Open Tender for AIR BLOW GUN WITH STANDARD ACCESSORIES,AIR RATCHET WITH STANDARD ACCESSORIES,CUT SECTION WORKING MO in JAMNAGAR, GUJARAT
Progress
Public procurement opportunity for Directorate Of Employment & Training AIR BLOW GUN WITH STANDARD ACCESSORIES, AIR RATCHET WITH STANDARD ACCESSORIES, CUT SECTION WORKING MODEL OF ROTARY CLUTCH ASSEMBLY OF TWO WHEELER, CUT-SECTION MODEL OF A CONTINUOUS VARIABLE TRANSMISSION, DEMONSTRATION BOARD OF MAGNETO IGNITION SYSTEM OF A TWO WHEELER, GROWLER, IGNITION COIL AND CDI UNIT OF FOUR DIFFERENT MAKE, LAYOUT OF WORKING MODEL 12 V AUTOMOBILE ELECTRICAL SYSTEMS, LIFTER VALVE SPRING, PISTON RING COMPRESSOR, VALVE SPRING COMPRESSOR UNIVERSAL in JAMNAGAR, GUJARAT. Quantity: 17 issued by. Submission Deadline: 22-10-2026 18: 00: 00. View full details and respond.
Tender Data
Bid Details
Quantity
17
Category
CUT SECTION WORKING MODEL OF ROTARY CLUTCH ASSEMBLY OF TWO WHEELER
Bid Type
Two Packet Bid
Bid Validity
180 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
RA Qualification Rule
H1-Highest Priced Bid Elimination
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
No
MII Purchase Preference
Yes
MII Preference Band
L1+20%
MSE Purchase Preference
Yes
MSE Preference Band
L1+20%
MSE Exemption/Relaxation
No
Startup Exemption/Relaxation
Yes
Bid Splitting Applied
No
Requirements
Past Performance
50 %
Warranty Period
15 days
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
AIR BLOW GUN WITH STANDARD ACCESSORIES , AIR RATCHET WITH STANDARD ACCESSORIES , CUT SECTION WORKING MODEL OF ROTARY CLUTCH ASSEMBLY OF TWO WHEELER , CUT-SECTION MODEL OF A CONTINUOUS VARIABLE TRANSMISSION , DEMONSTRATION BOARD OF MAGNETO IGNITION SYSTEM OF A TWO WHEELER , GROWLER , IGNITION COIL AND CDI UNIT OF FOUR DIFFERENT MAKE , LAYOUT OF WORKING MODEL 12 V AUTOMOBILE ELECTRICAL SYSTEMS , LIFTER VALVE SPRING , PISTON RING COMPRESSOR , VALVE SPRING COMPRESSOR UNIVERSAL
Advisory Bank
State Bank of India
ePBG Percentage
5%
ePBG Duration (Months)
12
Payment Timelines
Payments shall be made to the Seller within 45 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Pre-Bid & Qualification
Pre-Bid Date
13-10-2026 14:00:00
Pre-Bid Venue
ITI BHANVAD, TRAN PATIYA ROAD, NEAR MARKETING YARD, BHANVAD, TA- BHANVAD, DI-DEVBHUMI DWARKA-360510
Delivery Details
Max Delivery Days
15
Delivery Locations
1
Delivery Cities
Devbhumi Dwarka
Delivery Pincodes
360510
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Nareshkumar B Kathrotiya | 360510,GOVT. INDUSTRIAL TRAINING INSTITUTE, BHANVAD, BHANVAD TRAN PATIYA ROAD, TA- BHANVAD, DI - DEVBHUMI DWARKA | Devbhumi Dwarka | Gujarat | 360510 | 3 | 15 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-9974273.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
11 Items Sign in to view GEM price trends Sign in for GEM prices
AIR BLOW GUN WITH STANDARD ACCESSORIES
TRIGGER OPERATED WITH INTERCHANGEABLE NOZZLES
AIR RATCHET WITH STANDARD ACCESSORIES
Air ratchet with air pressure of 90 PSI, maximum torque of 27 Nm, free speed of 240 RPM and standard bolt size of 10 mm. Overall length shall be approximately 200 mm. Average air consumption shall be 2.5 CFM. Air inlet shall be 1/4 inch and minimum hose size shall be 10 mm. The air ratchet shall be supplied with a suitable PVC or metal storage case for safe storage.
CUT SECTION WORKING MODEL OF ROTARY CLUTCH ASSEMBLY OF TWO WHEELER
Real two wheeler multi plate wet clutch assembly for automobile lab training to demonstrate power connection and disconnection. The clutch shall have cut sections to clearly show friction plates, steel plates, clutch hub, pressure plate, clutch basket and release springs. Internal moving parts and cut edges shall be painted in different bright colors for easy identification. A manual hand lever or rotating handle shall be provided to operate the clutch release mechanism and allow students to observe plate movement and power transfer. The complete unit shall be mounted on a heavy duty powder coated steel frame with rubber feet for stable table top use and protection against rust.
CUT-SECTION MODEL OF A CONTINUOUS VARIABLE TRANSMISSION
System Overview A real two wheeler scooter CVT assembly designed for technical training to demonstrate continuous gear ratio variation Sectioning & Visibility Cleanly cut sections clearly show internal parts like variator rollers, sliding sheaves, V belt, torque spring, and centrifugal clutch. Color Codin Cut surfaces and moving parts are painted in bright, contrasting colors for easy component identification. Operation Equipped with a manual hand crank to rotate input shafts and observe real time pulley diameter changes and automatic speed ratio shifts. Mounting and Finish Mounted on a heavy duty, powder coated steel base with anti corrosion treatment on all metal parts.
DEMONSTRATION BOARD OF MAGNETO IGNITION SYSTEM OF A TWO WHEELER
Open board educational system for automobile laboratory training to demonstrate magneto ignition and spark generation in two wheelers without an external battery. The model shall include original two wheeler magneto assembly with flywheel and stator or rotor, ignition coil, contact breaker points or pickup coil, condenser, ignition switch, high tension wire and spark plug. All components shall be mounted on a strong non conductive bakelite or acrylic board with simple circuit diagram, component names and color coded wiring. A manual hand crank or variable speed electric motor shall be provided to rotate the magneto and produce sparks at the spark plug during operation. The complete unit shall be mounted on a strong powder coated steel frame with rubber feet for stable table top demonstration.
GROWLER
Growler for testing starter motor armatures. The unit shall produce 10 A secondary output when operated on 220 to 230 V supply. It shall detect earth faults, short circuits and open circuits in the starter motor armature. It shall check the earth condition of the armature and detect short circuits in the armature core. Input supply shall be single phase 220 to 260 V, 50 to 60 Hz. Testing current shall be 2 A. Testing range shall be 40 to 120 mm diameter. Testing voltage shall be 12 V and 24 V.
IGNITION COIL AND CDI UNIT OF FOUR DIFFERENT MAKE
IGNITION COIL AND CDI UNIT OF FOUR DIFFERENT MAKE
LAYOUT OF WORKING MODEL 12 V AUTOMOBILE ELECTRICAL SYSTEMS
12 V DC educational demonstration board for automobile laboratory training to demonstrate complete vehicle electrical circuits. The board shall include genuine 12 V automotive components such as high and low beam headlights, turn indicators, tail light, brake light, electric horn, ignition switch, fuse box, flasher unit, relays, control switches and battery terminals. It shall have 12 V DC power supply or battery connection. All components shall be mounted on a strong insulated acrylic or bakelite board with a clear color coded wiring diagram and labeled terminals. The system shall be fully functional for operating lights, indicators and horn. Measurement points with banana sockets shall be provided for checking voltage, continuity and current. The complete unit shall be mounted on a heavy duty powder coated steel frame with rubber mounts for stable table top use.
LIFTER VALVE SPRING
Valve Lifter
PISTON RING COMPRESSOR
Piston ring compressor with self locking ratchet mechanism for fitting pistons in most two wheelers. Made from high grade spring steel. Suitable for piston ring sizes up to 125 mm diameter.
VALVE SPRING COMPRESSOR UNIVERSAL
VALVE SPRING COMPRESSOR UNIVERSAL
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | AIR BLOW GUN WITH STANDARD ACCESSORIES | TRIGGER OPERATED WITH INTERCHANGEABLE NOZZLES | 3 | nos | bhanvad_con | 15 | |
| 2 | AIR RATCHET WITH STANDARD ACCESSORIES | Air ratchet with air pressure of 90 PSI, maximum torque of 27 Nm, free speed of 240 RPM and standard bolt size of 10 mm. Overall length shall be approximately 200 mm. Average air consumption shall be 2.5 CFM. Air inlet shall be 1/4 inch and minimum hose size shall be 10 mm. The air ratchet shall be supplied with a suitable PVC or metal storage case for safe storage. | 2 | nos | bhanvad_con | 15 | |
| 3 | CUT SECTION WORKING MODEL OF ROTARY CLUTCH ASSEMBLY OF TWO WHEELER | Real two wheeler multi plate wet clutch assembly for automobile lab training to demonstrate power connection and disconnection. The clutch shall have cut sections to clearly show friction plates, steel plates, clutch hub, pressure plate, clutch basket and release springs. Internal moving parts and cut edges shall be painted in different bright colors for easy identification. A manual hand lever or rotating handle shall be provided to operate the clutch release mechanism and allow students to observe plate movement and power transfer. The complete unit shall be mounted on a heavy duty powder coated steel frame with rubber feet for stable table top use and protection against rust. | 1 | nos | bhanvad_con | 15 | |
| 4 | CUT-SECTION MODEL OF A CONTINUOUS VARIABLE TRANSMISSION | System Overview A real two wheeler scooter CVT assembly designed for technical training to demonstrate continuous gear ratio variation Sectioning & Visibility Cleanly cut sections clearly show internal parts like variator rollers, sliding sheaves, V belt, torque spring, and centrifugal clutch. Color Codin Cut surfaces and moving parts are painted in bright, contrasting colors for easy component identification. Operation Equipped with a manual hand crank to rotate input shafts and observe real time pulley diameter changes and automatic speed ratio shifts. Mounting and Finish Mounted on a heavy duty, powder coated steel base with anti corrosion treatment on all metal parts. | 1 | nos | bhanvad_con | 15 | |
| 5 | DEMONSTRATION BOARD OF MAGNETO IGNITION SYSTEM OF A TWO WHEELER | Open board educational system for automobile laboratory training to demonstrate magneto ignition and spark generation in two wheelers without an external battery. The model shall include original two wheeler magneto assembly with flywheel and stator or rotor, ignition coil, contact breaker points or pickup coil, condenser, ignition switch, high tension wire and spark plug. All components shall be mounted on a strong non conductive bakelite or acrylic board with simple circuit diagram, component names and color coded wiring. A manual hand crank or variable speed electric motor shall be provided to rotate the magneto and produce sparks at the spark plug during operation. The complete unit shall be mounted on a strong powder coated steel frame with rubber feet for stable table top demonstration. | 1 | nos | bhanvad_con | 15 | |
| 6 | GROWLER | Growler for testing starter motor armatures. The unit shall produce 10 A secondary output when operated on 220 to 230 V supply. It shall detect earth faults, short circuits and open circuits in the starter motor armature. It shall check the earth condition of the armature and detect short circuits in the armature core. Input supply shall be single phase 220 to 260 V, 50 to 60 Hz. Testing current shall be 2 A. Testing range shall be 40 to 120 mm diameter. Testing voltage shall be 12 V and 24 V. | 1 | nos | bhanvad_con | 15 | |
| 7 | IGNITION COIL AND CDI UNIT OF FOUR DIFFERENT MAKE | IGNITION COIL AND CDI UNIT OF FOUR DIFFERENT MAKE | 1 | nos | bhanvad_con | 15 | |
| 8 | LAYOUT OF WORKING MODEL 12 V AUTOMOBILE ELECTRICAL SYSTEMS | 12 V DC educational demonstration board for automobile laboratory training to demonstrate complete vehicle electrical circuits. The board shall include genuine 12 V automotive components such as high and low beam headlights, turn indicators, tail light, brake light, electric horn, ignition switch, fuse box, flasher unit, relays, control switches and battery terminals. It shall have 12 V DC power supply or battery connection. All components shall be mounted on a strong insulated acrylic or bakelite board with a clear color coded wiring diagram and labeled terminals. The system shall be fully functional for operating lights, indicators and horn. Measurement points with banana sockets shall be provided for checking voltage, continuity and current. The complete unit shall be mounted on a heavy duty powder coated steel frame with rubber mounts for stable table top use. | 1 | nos | bhanvad_con | 15 | |
| 9 | LIFTER VALVE SPRING | Valve Lifter | 1 | nos | bhanvad_con | 15 | |
| 10 | PISTON RING COMPRESSOR | Piston ring compressor with self locking ratchet mechanism for fitting pistons in most two wheelers. Made from high grade spring steel. Suitable for piston ring sizes up to 125 mm diameter. | 3 | nos | bhanvad_con | 15 | |
| 11 | VALVE SPRING COMPRESSOR UNIVERSAL | VALVE SPRING COMPRESSOR UNIVERSAL | 2 | nos | bhanvad_con | 15 |
Categories
77
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender