GEM

Government Tender Published for Distribution Transformer, 3 Phase, 11 kV > 200 KVA up to and Including 2500 KVA,Distribution Transf in CHANDRAPUR, MAHARASHTRA

Bid Publish Date

16-Jan-2026, 10:35 am

Bid End Date

06-Feb-2026, 11:00 am

EMD

₹43,000

Value

₹70,20,205

Location

CHANDRAPUR , MAHARASHTRA

Progress

Issue16-Jan-2026, 10:35 am

AwardPending

Explore all 4 tabs to view complete tender details

Quantity

Past Similar Tenders (Historical Results)

5 found

Indian Army High Pot Machines Tender 2025 Department Of Military Affairs 230V IS 550 50 Hz

Indian Army

WEST DELHI, DELHI

Posted: 30 December 2025

Closed: 9 January 2026

GEM

Indian Army XLPE Cable & LED Lighting Tender 2025 Ahmedabad Gujarat IS 7098 IS 694 MCCB

Indian Army

WEST DELHI, DELHI

Posted: 27 December 2025

Closed: 6 January 2026

GEM

Distribution Transformer, 3 Phase, 11 kV > 200 KVA up to and Including 2500 KVA

Controller General Of Patents Designs And Trade Marks (cgpdtm)

AHMEDABAD, GUJARAT

Posted: 9 December 2025

Closed: 19 December 2025

GEM

Indian Army XLPE Cables & Transformer Accessories Tender Solan Himachal Pradesh 2025 IS 7098 Part 1/2 BIS Licenses

Indian Army

SOLAN, HIMACHAL PRADESH

Posted: 4 December 2025

Closed: 15 December 2025

GEM

Indian Council Of Agricultural Research transformer procurement 3-Phase 11 kV 200-2500 kVA Dare Rajasthan 2025

Indian Council Of Agricultural Research (icar)

TONK, RAJASTHAN

Posted: 28 November 2025

Closed: 15 December 2025

GEM

Technical Specifications 3 Items

Item #1 Details

View Catalog

Category	Specification	Requirement
STANDARDS	Energy efficiency level	1, 2, 3
STANDARDS	BEE Star Rating	1, 2, 3, 4, 5
STANDARDS	Installation, Testing and Demonstration	Yes . Including Civil work, Yes . Excluding Civil work, No
STANDARDS	Minimum warranty on receipt of stores (in Months)	30, 42, 54, 66, 78
STANDARDS	Minimum warranty from the date of installation (in Months)	24, 36, 48, 60, 72
RATINGS	Nominal system voltage, HV ( in kV)	11
RATINGS	Nominal system voltage, LV ( in V)	415
RATINGS	Standard ratings (in kVA)	630
RATINGS	Minimum basic insulation level (in kVP)	75
RATINGS	No load voltage ratios (in Volts)	11000/433-250
RATINGS	Highest system voltage for equipment (in kV)	12
RATINGS	Rated lightning impulse withstand voltage (in kV Peak) (Refer IS:1180 (Part 1):2014 Annex-D)	60, 75, 95
CONSTRUCTION	Core mateial	CRGO (as per IS:3024 latest), Amorphous Core material (as per IS:16585 latest )
CONSTRUCTION	Conductor (Winding) material	Aluminium, Copper
CONSTRUCTION	Type of Mounting	Pole Mounted, Ground Mounted
CONSTRUCTION	Noise level at rated voltage and freqeuncy, Maximum (in dB)	45, 48, 51, 55
TRANSFORMER TANK	Transformer tank cover construction	Non-sealed, Bolted, Non-sealed, Clamped, Non-sealed, Welded, Sealed
TRANSFORMER TANK	Tank configuration with	With radiator fins, With out radiator fins, Cooliong tubes, Corrugated panels, Min. 1 mm thick
TRANSFORMER TANK	Material of transformer tank	Stainless steel, Mild Steel
TRANSFORMER TANK	Minimum thickness of top and bottom material of transformer tank (in mm)	5, 6, 7, 8, 9, 10
TRANSFORMER TANK	Minimum thickness of side material of transformer tank (in mm)	3.15, 4, 4.5, 5, 6
TRANSFORMER TANK	Material of Bolts/Nuts/Wahers exposed to atmosphere	Stainless steel (for upto 12 mm size), Brass (for upto 12 mm size), Electro Galvanized (for above 12 mm size), Hot Dip Galvanized (for above 12 mm size)
TRANSFORMER TANK	Gaskets wherever used shall conform to	Type III (as per IS:11149) Type C (as per IS:4253 (Pt.2), Type IV (as per IS:11149) NBR
TRANSFORMER TANK	Provision of conservator	Yes , for Non sealed type with Plain tank construction, No
Painting	Type of painting on inside of tank (hint: Refer Table 12 of IS:1180 (Pt.1):2014)	Varnish, Oil resistant paint
Painting	Type of painting on External surface of tank (hint: Refer Table 12 of IS:1180 (Pt.1):2014)	Epoxy (Primer), Polyurethane (finish coat)
TAP CHANGER	Winding tapped	HV
TAP CHANGER	No. of positions (in Nos.)	7
TAP CHANGER	Voltage variation	+5% to -10% in steps of 2.5% for variation of HV, +5% to -15% in steps of 2.5% for variation of HV
TERMINAL ARRANGEMENT	Transformer fitted with bushings of appropriate voltage and curent ratings on HV side	Yes. 3 Nos. (Conforming to IS:2099)
TERMINAL ARRANGEMENT	Transformer fitted with bushings of appropriate voltage and curent ratings on LV side	Yes. 4 Nos. (Conforming to IS:7421)
TERMINAL ARRANGEMENT	Suitable provision for adoption of cables of suitable size on LV side	Yes. For PVC/XLPE Cables, No
TERMINAL ARRANGEMENT	Cable End Box on HV side	Yes, No
TERMINAL ARRANGEMENT	Cable End Box on LV side	Yes, No
MARKING	Material of rating plate	Anodized aluminium, Stainless steel
MARKING	Marking method on rating plate	Etching, Engraved, Stamped
MARKING	Rating and terminal marking plates combined into one plate	Yes, No
OPTIONAL FITTINGS	Suitable rating lightning arrestors	HT Side, 1 No. per phase, No
OPTIONAL FITTINGS	Bird guard	Yes, No
OPTIONAL FITTINGS	Terminal connectors	Yes, No
OPTIONAL FITTINGS	Oil temperature indicator and widning temperature indicator	Yes, No
OPTIONAL FITTINGS	Jacking pads	Yes for transformer above 1600 KVA, No, Yes
OPTIONAL FITTINGS	Buchholz relay	Yes, NoMagnetic oil level gauge with low oil level alarm contact
OPTIONAL FITTINGS	Magnetic oil level gauge with low oil level alarm contact	Yes for transformer above 1600, No, Yes
OPTIONAL FITTINGS	Non return valve	Yes, No
OPTIONAL FITTINGS	Protection relay for sealed type transformers for internal parameters that is pressure, temperature, oil level and gas detection	Yes, No
OPTIONAL FITTINGS	Unidirectional flat rollers	Yes, No
OPTIONAL FITTINGS	Drain cum sampling valve	Yes with steel plug (for transformers upto 500 KVA), No, Yes
OPTIONAL FITTINGS	Self protection / disconnection devices	On secondary side (as per IS/IEC:60947-2:2003, No
OPTIONAL FITTINGS	Expulsion fuse as disconnection device	On Primay side (as per IS:9385 (Part 2):1980, No
SERVICE CONDITION	Maximum altitude	<1000 m, <5000 m
TEST REPORTS & CERTIFICATIONS	Availability of type test reports to prove the confirmity of the specification from	Central Govt. Lab (Govt. Of India), NABL Accrediated, ILAC accrediated
TEST REPORTS & CERTIFICATIONS	Agreed for stage Inspection as required by buyer	Yes
SPECIAL TEST REPORTS	Availability of test report for Determination of sound level test	Yes, No
SPECIAL TEST REPORTS	Availability of test report for short circuit withstand test	Yes, No
SPECIAL TEST REPORTS	Availability of test report for No load current at 112.5 % Voltage	Yes, No
SPECIAL TEST REPORTS	Availability of test report for Paint adhesion test	Yes for 1 No., No, Yes for all units
SPECIAL TEST REPORTS	BDV and moisture content of oil in the transformer	Yes for 1 No., No, Yes for all units
SPECIAL TEST REPORTS	Other requirements	Losses and Impedance values as per Cl.7.8 and Table 6 of IS:1180 (Part 1):2014 latest, Limits of temeprature-rise as per Cl.7.10 of IS:1180 (Part 1):2014 latest

Item #2 Details

View Catalog

Category	Specification	Requirement
STANDARDS	Energy efficiency level	1, 2, 3
STANDARDS	BEE Star Rating	1, 2, 3, 4, 5
STANDARDS	Installation, Testing and Demonstration	Yes . Including Civil work, Yes . Excluding Civil work, No
STANDARDS	Minimum warranty (in Months) on receipt of stores, irrespective of the date of installation	30, 42, 54, 66, 78, 60, 36 Or higher
STANDARDS	Minimum warranty (in Months) from the date of installation (Note: If "0" is selected, "Minimum warranty (in Months) on receipt of stores" shall still be applicable irrespective of the date of installation	24, 36, 48, 60, 72, 0
RATINGS	Nominal system voltage, HV ( in kV)	3.3, 6.6, 11, 22, 33
RATINGS	Nominal system voltage, LV ( in V)	433
RATINGS	Standard ratings (in kVA)	160
RATINGS	Minimum basic insulation level (in kVP)	40, 60, 75, 125, 170
RATINGS	No load voltage ratios (in Volts)	3300/433-250, 6600/433-250, 11000/433-250, 22000/433-250, 33000/433-250, 3300/250 (mid-point earth type), 6600/250 (mid-point earth type)
RATINGS	Highest system voltage for equipment (in kV)	3.6, 7.2, 12, 17.5, 24, 36
RATINGS	Rated lightning impulse withstand voltage (in kV Peak) (Refer IS:1180 (Part 1):2014 Annex-D)	20, 40, 60, 85, 95, 125, 145, 170, 75
CONSTRUCTION	Core mateial	CRGO (as per IS:3024 latest), Amorphous Core material (as per IS:16585 latest )
CONSTRUCTION	Conductor (Winding) material	Aluminium, Copper
CONSTRUCTION	Type of Mounting	Pole Mounted, Ground Mounted
CONSTRUCTION	Method of system earthing	effectively earthed system, solidly earthed
CONSTRUCTION	Noise level at rated voltage and freqeuncy, Maximum (in dB)	45, 48, 51, 55
TRANSFORMER TANK	Transformer tank cover construction	Non-sealed, Bolted, Non-sealed, Clamped, Non-sealed, Welded, Sealed
TRANSFORMER TANK	Tank configuration with	With radiator fins, With out radiator fins, Cooling tubes, Corrugated panels, Min. 1 mm thick
TRANSFORMER TANK	Material of transformer tank	Stainless steel, Mild Steel
TRANSFORMER TANK	Minimum thickness of top and bottom material of transformer tank (in mm)	5, 6, 7, 8, 9, 10
TRANSFORMER TANK	Minimum thickness of side material of transformer tank (in mm)	3.15, 4, 4.5, 5, 6
TRANSFORMER TANK	Material of Bolts/Nuts/Wahers exposed to atmosphere	Stainless steel (for upto 12 mm size), Brass (for upto 12 mm size), Electro Galvanized (for above 12 mm size), Hot Dip Galvanized (for above 12 mm size)
TRANSFORMER TANK	Gaskets wherever used shall conform to	Type III (as per IS:11149) Type C (as per IS:4253 (Pt.2)
TRANSFORMER TANK	Provision of conservator	Yes , for Non sealed type with Plain tank construction, No
PAINTING	Type of painting on inside of tank (hint: Refer Table 12 of IS:1180 (Pt.1):2014)	Varnish, Oil resistant paint, Hot oil resistant paint
PAINTING	Type of painting on External surface of tank	Epoxy (Primer), Polyurethane (finish coat)
TAP CHANGER	Tap changing arrangement	On load, Off circuit , through link, Off circuit , externally operated switch with mechanical locking device and a position indicator, Off circuit, arrangement of locking at any tap position, Not applicable
TAP CHANGER	Winding tapped	HV, Not applicable
TAP CHANGER	No. of positions (in Nos.)	7, 4, 0
TAP CHANGER	Voltage variation	+5% to -10% in steps of 2.5% for variation of HV, +5% to -15% in steps of 2.5% for variation of HV, +/-2.5% of rated voltage on HT side, +/-5% of rated voltage on HT side, +/-7.5% of rated voltage on HT side, +2.5% to -5% in steps of 2.5% for variation of HV, Not applicable
TERMINAL ARRANGEMENT	Transformer fitted with bushings of appropriate voltage and curent ratings on HV side	Yes. 3 Nos. (Conforming to IS:2099)
TERMINAL ARRANGEMENT	Transformer fitted with bushings of appropriate voltage and curent ratings on LV side	Yes. 4 Nos. (Conforming to IS:7421), Yes. 5 Nos. (Conforming to IS:7421)
TERMINAL ARRANGEMENT	Suitable provision for adoption of cables of suitable size on LV side	Yes. For PVC/XLPE Cables, No
TERMINAL ARRANGEMENT	Cable End Box on HV side	Yes, No
TERMINAL ARRANGEMENT	Cable End Box on LV side	Yes, No
AIR CLEARANCE	Minimum air clearances in cable box	as per Table 11 of IS:1180 (Part 1):2014 latest, Without cable box
AIR CLEARANCE	Suitable bimetallic connectors (clamp type) shall be provided on both HV and LV side in order to ensure sound and robust connection	Yes. For Bare bushing termination, Not applicable
MARKING	Material of rating plate	Anodized aluminium, Stainless steel
MARKING	Marking method on rating plate	Etching, Engraved, Stamped
MARKING	Rating and terminal marking plates combined into one plate	Yes, No
OPTIONAL FITTINGS	Dehydrating breather in lieu of plain breathing device for transformers	Yes, No
OPTIONAL FITTINGS	Filter Valve for transformers	Yes, No
OPTIONAL FITTINGS	Suitable rating lightning arrestors	HT Side, 1 No. per phase, No
OPTIONAL FITTINGS	Bird guard	Yes, No
OPTIONAL FITTINGS	Terminal connectors	Yes, No, Yes including Oil temperature indicator and winding temperature indicator, Buchholz relay, Unidirectional flat rollers, Yes including Oil temperature indicator and winding temperature indicator, Buchholz relay, Unidirectional flat rollers, Jacking pads, magnetic oil gauge
OPTIONAL FITTINGS	Non return valve	Yes, No
OPTIONAL FITTINGS	Pressure relief device or explosion vent (upto 200 KVA doe non-sealed type transformer)	Yes, No
OPTIONAL FITTINGS	Protection relay for sealed type transformers for internal parameters that is pressure, temperature, oil level and gas detection	Yes, No
OPTIONAL FITTINGS	Anti-theft stainless steel fasteners with breakway nut at top cover (upto 200 KVA)	Yes. 4 Nos., No
OPTIONAL FITTINGS	Drain cum sampling valve	Yes with steel plug, No
OPTIONAL FITTINGS	Self protection / disconnection devices	On secondary side (as per IS/IEC:60947- 2:2003, No
OPTIONAL FITTINGS	Expulsion fuse as disconnection device	On Primay side (as per IS:9385 (Part 2):1980, No
SERVICE CONDITION	Maximum altitude	<1000 m, <5000 m
TEST REPORTS & CERTIFICATIONS	Availability of type test reports to prove the confirmity of the specification from	Central Govt. Lab (Govt. Of India), NABL Accrediated, ILAC accrediated
SPECIAL TEST REPORTS	Availability of test report for Determination of sound level test	Yes, No
SPECIAL TEST REPORTS	Availability of test report for No load current at 112.5 % Voltage	Yes, No, Yes including short circuit withstand test
SPECIAL TEST REPORTS	Availability of test report for Paint adhesion test	Yes for 1 No., No
SPECIAL TEST REPORTS	BDV and moisture content of oil in the transformer	Yes for 1 No., No
SPECIAL TEST REPORTS	Other requirements	Losses and Impedance values as per Cl.6.8 and Table 3 of IS:1180 (Part 1):2014 latest, Limits of temepraturerise as per Cl.6.10 of IS:1180 (Part 1):2014 latest, Short circuit withstand test, Lightning impulse test as per IS:1180, Pressure test as per IS:1180

Item #3 Details

View Catalog

Category	Specification	Requirement
STANDARDS	Energy efficiency level	1, 2, 3
STANDARDS	BEE Star Rating	1, 2, 3, 4, 5
STANDARDS	Installation, Testing and Demonstration	Yes . Including Civil work, Yes . Excluding Civil work, No
STANDARDS	Minimum warranty (in Months) on receipt of stores, irrespective of the date of installation	30, 42, 54, 66, 78, 60, 36 Or higher
STANDARDS	Minimum warranty (in Months) from the date of installation (Note: If "0" is selected, "Minimum warranty (in Months) on receipt of stores" shall still be applicable irrespective of the date of installation	24, 36, 48, 60, 72, 0
RATINGS	Nominal system voltage, HV ( in kV)	3.3, 6.6, 11, 22, 33
RATINGS	Nominal system voltage, LV ( in V)	433
RATINGS	Standard ratings (in kVA)	100
RATINGS	Minimum basic insulation level (in kVP)	40, 60, 75, 125, 170
RATINGS	No load voltage ratios (in Volts)	3300/433-250, 6600/433-250, 11000/433-250, 22000/433-250, 33000/433-250, 3300/250 (mid-point earth type), 6600/250 (mid-point earth type)
RATINGS	Highest system voltage for equipment (in kV)	3.6, 7.2, 12, 17.5, 24, 36
RATINGS	Rated lightning impulse withstand voltage (in kV Peak) (Refer IS:1180 (Part 1):2014 Annex-D)	20, 40, 60, 85, 95, 125, 145, 170, 75
CONSTRUCTION	Core mateial	CRGO (as per IS:3024 latest), Amorphous Core material (as per IS:16585 latest )
CONSTRUCTION	Conductor (Winding) material	Aluminium, Copper
CONSTRUCTION	Type of Mounting	Pole Mounted, Ground Mounted
CONSTRUCTION	Method of system earthing	effectively earthed system, solidly earthed
CONSTRUCTION	Noise level at rated voltage and freqeuncy, Maximum (in dB)	45, 48, 51, 55
TRANSFORMER TANK	Transformer tank cover construction	Non-sealed, Bolted, Non-sealed, Clamped, Non-sealed, Welded, Sealed
TRANSFORMER TANK	Tank configuration with	With radiator fins, With out radiator fins, Cooling tubes, Corrugated panels, Min. 1 mm thick
TRANSFORMER TANK	Material of transformer tank	Stainless steel, Mild Steel
TRANSFORMER TANK	Minimum thickness of top and bottom material of transformer tank (in mm)	5, 6, 7, 8, 9, 10
TRANSFORMER TANK	Minimum thickness of side material of transformer tank (in mm)	3.15, 4, 4.5, 5, 6
TRANSFORMER TANK	Material of Bolts/Nuts/Wahers exposed to atmosphere	Stainless steel (for upto 12 mm size), Brass (for upto 12 mm size), Electro Galvanized (for above 12 mm size), Hot Dip Galvanized (for above 12 mm size)
TRANSFORMER TANK	Gaskets wherever used shall conform to	Type III (as per IS:11149) Type C (as per IS:4253 (Pt.2)
TRANSFORMER TANK	Provision of conservator	Yes , for Non sealed type with Plain tank construction, No
PAINTING	Type of painting on inside of tank (hint: Refer Table 12 of IS:1180 (Pt.1):2014)	Varnish, Oil resistant paint, Hot oil resistant paint
PAINTING	Type of painting on External surface of tank	Epoxy (Primer), Polyurethane (finish coat)
TAP CHANGER	Tap changing arrangement	On load, Off circuit , through link, Off circuit , externally operated switch with mechanical locking device and a position indicator, Off circuit, arrangement of locking at any tap position, Not applicable
TAP CHANGER	Winding tapped	HV, Not applicable
TAP CHANGER	No. of positions (in Nos.)	7, 4, 0
TAP CHANGER	Voltage variation	+5% to -10% in steps of 2.5% for variation of HV, +5% to -15% in steps of 2.5% for variation of HV, +/-2.5% of rated voltage on HT side, +/-5% of rated voltage on HT side, +/-7.5% of rated voltage on HT side, +2.5% to -5% in steps of 2.5% for variation of HV, Not applicable
TERMINAL ARRANGEMENT	Transformer fitted with bushings of appropriate voltage and curent ratings on HV side	Yes. 3 Nos. (Conforming to IS:2099)
TERMINAL ARRANGEMENT	Transformer fitted with bushings of appropriate voltage and curent ratings on LV side	Yes. 4 Nos. (Conforming to IS:7421), Yes. 5 Nos. (Conforming to IS:7421)
TERMINAL ARRANGEMENT	Suitable provision for adoption of cables of suitable size on LV side	Yes. For PVC/XLPE Cables, No
TERMINAL ARRANGEMENT	Cable End Box on HV side	Yes, No
TERMINAL ARRANGEMENT	Cable End Box on LV side	Yes, No
AIR CLEARANCE	Minimum air clearances in cable box	as per Table 11 of IS:1180 (Part 1):2014 latest, Without cable box
AIR CLEARANCE	Suitable bimetallic connectors (clamp type) shall be provided on both HV and LV side in order to ensure sound and robust connection	Yes. For Bare bushing termination, Not applicable
MARKING	Material of rating plate	Anodized aluminium, Stainless steel
MARKING	Marking method on rating plate	Etching, Engraved, Stamped
MARKING	Rating and terminal marking plates combined into one plate	Yes, No
OPTIONAL FITTINGS	Dehydrating breather in lieu of plain breathing device for transformers	Yes, No
OPTIONAL FITTINGS	Filter Valve for transformers	Yes, No
OPTIONAL FITTINGS	Suitable rating lightning arrestors	HT Side, 1 No. per phase, No
OPTIONAL FITTINGS	Bird guard	Yes, No
OPTIONAL FITTINGS	Terminal connectors	Yes, No, Yes including Oil temperature indicator and winding temperature indicator, Buchholz relay, Unidirectional flat rollers, Yes including Oil temperature indicator and winding temperature indicator, Buchholz relay, Unidirectional flat rollers, Jacking pads, magnetic oil gauge
OPTIONAL FITTINGS	Non return valve	Yes, No
OPTIONAL FITTINGS	Pressure relief device or explosion vent (upto 200 KVA doe non-sealed type transformer)	Yes, No
OPTIONAL FITTINGS	Protection relay for sealed type transformers for internal parameters that is pressure, temperature, oil level and gas detection	Yes, No
OPTIONAL FITTINGS	Anti-theft stainless steel fasteners with breakway nut at top cover (upto 200 KVA)	Yes. 4 Nos., No
OPTIONAL FITTINGS	Drain cum sampling valve	Yes with steel plug, No
OPTIONAL FITTINGS	Self protection / disconnection devices	On secondary side (as per IS/IEC:60947- 2:2003, No
OPTIONAL FITTINGS	Expulsion fuse as disconnection device	On Primay side (as per IS:9385 (Part 2):1980, No
SERVICE CONDITION	Maximum altitude	<1000 m, <5000 m
TEST REPORTS & CERTIFICATIONS	Availability of type test reports to prove the confirmity of the specification from	Central Govt. Lab (Govt. Of India), NABL Accrediated, ILAC accrediated
SPECIAL TEST REPORTS	Availability of test report for Determination of sound level test	Yes, No
SPECIAL TEST REPORTS	Availability of test report for No load current at 112.5 % Voltage	Yes, No, Yes including short circuit withstand test
SPECIAL TEST REPORTS	Availability of test report for Paint adhesion test	Yes for 1 No., No
SPECIAL TEST REPORTS	BDV and moisture content of oil in the transformer	Yes for 1 No., No
SPECIAL TEST REPORTS	Other requirements	Losses and Impedance values as per Cl.6.8 and Table 3 of IS:1180 (Part 1):2014 latest, Limits of temepraturerise as per Cl.6.10 of IS:1180 (Part 1):2014 latest, Short circuit withstand test, Lightning impulse test as per IS:1180, Pressure test as per IS:1180

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI

Historical Data

Required Documents

Certificate (Requested in ATC)

Additional Doc 1 (Requested in ATC)

Additional Doc 2 (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Similar Tenders

5 found

Urgent

NHPC Tanakpur Power Station Transformer Tender 3 Phase up to 200 KVA IS 1180 2014 Uttarakhand 2025

N/a

📍 CHAMPAWAT, UTTARAKHAND

EMD: ₹15,000

Est: ₹7.6 L

⏰ Deadline: 7 days left

🛒 Type: Goods

View GEM

Urgent

Distribution Transformer, 3 Phase, 11 kV > 200 KVA up to and Including 2500 KVA

Eastern Railway

📍 BARDHAMAN, WEST BENGAL

Est: ₹8.9 L

⏰ Deadline: 7 days left

🛒 Type: Goods

View GEM

Urgent

E-municipalities Uttar Pradesh Distribution Transformer Tender 3 Phase up to 200 kVA ISO 9001 2026

E-municipalities - Eservices To Citizens And Employees Of Urban Local Bodies Of Uttar Pradesh

📍 ETAH, UTTAR PRADESH

EMD: ₹36,000

⏰ Deadline: 6 days left

🛒 Type: Goods

View GEM

Urgent

Providing 04 nos. 200 KVA Transformers, H.T. 11 KV Line, L.T. Line and Street lights in Sector12 at Faridabad including 6 years Defect liability period of transformer and 3 years defect liability period of all other items and including ON/OFF and mai

Haryana Board Corporation

📍 FARIDABAD, HARYANA

EMD: ₹53,840

Est: ₹26.9 L

⏰ Deadline: 5 days left

🛒 Type: Works

View EPROCURE

Urgent

Distribution Transformer, 3 Phase, Up to and including 200 KVA

N/a

📍 RAJGARH, MADHYA PRADESH

EMD: ₹25,000

⏰ Deadline: 4 days left

🛒 Type: Goods

View GEM

Explore More Opportunities

Quick Access

All Tenders Browse all opportunities

MAHARASHTRA State tenders

CHANDRAPUR , MAHARASHTRA City tenders

Unlock Tender Documents

Performance Analytics

7-metric analysis with year-wise breakdown

Competitor Intelligence

Multi-dimensional analysis across 6 parameters

Market Penetration

By department, ministry, geography & category

Historical Analysis

Complete tender history with results

Documents 10

GeM-Bidding-8751916.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Browse Tenders

Categories

States

Cities

Authorities

Government Tender Published for Distribution Transformer, 3 Phase, 11 kV > 200 KVA up to and Including 2500 KVA,Distribution Transf in CHANDRAPUR, MAHARASHTRA

Past Similar Tenders (Historical Results)

Indian Army High Pot Machines Tender 2025 Department Of Military Affairs 230V IS 550 50 Hz

Indian Army XLPE Cable & LED Lighting Tender 2025 Ahmedabad Gujarat IS 7098 IS 694 MCCB

Distribution Transformer, 3 Phase, 11 kV > 200 KVA up to and Including 2500 KVA

Indian Army XLPE Cables & Transformer Accessories Tender Solan Himachal Pradesh 2025 IS 7098 Part 1/2 BIS Licenses

Indian Council Of Agricultural Research transformer procurement 3-Phase 11 kV 200-2500 kVA Dare Rajasthan 2025

Technical Specifications 3 Items

Item #1 Details

Item #2 Details

Item #3 Details

🤖 AI-Powered Bidder Prediction

Required Documents

Similar Tenders

NHPC Tanakpur Power Station Transformer Tender 3 Phase up to 200 KVA IS 1180 2014 Uttarakhand 2025

Distribution Transformer, 3 Phase, 11 kV > 200 KVA up to and Including 2500 KVA

E-municipalities Uttar Pradesh Distribution Transformer Tender 3 Phase up to 200 kVA ISO 9001 2026

Providing 04 nos. 200 KVA Transformers, H.T. 11 KV Line, L.T. Line and Street lights in Sector12 at Faridabad including 6 years Defect liability period of transformer and 3 years defect liability period of all other items and including ON/OFF and mai

Distribution Transformer, 3 Phase, Up to and including 200 KVA

Explore More Opportunities

Unlock Tender Documents

Documents 10

GeM-Bidding-8751916.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

Other Documents

Other Documents

Other Documents

Other Documents

Buyer uploaded ATC document

GEM General Terms and Conditions Document

Documents

Unlock All Documents

GeM-Bidding-8751916.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

Other Documents

Other Documents

Other Documents

Other Documents

Buyer uploaded ATC document

GEM General Terms and Conditions Document

Sign In Required

Why Sign In?

Never Miss a Tender!

Tender Alerts

Where should we send alerts?

✓ Alert Setup Complete!