIT 6 MM X 75 MM HSS | LATHE TOOLS BIT 6 MM X 75 MM HSS | 2 | nos | jesar_con | 20 | |
| 21 | LATHE TOOLS BIT 8 MM X 75 MM HSS | LATHE TOOLS BIT 8 MM X 75 MM HSS | 2 | nos | jesar_con | 20 | |
| 22 | LATHE TOOLS BIT 10 MM X 75 MM HSS | LATHE TOOLS BIT 10 MM X 75 MM HSS | 2 | nos | jesar_con | 20 | |
| 23 | ARM STRONG TYPE TOOL BIT HOLDER RIGHT HAND | ARM STRONG TYPE TOOL BIT HOLDER RIGHT HAND | 2 | nos | jesar_con | 20 | |
| 24 | ARM STRONG TYPE TOOL BIT HOLDER LEFT HAND | ARM STRONG TYPE TOOL BIT HOLDER LEFT HAND | 2 | nos | jesar_con | 20 | |
| 25 | UNIVERSAL WELD MEASURING GAUGE | UNIVERSAL WELD MEASURING GAUGE | 1 | no | jesar_con | 20 | |
| 26 | H.P. WELDING TORCH WITH 5 NOZZLES | H.P. WELDING TORCH WITH 5 NOZZLES | 2 | set | jesar_con | 20 | |
| 27 | CO2 GAS PRESSURE REGULATOR WITH FLOW METER | CO2 GAS PRESSURE REGULATOR WITH FLOW METER | 2 | nos | jesar_con | 20 | |
| 28 | MULTIANGLE MAGNETIC CLAMP SET METAL BASE 18X10X10CM | MULTIANGLE MAGNETIC CLAMP SET METAL BASE 18X10X10CM | 1 | set | jesar_con | 20 | |
| 29 | ANVIL 24 SQUARE INCHES WORKING AREA WITH STAND | ANVIL 24 SQUARE INCHES WORKING AREA WITH STAND | 1 | no | jesar_con | 20 | |
| 30 | FIRE BUCKETS WITH STAND | FIRE BUCKETS WITH STAND | 4 | set | jesar_con | 20 | |
| 31 | PORTABLE ABRASIVE CUT-OFF MACHINE | PORTABLE ABRASIVE CUT-OFF MACHINE | 1 | no | jesar_con | 20 |
Categories
71
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender