Invitation to Bid - Contactor and auxiliary contacts,Cut out Relays 16A, 440V,HIGH PRESSURE SODIUM LAMP COMPLETE SET,LO in AHMEDABAD, GUJARAT
Progress
Directorate Of Employment & Training invites bids for Contactor and auxiliary contacts, Cut out Relays 16A, 440V, HIGH PRESSURE SODIUM LAMP COMPLETE SET, LO in AHMEDABAD, GUJARAT. Quantity: 989. Submission Deadline: 17-11-2026 17: 00: 00. Submit your proposal before the deadline.
Tender Data
Bid Details
Quantity
989
Bid Validity
180 (Days)
Bid Type
Service
Evaluation
Item wise evaluation
Preference & Exemptions
EMD Required
Yes
MII Purchase Preference
Yes
MII Preference Band
L1+20%
MSE Purchase Preference
Yes
MSE Preference Band
L1+20%
MSE Exemption/Relaxation
No
Startup Exemption/Relaxation
Yes
Bid Splitting Applied
No
Requirements
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Advisory Bank
State Bank of India
Payment Timelines
Payments shall be made to the Seller within 45 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Pre-Bid & Qualification
Pre-Bid Date
03-11-2026 15:00:00
Pre-Bid Venue
INDUSTRIAL TRAINING INSTITUTE, MANINAGAR, NEAR RTO (EAST) OFFICE, MAHADEV NAGAR, VASTRAL ROAD, AHMEDABAD-382418
Delivery Details
Max Delivery Days
15
Delivery Locations
1
Delivery Cities
Ahmadabad
Delivery Pincodes
382418
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Shaileshkumar Shivlal Patel | 382418,GOVT. INDUSTRIAL TRAINING INSTITUTE, MANINAGAR (VASTRAL), NEAR - KHARIKAT CANAL, NEAR - R.T.O. OFFICE (EAST), VASTRAL ROAD, TA - AHMEDABAD CITY, DI - AHMEDABAD | Ahmadabad | Gujarat | 382418 | 2 | 15 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-10082334.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Corrigendum Updates
1 Update Update
Extended Deadline
17-Nov-2026, 11:30 am
Opening Date
18-Nov-2026, 11:30 am
Bill of Quantities (BOQ)
199 Items Sign in to view GEM price trends Sign in for GEM prices
Contactor and auxiliary contacts
3 PHASE, 415 VOLT, 25 A WITH 2NO AND 2NC CONTACTS
Cut out Relays 16A, 440V
16A, 440V
HIGH PRESSURE SODIUM LAMP COMPLETE SET
150W 240V
LOW PRESSURE SODIUM LAMP COMPLETE SET
150W 240V
Rubber mat
2 ft x 4ft x 1 inch (FOR ELECTRICIAN TRADE)
Digital Multi Meter
DC 200mv -1000v, 0 - 10A and AC 200mv- 750v , 0-10A, resistance 0-20 M Ohm and 3 1/2 digit
4 point D.C. Starter For 2.5 KW DC motor
For 2.5 KW DC motor
AC Starters Resistance type starter For A.C Motors of 2 to 5 H.P.
For A.C Motors of 2 to 5 H.P.
AC Starters Star Delta Starter- Manual For A.C Motors of 2 to 5 H.P.
For A.C Motors of 2 to 5 H.P.
AC Starters Star Delta Starter Semi automatic For A.C Motors of 2 to 5 H.P.
For A.C Motors of 2 to 5 H.P.
AC Starters Auto Transformer type For A.C Motors of 2 to 5 H.P.
For A.C Motors of 2 to 5 H.P.
Manual Motor coil Winding Machine With step arbor
Gear Ratio - 1 to 3 or 1 to 10 Step Arbor (Mandrels/Farma) - a set of adjustable, multi-stepped dies/dies or rectangular formers. Turn Counter - Integrated mechanical (analog) 5-digit revolution counter. Wire Gauge Compatibility - super-enamelled copper wires (SWG 16 to SWG 37) Maximum coil diameter - Up to 150 - 200 mm. Maximum coil width - 70 - 100 mm.
DIGITAL I.C. TESTER
Power Source Battery Cell, AA Battery
HOME THEATRE SOUND SYSTEM
100W Power, Powerful Subwoofer, USB port, Bluetooth
CALIPER INSIDE SPRING
CALIPER INSIDE SPRING 6 INCH / 15 CM
CALIPER HERMACHRODITE.SPRING 15 CM
CALIPER HERMAPHRODITE SPRING 15 CM
DIVIDER SPRING
DIVIDER SPRING 6 INCH / 15 CM
CALIPER OUTSIDE SPRING 20 CM
CALIPER OUTSIDE SPRING 20 CM
ANGLE PLATE SIZE 200 X 100 X 200 MM
ANGLE PLATE SIZE 200 X 100 X 200 MM
OIL STONE UNIVERSEL SILICON CARBIDE
OIL STONE (CARBORUNDUM) UNIVERSEL SILICON CARBIDE COMBINATION ROUGH AND FINE) 150 X 50 X 25 MM
DRILL TWIST SS NUMBER 0 TO 60 SET
DRILL TWIST S.S NUMBER 0 TO 60 SET
TWIST DRILLS 3MM TO 13MM, PARALLEL SHANK
TWIST DRILLS 3MM TO 13MM (PARALLEL SHANK)
GRINDING WHEEL DRESSER DIAMOND
GRINDING WHEEL DRESSER (DIAMOND)
REAMER ADJUSTABLE 10 MM TO 15 MM IN STEPS OF 1 MM SET
REAMER ADJUSTABLE 10 MM TO 15 MM IN STEPS OF 1 MM - SET
TOOL BIT HOLDER AS ARMSTRONG L.H.
TOOL BIT HOLDER AS ARMSTRONG L.H.
TOOL BIT HOLDER AS ARMSTRONG R.H.
TOOL BIT HOLDER AS ARMSTRONG R.H.
CHUCK -TABLE 75 MM JAW SWIVEL BASE 200 MM DIA
CHUCK -TABLE 75 MM JAW SWIVEL BASE 200 MM DIA. 3 JAWS WITH BOLTING ARRANGEMENT AND GRADUATED INDEGREES
ANGLE PLATE - UNIVERSAL TABLE
ANGLE PLATE - UNIVERSAL TABLE
KNURLING TOOL
KNURLING TOOL (DIAMOND, STRAIGHT)
DUAL POWER SUPPLY, 230V, 50HZ, FUSE-800MA
230V, 50HZ, FUSE-800MA
SYNCHRONOUS MOTOR
240V, 60RPM, CAPACITOR FOR SYNCHRONOUS MOTOR (0.8MF (+/- 5%) 450 VAC)
POWER SUPPLY
0-30V DC, 3A
CUTTER SIDE AND FACE B 100 X 12 X 27
CUTTER SIDE AND FACE B 100 X 12 X 27
CUTTER DOUBLE ANGLE UNEQUAL
CUTTER DOUBLE ANGLE UNEQUAL 50 X 12 BORE DIA 27 MM 55 DEG.
CUTTER DOUBLE ANGLE UNEQUAL
CUTTER DOUBLE ANGLE UNEQUAL 63 X 18 BORE DIA 27 MM 70 DEG
CUTTER DOUBLE ANGLE UNEQUAL
CUTTER DOUBLE ANGLE UNEQUAL 63 X 18 BORE DIA 27 MM 75 DEG
CUTTER SHELL END MILL
CUTTER SHELL END MILL DIA. 50 MM X 36 MM WIDTH X DIA. 27 BORE
CUTTER SHELL END MILL
CUTTER SHELL END MILL DIA. 75 MM X 50 MM WIDTH X DIA. 27 BORE
CUTTER PARALLEL SHANK END MILLS SET
CUTTER PARALLEL SHANK END MILLS DIA 6 MM, 10 MM,16 MM SET DOUBLE FLUTED
CUTTER T SLOT WITH PARALLEL SHANK
CUTTER T SLOT WITH PARALLEL SHANK - CUTTER DIA. 17.5 X 8 MM WIDTH X DIA. OF SHANK 8 MM
IVOLUTE MILLING CUTTER 2 MODULE
IVOLUTE MILLING CUTTER 2 MODULE
TAPER GAUGE M.T.NO. 1,2,3,4 and 5
TAPER GAUGE M.T.NO. 1,2,3,4 & 5
PLANER GAUGE STANDARD SIZE
PLANER GAUGE STANDARD SIZE
GRINDER WITH TWO 18 CM WHEELS
GRINDER WITH TWO 18 CM WHEELS WITH TWIST DRILL GRINDING ATTACHMENT.
AC alternator slip ring puller, Variable
AC Alternator slip ring puller made from hardened and tempered steel for removing alternator slip rings having outside diameter ranging between 25 to 50 mm.
Engineers stethoscope
Engineers Stethoscope -Mechanical-Hollow Tube type having a super-thin diaphragm and hollow Stainless steel probe of minimum 200 mm length that securely amplifies noises and isolates the exact location of low decible noise.
Stud extractors
Stud extractor set of 3 made of high carbon steel and size 5 mm, 6 mm and 8 mm in a box.
De-soldering pump
40 W
Rubber mat, 180x45x2.5 cm
180x45x2.5 cm
Signal tracer
Input Impedance - High impedance (typically above 50K Ohm),Gain & Sensitivity - Approximately 40dB ,Output - Built-in speaker (often 0.5W at 8 Ohm),Power Supply - Ranges from 9V
Conductivity meter
Material - Mild Steel, Conductivity Range-1000 mS/cm, Light Source-LED, Display Type3 1/2 DIGIT LED DISPLAY
Needle destroyer
220-250V AC Supply 50-60Hz. Low Power Consumption.
Oxygen concentration
POWER CONSUMPTION 610 WATTS
Flow meter
Poly Carbonate Material, Analog Display Type
Colorimeter
8 Digital Filters, 405-700 nm Wavelength Range, 1ml Sample Volume
SOUND SYSTEM
2.1
PATCH PANEL 24 PORT
24 Port
PLUMB BOB 115 GRAMS
115 GRAMS
SINGLE PHASE ENERGY METER
SOLID STATE SOLAR BASE (BIDIRECTIONAL) 5-30AMP,240V
FLUX METER 0-500 tesla
0-500 tesla
RUBBER MAT 2 METERS X 1 METER X 9 MM
2 METERS X 1 METER X 9 MM
RECHARGEABLE BATTERY 12V,100AH
12V,100AH
RECHARGEABLE BATTERY RECHARGEABLE BATTERY 6V,7AH
6V,7AH
SOLAR CHARGE CONTROLLER
SOLAR CHARGE CONTROLLER WITH MANUAL SWITCH ( DAY LIGHTING) 6 V ,5 A
TABLE FOR DEMONSTRATION 2.5 X 1.20 X 0.75 METERS
2.5 X 1.20 X 0.75 METERS
PROTRACTER CELLULOID CEMICIRCULAR 15 cm semi- circular.
PROTRACTER CELLULOID CEMICIRCULAR 15 cm semi- circular.
SURVEY PLOTTING SCALES WITH OFFSET BITS
SURVEY PLOTTING SCALES WITH OFFSET BITS (6 IN ONE SET) 30 cms long withoffset scales.
SET SQUARE CELLULIOD 45 DEGREE
SET SQUARE CELLULIOD 45 DEGREE -8 INCH 20 cm, 2 mm thick with bevelled edges 45 degree .
SET SQUARE 30 - 60 DEGREE IS 1561
SET SQUARE 30 - 60 DEGREE (250X1.5 M.M.) IS 1561 25 cm, 2mm thick with bevelled edges60 degrees.
MINI DRAFTER 750mm
MINI DRAFTER 750mm/Mini drafter/ Parallel Bar
RANGING RODS WOODEN FITTED WITH IRON SHOE 2METERS LONG.
RANGING RODS WOODEN FITTED WITH IRON SHOE 2METERS LONG.
WOODEN PEGS
AS PER STANDARD SIZE
PRISMATIC COMPASS WITH STAND 110 mm dia.
PRISMATIC COMPASS WITH STAND 110 mm dia.
TABLE FOR SERVER, PRINTER, SCANNER 650 X 500 X 750 MM
TABLE FOR SERVER/PRINTER/SCANNER 650 X 500 X 750 MM
Drawing table 750mm X 550mm
Drawing table 750mm X 550mm
DRAWING BOARD
Drawing Board 750mm X 550mm
BRADAWL
1/4 INCH
1 PHASE CEILING FAN 900 Mm
1 PHASE 900 MM
1 PHASE CEILING FAN 1200 mM
1 PHASE 1200 MM
1 PHASE CEILING FAN 1400 mM
1 PHASE 1400 MM
SEMI AUTOMATIC STAR DELTA STARTER FOR AC MOTOR
7.5 HP 415 V, 3-Phase, 50 Hz AC supply.
2 POINT STARER FOR D.C.MOTOR
3 HP 220 V
4 POINT STARER FOR D.C.MOTOR
3 HP 220 V
SINGLE PHASE PREVENTER
415 VOLT
DIGITAL MULTIMETER
DC 200mv -1000v, 0 - 10A & AC 200mv- 750v , 0-10A, resistance 0-20 M Ohm and 3 1/2 digit
CLIPON METER 0-100 A
0-100 A
EARTH TESTER 10000 Ohm
10000 Ohm
S.W.G. Wire GAUGE
Wire Gauge - Metric
WATER LEVEL CONTROLLER
415 V
PULLEY PULLER WITH 3 LEGS 150MM, 300MM
150MM, 300MM
ELECTRICAL DRILL PORTABLE 0-12MM, 750W
0-12MM, 750W
STATER CORE FOR 3 PHASE SQUIRREL CAGE INDUCTION MOTOR 24 SLOT
3 PHASE SQUIRREL CAGE INDUCTION MOTOR 24 SLOT
STATER CORE FOR 3 PHASE SQUIRREL CAGE INDUCTION MOTOR 36 SLOT
3 PHASE SQUIRREL CAGE INDUCTION MOTOR 36 SLOT
OPEN WELL MOTOR 1 HP, 230V, 1440 RPM 1 PHASE
1 HP, 230V, 1440 RPM 1 PHASE
OPEN WELL MOTOR 3 HP, 440V, 1440 RPM 3 PHASE
3 HP, 440V, 1440 RPM 3 PHASE
SUBMERCIBLE PUMP 2 HP,440V, 3 PHASE
2 HP,440V, 3 PHASE
SUBMERCIBLE PUMP 1 HP,230V, 1 PHASE
1 HP,230V, 1 PHASE
MOTOR PUMP SET 1 HP, 230V, 1 PHASE
1 HP, 230V, 1 PHASE
SMALL PLASTIC BOWLS 6 inch DIAMETER
6 INCH DIAMETER
PACK AND BLEACH BRUSH
length - 16 cm ,width - 3cm
PADDLE BRUSH
Length - 24 cm to 28 cm Width - 7 cm to 9 cm ,ball tipped nylon pins static bristles.
DYE BRUSH
Synthetic water based ,Width - 1 to 2.5 inch ,3 to 4 inch
FIRST AID KIT
Medium size metalic box min size - 32.5x28.5x8 cm wall mountable
PROFESSIONAL HAIRBRUSHES SET
Round Brush Size - 25mm to 53 mm,Barrel
CRIMPER
Micro crimper 1/2 inch to 3/4 inch wide, Heat range- High quality crimper operate between 150 Celsius to 230 Celsius PTC or MCH heaters auto cut off dual voltage facility
WAX HEATER
Power - 80W to 100W, 220V to 240V, 45C to 120c thermostat ranging, capacities 4000ml to 500ml, key Features auto cut off for safety & non Stick aluminum removable pots
PEDI SPA TUB
include a 22 to 28 - liter water capacity, dimensions around 24 inch X 20 inch X 15 inch, and a durable fiberglass or acrylic shell.
YOGA MAT
1. Dimensions Standard - 68 inch X 24 inch (173 cm X 61 cm) - Best for average-height individuals Long & Wide - 72 inch 84 inch length X 26 inch - 36 inch width Provides extra space so your head and feet stay on the mat. Travel Folds flat and weighs under 1 kg. 2. Thickness- 1.5 mm to 3 mm, Ultra-lightweight and portable. Best for travel, hot yoga, or strong ground connection during Ashtanga 4 mm to 5 mm, Industry standard. Offers a perfect balance of joint cushioning and stability for balancing poses in Vinyasa and Hatha yoga 6 mm to 10 mm, Ideal for joint pain, restorative, or Yin yoga. Provides maximum cushioning but can make balancing poses more challenging. 3. Materials TPE (Thermoplastic Elastomer) Eco-friendly, lightweight, and recyclable. Features great grip, tear resistance, and moderate cushioning. Natural Rubber - Best grip/traction, eco-friendly, but heavier and prone to degrading in direct sunlight. PVC - Highly durable and provides excellent sticky grip, but contains synthetic chemicals and is not biodegradable. PU (Polyurethane), Exceptional wet/sweat grip for hot yoga, though it requires more maintenance. EVA / NBR, Affordable and lightweight, but less dense and prone to flattening over time. 4. Texture and Grip Open-Cell - Acts like a sponge to absorb sweat. Excellent for hot yoga.Closed-Cell - Does not absorb sweat. Easier to clean, but can become slippery when wet. Textured patterns enhance surface friction
THIMBLES
AS PER AVAILABLE IN MARKET
FRENCH CURVE
AS PER AVAILABLE IN MARKET
THREAD CUTTER
AS PER AVAILABLE IN MARKET
LEG SHAPER
AS PER AVAILABLE IN MARKET
GARMNET HANGERS
WOODEN SUIT HANGERS
Digital Still Camera High resolution amateur camera
High resolution amateur camera
D.C. COMPOUND MOTOR 3 H.P. 250 V
WITH 4 POINT STARTER AND FIELD REGULATOR(LABORATORY TYPE)
ELEVATOR ROPE CUTTER UP TO 32 MM
UP TO 32 MM
RAIL ALIGNMENT GAUGE
330MM
ELECTROMAGNET BREAK ASSEMBLY
BRAKE SIZE - 250 MM, COIL VOLTAGE -220 V AC , BRAKE TYPE - AC FAIL SAFE
CONTROL TRANSFORMER
SINGLE PHASE 250 W WITH 12V, 24V, 48V, 110V AND 240V TAPPING
POTENTIAL TRANSFORMER
240/110, 415/110 VOLT
SAFETY BELT WITH PROVISION FOR KEEPING TOOLS
SAFETY BELT WITH PROVISION FOR KEEPING TOOLS
SAFETY ROPE, SUITABLE SIZE
NYLON BRAIDED CORD MADE FROM HIGH TENACITY MULTIFILAMENT YARN FOR 13 MM DIA
SAFETY NET 3 X 3 METER
3X3 METER
CHAIN PULLEY BLOCK -3 TON CAPACITY- MANUAL TYPE
3 TON
TRANSFORMER SINGLE PHASE
1 K.V.A. 250/100 V
TWIZER FINE POINT
125 MM
DIGITAL MULTIMETER 4.5 DIGIT
4.5 DIGIT
TONG TESTER PORTABLE SMALL SIZE IN LEATHER CASE
Type- Portable Tong Tester (Clamp Meter), Analog Current Range- 0-10-30 A AC Voltage Range- 0-500 V AC Jaw Opening- Suitable for measuring insulated conductors up to approximately 20 mm diameter Accuracy- (+/-) 3% of Full Scale or better Meter Movement- Analog moving-coil with clear scale Construction- Rugged insulated body with insulated clamp jaws Carrying Case- Leather/Artificial Leather Carrying Case Accessories- Test leads and instruction manual Application- Suitable for electrical measurements and practical training in ITI workshops Standard- Shall conform to IS/IS/IEC 61010-1 (Safety requirements for electrical measuring equipment) and IS/IEC 61010-2-032 (Particular requirements for hand-held and hand-manipulated current sensors/clamp meters), latest editions.
REFRIGERANT R134 A CYLINDER CAP. 5 KG
Technical Specifications Refrigerant Type- R-134a (1,1,1,2-Tetrafluoroethane). Capacity- 5 kg net refrigerant filling. Purity- Minimum 99.5 Percentage pure refrigerant. Composition- Single-component HFC refrigerant. Cylinder Type- Refillable steel cylinder with corrosion-resistant coating. Cylinder Valve- Brass valve with safety cap and leak-proof sealing arrangement. Cylinder Test Pressure- Suitable for refrigerant storage and transportation as per applicable regulations. Filling- Supplied with virgin refrigerant (not recycled/recovered). Identification- Cylinder shall be marked with refrigerant type, net weight, tare weight, batch number, manufacturing date, and safety information. Application- Suitable for refrigeration and air-conditioning systems using R-134a refrigerant. Safety- Non-flammable refrigerant handling instructions and safety data sheet (SDS/MSDS) shall be provided. Standard Refrigerant shall conform to ASHRAE Standard 34 (Designation and Safety Classification of Refrigerants). Refrigerant quality shall conform to AHRI Standard 700 (Specification for Refrigerants). Cylinder shall comply with applicable requirements of ISO 4706 / PESO regulations (where applicable) for refrigerant gas cylinders. Accessories Cylinder valve cap. Safety label/marking.
MEGGER 1000 VOLTS
Technical Specifications Type- Portable Insulation Resistance Tester (Megger). Test Voltage- 1000 V DC. Insulation Resistance Range- Minimum up to 2000 M or higher. Accuracy- (+/-) 5% or better. Display- Digital display with clear reading (or equivalent high-quality analog indication). Test Function- Insulation resistance measurement with automatic discharge facility. Continuity Test- Low resistance continuity measurement facility preferred. Power Supply- Battery operated with low battery indication. Test Leads- Heavy-duty insulated test leads with safety probes and crocodile clips. Housing- Rugged, shock-resistant insulated casing suitable for workshop use. Safety Protection- Over-voltage and overload protection. Application- Suitable for testing insulation of motors, cables, transformers, electrical machines, and wiring installations. Accessories- Carrying case, test leads, batteries, and instruction manual. Standard Shall conform to IS/IEC 61557-2 (Electrical safety in low voltage distribution systems - Insulation resistance testing equipment). Safety requirements shall conform to IS/IEC 61010-1 (Safety requirements for electrical measuring equipment). Measurement category - Minimum CAT III 600 V or higher.
SERVICE OSCILLATOR
Technical Specifications Type - Function Generator / Service Oscillator. Frequency Range - Minimum 10 Hz to 1 MHz or higher. Output Waveforms - Sine wave, Square wave, and Triangle wave. Frequency Accuracy - (+/-) 1% or better. Output Amplitude - Variable output, minimum 0 to 10 V peak-to-peak (adjustable). Output Impedance - 50 Ohm (nominal). Controls - Frequency adjustment, waveform selection, amplitude control, and output control. Display - Digital frequency display preferred. Duty Cycle Control - Adjustable duty cycle facility preferred. DC Offset - Adjustable DC offset facility preferred. Power Supply - 230 V AC, 50 Hz. Construction - Rugged enclosure suitable for laboratory and workshop use. Accessories - Test leads/BNC cable, power cord, and instruction manual. Application - Suitable for testing amplifiers, oscillators, filters, communication circuits, and electronic trainer circuits. Standard Safety requirements shall conform to IS/IEC 61010-1 (Safety requirements for electrical measuring equipment). Electromagnetic compatibility shall conform to applicable IS/IEC EMC requirements. Equipment shall be calibrated before supply.
ELECTRONIC LEAK DETECTOR, ELECTRONIC LEAK DETECTOR DIGITAL TYPE CAPABLE TO DETECT OF R134A,HC,R-22
ELECTRONIC LEAK DETECTOR / ELECTRONIC LEAK DETECTOR DIGITAL TYPE CAPABLE TO DETECT OF R134A,HC,R-22 Technical Specifications Type - Digital Electronic Multi-Refrigerant Leak Detector. Refrigerant Detection Capability - Shall detect HFC refrigerants (R-134a), HCFC refrigerants (R-22), Hydrocarbon refrigerants (R-290, R-600a) Sensor Type - Advanced semiconductor sensor / heated diode sensor / equivalent high-sensitivity sensor suitable for multiple refrigerants. Sensitivity - Adjustable sensitivity with minimum detection capability of 5 g/year or better for halogen refrigerants. Leak Indication - Digital display with audible alarm and visual indication. Sensitivity Adjustment - Minimum three levels (Low/Medium/High) or continuous adjustment facility. Probe - Flexible gooseneck probe, minimum 300 mm length, for access to confined areas. Warm-up Time - Maximum 60 seconds. Response Time - Quick response with automatic reset/background compensation facility preferred. Power Supply - Rechargeable battery or replaceable batteries with low battery indication. Operating Temperature - Suitable for normal workshop/service conditions. Construction - Rugged handheld design with impact-resistant body. Application - Suitable for refrigeration, air-conditioning servicing, leak testing, and ITI practical training. Accessories - Carrying case, battery/charger (if rechargeable), spare sensor (if applicable), and instruction manual. Standard Safety requirements shall conform to IS/IEC 61010-1 (Safety requirements for electrical measuring equipment). Equipment shall be supplied with factory calibration/test certificate. The instrument shall comply with applicable refrigerant service equipment safety requirements.
MULTIMETER ANALOGUE
Technical Specifications Type - Portable Analog Multimeter with moving coil meter movement. Measurements - AC Voltage, DC Voltage, DC Current, Resistance and continuity testing. DC Voltage Ranges - Minimum up to 1000 V DC. AC Voltage Ranges - Minimum up to 750 V AC. DC Current Ranges - Minimum up to 10 A. Resistance Ranges - Multiple ranges from low ohms to minimum 1 M Ohm or higher. Accuracy - (+/-)2.5% of full scale or better. Sensitivity - Minimum 20 k Ohm/V DC (preferred). Display - Clear analog scale with mirror scale for accurate reading. Protection - Overload protection with fuse/protective circuitry. Test Leads - Heavy-duty insulated test leads with probes. Power Supply - Battery operated for resistance measurement with low battery indication preferred. Construction - Rugged shock-resistant housing suitable for workshop use. Accessories - Test leads, battery, carrying pouch/case, and instruction manual. Application - Suitable for electronics testing, troubleshooting, and practical training. Standard Safety requirements shall conform to IS/IEC 61010-1 (Safety requirements for electrical measuring equipment). Measurement category - Minimum CAT III 600 V or higher. Equipment shall be calibrated/tested before supply.
DIGITAL THERMOMETER GRADUATED DISC ANALOGY TYPE
Technical Specifications Type - Graduated dial analog thermometer with sensing probe. Temperature Range - Minimum -50 Deg Celsius to +150 Deg Celsius. Scale - Clear graduated temperature scale in Deg Celsius. Accuracy - (+/-)1 Deg Celsius to (+/-)2 Deg Celsius or better. Sensor Element - Suitable temperature sensing element (bimetallic/thermostatic type or equivalent). Probe - Stainless steel sensing probe suitable for insertion/contact measurement. Dial Size - Large, easy-to-read corrosion-resistant dial. Construction - Rugged body suitable for workshop use. Response - Quick temperature response suitable for refrigeration servicing. Application - Suitable for measuring temperature of evaporators, condensers, pipelines, and electronic/refrigeration components. Accessories - Protective cover/case and instruction manual. Workmanship - Free from defects, with clear markings and smooth operation. Standard Temperature measurement accuracy shall conform to applicable requirements of IS/IEC 60584 / equivalent temperature measurement standards, where applicable. Material and workmanship shall conform to good engineering practice.
BRUSH LESS DC MOTOR CONTROLLER
Technical Specifications Type - Permanent Magnet Brushless DC (BLDC) Motor with Electronic PWM Controller. Application - Suitable for RAC training on inverter air-conditioner outdoor/indoor fan motor drive technology. Motor Output Power - 15-30 Watt. Rated DC Supply Voltage- 315 V DC (nominal). Motor Construction - Permanent magnet rotor with three-phase stator winding. Controller Type- Dedicated BLDC electronic drive controller with PWM speed control. Speed Control- PWM (Pulse Width Modulation) based variable speed control. Speed Adjustment- Adjustable speed control through potentiometer/control input. Feedback System- Hall sensor feedback or equivalent electronic position sensing system. Commutation- Electronic commutation through controller. Protection Features - Over-current protection, Over-voltage protection, Short-circuit protection, Motor stall protection, Thermal protection. Rotation Control- Forward/reverse rotation facility preferred. Terminals- Clearly marked DC input, motor output, Hall sensor/control terminals. Construction- Compact, robust, insulated assembly suitable for repeated student demonstrations. Application- Suitable for study of inverter AC fan motor operation, BLDC drive circuit, PWM speed control, and troubleshooting practices. Accessories- BLDC motor, PWM controller, Hall sensor cable (if applicable), connecting leads, mounting arrangement, and operation manual. Standard Motor shall conform to applicable requirements of IS/IEC 60034 (Rotating Electrical Machines). Controller electrical safety shall conform to IS/IEC 61010-1 or equivalent applicable standard. Electrical insulation and protection shall be suitable for 315 V DC operation. Components shall be RoHS compliant (preferred).
AC 3 PHASE MOTOR 400V 50HZ 2 HP
Technical Specifications Type- Three Phase Squirrel Cage Induction Motor. Rated Output Power- 2 HP (approximately 1.5 kW). Rated Voltage- 400 V AC. Frequency- 50 Hz. Phase- Three Phase. Speed- Suitable standard speed (approximately 1440 RPM or 2880 RPM as applicable). Insulation Class- Class F or better. Protection Class- Minimum IP55 enclosure. Duty- Continuous duty (S1). Mounting- Foot mounted (B3) or as required for training setup. Frame- Standard industrial frame construction. Cooling- Self-cooled with external fan. Efficiency- IE2/IE3 efficiency preferred. Terminal Box- Robust terminal box with clearly marked terminals. Starting Method- Suitable for direct-on-line (DOL) starting. Construction- Robust cast aluminium/cast iron body suitable for workshop use. Application- Suitable for driving compressors, pumps, blowers, and other RAC training applications. Accessories- Motor terminal links, mounting arrangement, and instruction manual. Standard Motor shall conform to IS/IEC 60034-1 (Rotating Electrical Machines - Rating and Performance). Degree of protection shall conform to IS/IEC 60034-5. Insulation system shall conform to IS/IEC 60085. Energy efficiency shall comply with applicable IS/IEC 60034-30 requirements.
CHART STAND
Technical Specifications Type- Portable floor-mounted chart stand. Size- Approximately 6 ft height X 3 ft width. Frame Material- Mild steel/aluminium tubular frame with durable finish. Stand Construction- Rigid, stable, and suitable for regular institutional use. Base- Strong supporting base with anti-skid arrangement. Hanging Arrangement- Provided with hanging clips/clamps at top and bottom for holding charts securely. Clips- Corrosion-resistant metal clips with adequate gripping strength. Finish- Powder-coated/painted finish for protection against corrosion. Mobility- Lightweight and easy to shift (wheels preferred, if required). Application- Suitable for ITI classrooms, laboratories, workshops, and training demonstrations. Workmanship- Free from sharp edges, dents, loose joints, and manufacturing defects. Standard Material and workmanship shall conform to good engineering practice. Metal parts shall have corrosion-resistant surface treatment.
GRINDER
GRINDER -BENCH 150 MM WHEEL D.E. PEDESTAL- MOTORISED
ARGON CYLINDERS
ARGON CYLINDERS 7 CUBICMETER
Callipers outside with spring 15 cm
Callipers outside with spring 15 cm
Anvil with Stand 50 Kgs
Anvil with Stand 50 Kgs.
Clamps C 150mm
Clamps C 150mm Conforming to IS 9181-1988 standard.Body hot drop forged from high grade steel.All parts fully heat treated and black phosphated for long life.
Drift Punch Copper 15 Cm
Drift Punch Copper 15 Cm
Drill point angle gauge
Drill point angle gauge
Magnifying glass 75mm
Magnifying glass 75mm diameter with handle.
Multimeter digital
Multimeter digital DC 200mv - 500 V,0 - 10A & AC 200mv- 500V , 0-10A, resistance 0-20 M Ohm and 3 1/2 digit CE compliant/certified.
Oil Stone 15 cm x 5 cm x 2.5 cm
Oil Stone 15 cm x 5 cm x 2.5 cm
Piston ring compressor
Piston ring compressor of standard quality with L type wrench having piston ring compression range minimum from 50 to 150 mm diameter.
Piston Ring expander and remover.
Piston Ring expander and remover made of chrome-vanadium steel or hardened alloy steel and having piston ring removing and fitting range from 40 mm to 100 mm.
Portable electric drill Machine 15 mm drill bit capacity
Portable electric drill Machine having minimum 15 mm drill bit capacity.Power Input - 750 W to 850 W.Drill machine must meet standard IS 4665 certification.
Punch Letter 4mm, Number
Punch set 4mm Letter and Number made from hardened steel or chrome-vanadium (Cr-V) steel.Letter and Number Punch sets must be supplied in two seperate boxes.
Scriber with scribing black universal
Scriber with scribing block universal with Adjustable Spindle 250 mm that can be tilted to any angle, allowing to easily adjust it above or below the base level. V-Grooved Base - The base must be hardened and features a V-groove, which allows it to sit perfectly on curved or cylindrical surfaces. Fine Adjustment Screw - A knurled screw attached to a rocker arm or swivel bracket enables precise, micro-movements of the spindle and scriber tip without needing manual forcing. Guide Pins - Retractable guide pins located at the bottom of the cast-iron base can be pushed down to press against the straight edge of a Surface Plate for steady linear tracking. Versatile Clamping (Snug) - The scriber is held by a snug that allows it to swivel, be positioned at any height, or be easily replaced with a Dial Test Indicator to measure run-out.
Set of stock and dies -Metric
Set of stock and dies -Metric made of HSS 6 to 12 mm (6 mm, 8 mm, 10 mm & 12 mm) in a box.
Stud remover with socket handle
Stud remover 1/2 inch drive made from hardened and tempered steel with socket handle to remove studs having diameter ranging from 6mm to 12mm.
Thread pitch gauge Metric
Thread pitch gauge Metric made from Stainless steel having minimum thread pitch 0.25 to 4 mm measurement capacity.
Universal puller for removing pulleys, bearings
Universal puller for removing pulleys, bearings
Vacuum gauge 0 to 760 mm of Hg.
Vacuum gauge to measure 0 to 760 mm of Hg. with flexible heavy duty pipe and attachments for vaccum measurement in a box.
Valve spring compressor universal
Lever type valve Lifter suitable for 100 cc to 220 cc motor cycle cylinder head. Material - Industrial-grade hardened steel with powder coating.Anti slip grip on lever.
Wire Gauge, metric
Wire Gauge (metric ) made of Stainless Steel having measuring capacity 1 to 36 SWG.
Tool Cabinet
Tool Cabinet 6.5 FEET x 3 FEET x 1.5 FEET made from steel Grey powder coated steel sheet having minimum thickness of 1.2 mm. size and minimum 4 selves.There should be transparent doors made of minimum 5 mm thick acralyc sheet having 50 mm steel sheet boarders and locks.There should be rubber pads fitted at bottom of legs of Tool Cabinet.
Caliper odd-leg firm joint 150 mm
Caliper odd-leg firm joint 150 mm
Caliper transfer inside 150 mm
Caliper transfer inside 150 mm
Twist Drill straight shank 3 to 12 mm by 1 mm
Twist Drill straight shank 3 to 12 mm by 1 mm
Drill Twist Set Taper Shank - 14 mm to 20 mm by 1 mm
Drill Twist Set Taper Shank - 14 mm to 20 mm by 1 mm
Oil Stone 12 mm sq. x 100 long fine
Oil Stone 12 mm sq. x 100 long fine
Chisel cold flat 20 mm X 150 mm High carbon steel
Chisel cold flat 20 mm X 150 mm High carbon steel
Stud Extractor EZY - out Set of 8
Stud Extractor EZY - out Set of 8
Punch number set. 3 mm
Punch number set. 3 mm
Drill twist straight shank 3 mm to 12 mm by 0.5 mm H.S.S.
Drill twist straight shank 3 mm to 12 mm by 0.5 mm H.S.S.
Hand Reamer set Taper pin straight flute Nominal Dia. 6, 8, 10, 12, 16mm
Hand Reamer set (Taper pin straight flute) Nominal Dia. 6, 8, 10, 12, 16mm
Adjustable pipe die set
Adjustable pipe die set BSP cover pipe size 1 inch or 3/4 inch
Wing compass. 254 mm or 300 mm
Wing compass. 254 mm or 300 mm
Knurling tool, Diamond, straight and Diagonal
Knurling tool (Diamond, straight & Diagonal)
Indexable boring bar with inserts 1 inch shank
Indexable boring bar with inserts 1inch shank
Lapping plate Dia. 6 inch
Lapping plate Dia. 6 inch
Drill gauges
Drill gauges Letter drill gauge (A to Z), Number drill gauge (1 to 60), Metric drill gauge (1.5mm to 12.5mm, 30 holes)
Cast Iron Globe Valve, Flanged type 150NB
Cast Iron Globe Valve (Flanged type) 150NB, Class 150 Flange - ANSI125-B16.1
Stop cock 25NB
Stop cock 25NB (2-way, Threaded end)
Pulleys for V-belt or Flat belt to fit on 50mm dia. Shaft with key slot
Pulleys (for V-belt or Flat belt) to fit on 50mm dia. Shaft with key slot
Hollow punch Straight Shank Hollow Punch Sets 5-12mm
Hollow punch Straight Shank Hollow Punch Sets 5-12mm
Lifting sling 8mm Nominal Dia. Single leg sling
Lifting sling 8mm Nominal Dia. Single leg sling
Stake hatchet with Leg. 300 X 200 X 20 mm
Stake hatchet with Leg. 300 X 200 X 20 mm
Stake grooving. 100 X 100 X 300 mm
Stake grooving. 100 X 100 X 300 mm
Gauge snap Go and Not Go 25 to 50 mm by 5 mm, Set of 6 pieces
Gauge snap Go and Not Go 25 to 50 mm by 5 mm, Set of 6 pieces
Gauge plug Single ended 5 to 55 by 5 mm. Set of 11 pcs.
Gauge plug Single ended 5 to 55 by 5 mm. Set of 11 pcs.
Sine bar 125 mm
Sine bar 125 mm
Engineers try square knife-edge 150 mm Blade
Engineers try square (knife-edge) 150 mm Blade
Carbide Wear Block. 1 mm - 2 mm
Carbide Wear Block. 1 mm - 2 mm
Lathe tools bit. 6 mm x 75 mm
Lathe tools bit. 6 mm x 75 mm HSS/Carbide
Lathe tools bit. 8 mm x 75 mm
Lathe tools bit. 8 mm x 75 mm HSS/Carbide
Lathe tools bit. 10 mm x 75 mm
Lathe tools bit. 10 mm x 75 mm HSS/Carbide
Arm strong type tool bit holder. Straight
Arm strong type tool bit holder. Straight
Adjustable pipe chain tonge to take pipes up to 300 mm
Adjustable pipe chain tonge to take pipes up to 300 mm
Tweezers 100mm
100mm
Crimping tool
FOR RJ45,RJ 11
Power Meter
FOR FIBER OPTIC CABLE
Wireless Access Point
Frequency 5 GHz Frequency Band Dual-Band
Media Convertor
10/100Mbps,up to 20km range
Vernier caliper 150 mm
Vernier caliper 150 mm
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Contactor and auxiliary contacts | 3 PHASE, 415 VOLT, 25 A WITH 2NO AND 2NC CONTACTS | 2 | nos | maninagar_con | 15 | |
| 2 | Cut out Relays 16A, 440V | 16A, 440V | 1 | nos | maninagar_con | 15 | |
| 3 | HIGH PRESSURE SODIUM LAMP COMPLETE SET | 150W 240V | 1 | nos | maninagar_con | 15 | |
| 4 | LOW PRESSURE SODIUM LAMP COMPLETE SET | 150W 240V | 1 | nos | maninagar_con | 15 | |
| 5 | Rubber mat | 2 ft x 4ft x 1 inch (FOR ELECTRICIAN TRADE) | 2 | nos | maninagar_con | 15 | |
| 6 | Digital Multi Meter | DC 200mv -1000v, 0 - 10A and AC 200mv- 750v , 0-10A, resistance 0-20 M Ohm and 3 1/2 digit | 2 | nos | maninagar_con | 15 | |
| 7 | 4 point D.C. Starter For 2.5 KW DC motor | For 2.5 KW DC motor | 1 | nos | maninagar_con | 15 | |
| 8 | AC Starters Resistance type starter For A.C Motors of 2 to 5 H.P. | For A.C Motors of 2 to 5 H.P. | 1 | nos | maninagar_con | 15 | |
| 9 | AC Starters Star Delta Starter- Manual For A.C Motors of 2 to 5 H.P. | For A.C Motors of 2 to 5 H.P. | 1 | nos | maninagar_con | 15 | |
| 10 | AC Starters Star Delta Starter Semi automatic For A.C Motors of 2 to 5 H.P. | For A.C Motors of 2 to 5 H.P. | 1 | nos | maninagar_con | 15 | |
| 11 | AC Starters Auto Transformer type For A.C Motors of 2 to 5 H.P. | For A.C Motors of 2 to 5 H.P. | 1 | nos | maninagar_con | 15 | |
| 12 | Manual Motor coil Winding Machine With step arbor | Gear Ratio - 1 to 3 or 1 to 10 Step Arbor (Mandrels/Farma) - a set of adjustable, multi-stepped dies/dies or rectangular formers. Turn Counter - Integrated mechanical (analog) 5-digit revolution counter. Wire Gauge Compatibility - super-enamelled copper wires (SWG 16 to SWG 37) Maximum coil diameter - Up to 150 - 200 mm. Maximum coil width - 70 - 100 mm. | 1 | nos | maninagar_con | 15 | |
| 13 | DIGITAL I.C. TESTER | Power Source Battery Cell, AA Battery | 1 | nos | maninagar_con | 15 | |
| 14 | HOME THEATRE SOUND SYSTEM | 100W Power, Powerful Subwoofer, USB port, Bluetooth | 1 | nos | maninagar_con | 15 | |
| 15 | CALIPER INSIDE SPRING | CALIPER INSIDE SPRING 6 INCH / 15 CM | 64 | nos | maninagar_con | 15 | |
| 16 | CALIPER HERMACHRODITE.SPRING 15 CM | CALIPER HERMAPHRODITE SPRING 15 CM | 50 | nos | maninagar_con | 15 | |
| 17 | DIVIDER SPRING | DIVIDER SPRING 6 INCH / 15 CM | 97 | nos | maninagar_con | 15 | |
| 18 | CALIPER OUTSIDE SPRING 20 CM | CALIPER OUTSIDE SPRING 20 CM | 2 | nos | maninagar_con | 15 | |
| 19 | ANGLE PLATE SIZE 200 X 100 X 200 MM | ANGLE PLATE SIZE 200 X 100 X 200 MM | 2 | nos | maninagar_con | 15 | |
| 20 | OIL STONE UNIVERSEL SILICON CARBIDE | OIL STONE (CARBORUNDUM) UNIVERSEL SILICON CARBIDE COMBINATION ROUGH AND FINE) 150 X 50 X 25 MM | 9 | nos | maninagar_con | 15 | |
| 21 | DRILL TWIST SS NUMBER 0 TO 60 SET | DRILL TWIST S.S NUMBER 0 TO 60 SET | 2 | nos | maninagar_con | 15 | |
| 22 | TWIST DRILLS 3MM TO 13MM, PARALLEL SHANK | TWIST DRILLS 3MM TO 13MM (PARALLEL SHANK) | 1 | nos | maninagar_con | 15 | |
| 23 | GRINDING WHEEL DRESSER DIAMOND | GRINDING WHEEL DRESSER (DIAMOND) | 1 | nos | maninagar_con | 15 | |
| 24 | REAMER ADJUSTABLE 10 MM TO 15 MM IN STEPS OF 1 MM SET | REAMER ADJUSTABLE 10 MM TO 15 MM IN STEPS OF 1 MM - SET | 1 | nos | maninagar_con | 15 | |
| 25 | TOOL BIT HOLDER AS ARMSTRONG L.H. | TOOL BIT HOLDER AS ARMSTRONG L.H. | 5 | nos | maninagar_con | 15 | |
| 26 | TOOL BIT HOLDER AS ARMSTRONG R.H. | TOOL BIT HOLDER AS ARMSTRONG R.H. | 1 | nos | maninagar_con | 15 | |
| 27 | CHUCK -TABLE 75 MM JAW SWIVEL BASE 200 MM DIA | CHUCK -TABLE 75 MM JAW SWIVEL BASE 200 MM DIA. 3 JAWS WITH BOLTING ARRANGEMENT AND GRADUATED INDEGREES | 1 | nos | maninagar_con | 15 | |
| 28 | ANGLE PLATE - UNIVERSAL TABLE | ANGLE PLATE - UNIVERSAL TABLE | 1 | nos | maninagar_con | 15 | |
| 29 | KNURLING TOOL | KNURLING TOOL (DIAMOND, STRAIGHT) | 1 | nos | maninagar_con | 15 | |
| 30 | DUAL POWER SUPPLY, 230V, 50HZ, FUSE-800MA | 230V, 50HZ, FUSE-800MA | 1 | nos | maninagar_con | 15 | |
| 31 | SYNCHRONOUS MOTOR | 240V, 60RPM, CAPACITOR FOR SYNCHRONOUS MOTOR (0.8MF (+/- 5%) 450 VAC) | 1 | nos | maninagar_con | 15 | |
| 32 | POWER SUPPLY | 0-30V DC, 3A | 1 | nos | maninagar_con | 15 | |
| 33 | CUTTER SIDE AND FACE B 100 X 12 X 27 | CUTTER SIDE AND FACE B 100 X 12 X 27 | 1 | nos | maninagar_con | 15 | |
| 34 | CUTTER DOUBLE ANGLE UNEQUAL | CUTTER DOUBLE ANGLE UNEQUAL 50 X 12 BORE DIA 27 MM 55 DEG. | 2 | nos | maninagar_con | 15 | |
| 35 | CUTTER DOUBLE ANGLE UNEQUAL | CUTTER DOUBLE ANGLE UNEQUAL 63 X 18 BORE DIA 27 MM 70 DEG | 2 | nos | maninagar_con | 15 | |
| 36 | CUTTER DOUBLE ANGLE UNEQUAL | CUTTER DOUBLE ANGLE UNEQUAL 63 X 18 BORE DIA 27 MM 75 DEG | 1 | nos | maninagar_con | 15 | |
| 37 | CUTTER SHELL END MILL | CUTTER SHELL END MILL DIA. 50 MM X 36 MM WIDTH X DIA. 27 BORE | 2 | nos | maninagar_con | 15 | |
| 38 | CUTTER SHELL END MILL | CUTTER SHELL END MILL DIA. 75 MM X 50 MM WIDTH X DIA. 27 BORE | 2 | nos | maninagar_con | 15 | |
| 39 | CUTTER PARALLEL SHANK END MILLS SET | CUTTER PARALLEL SHANK END MILLS DIA 6 MM, 10 MM,16 MM SET DOUBLE FLUTED | 4 | nos | maninagar_con | 15 | |
| 40 | CUTTER T SLOT WITH PARALLEL SHANK | CUTTER T SLOT WITH PARALLEL SHANK - CUTTER DIA. 17.5 X 8 MM WIDTH X DIA. OF SHANK 8 MM | 2 | nos | maninagar_con | 15 | |
| 41 | IVOLUTE MILLING CUTTER 2 MODULE | IVOLUTE MILLING CUTTER 2 MODULE | 1 | nos | maninagar_con | 15 | |
| 42 | TAPER GAUGE M.T.NO. 1,2,3,4 and 5 | TAPER GAUGE M.T.NO. 1,2,3,4 & 5 | 1 | nos | maninagar_con | 15 | |
| 43 | PLANER GAUGE STANDARD SIZE | PLANER GAUGE STANDARD SIZE | 1 | nos | maninagar_con | 15 | |
| 44 | GRINDER WITH TWO 18 CM WHEELS | GRINDER WITH TWO 18 CM WHEELS WITH TWIST DRILL GRINDING ATTACHMENT. | 1 | nos | maninagar_con | 15 | |
| 45 | AC alternator slip ring puller, Variable | AC Alternator slip ring puller made from hardened and tempered steel for removing alternator slip rings having outside diameter ranging between 25 to 50 mm. | 1 | nos | maninagar_con | 15 | |
| 46 | Engineers stethoscope | Engineers Stethoscope -Mechanical-Hollow Tube type having a super-thin diaphragm and hollow Stainless steel probe of minimum 200 mm length that securely amplifies noises and isolates the exact location of low decible noise. | 1 | nos | maninagar_con | 15 | |
| 47 | Stud extractors | Stud extractor set of 3 made of high carbon steel and size 5 mm, 6 mm and 8 mm in a box. | 3 | nos | maninagar_con | 15 | |
| 48 | De-soldering pump | 40 W | 26 | nos | maninagar_con | 15 | |
| 49 | Rubber mat, 180x45x2.5 cm | 180x45x2.5 cm | 2 | nos | maninagar_con | 15 | |
| 50 | Signal tracer | Input Impedance - High impedance (typically above 50K Ohm),Gain & Sensitivity - Approximately 40dB ,Output - Built-in speaker (often 0.5W at 8 Ohm),Power Supply - Ranges from 9V | 2 | nos | maninagar_con | 15 | |
| 51 | Conductivity meter | Material - Mild Steel, Conductivity Range-1000 mS/cm, Light Source-LED, Display Type3 1/2 DIGIT LED DISPLAY | 1 | nos | maninagar_con | 15 | |
| 52 | Needle destroyer | 220-250V AC Supply 50-60Hz. Low Power Consumption. | 1 | nos | maninagar_con | 15 | |
| 53 | Oxygen concentration | POWER CONSUMPTION 610 WATTS | 1 | nos | maninagar_con | 15 | |
| 54 | Flow meter | Poly Carbonate Material, Analog Display Type | 1 | nos | maninagar_con | 15 | |
| 55 | Colorimeter | 8 Digital Filters, 405-700 nm Wavelength Range, 1ml Sample Volume | 1 | nos | maninagar_con | 15 | |
| 56 | SOUND SYSTEM | 2.1 | 1 | nos | maninagar_con | 15 | |
| 57 | PATCH PANEL 24 PORT | 24 Port | 3 | nos | maninagar_con | 15 | |
| 58 | PLUMB BOB 115 GRAMS | 115 GRAMS | 12 | nos | maninagar_con | 15 | |
| 59 | SINGLE PHASE ENERGY METER | SOLID STATE SOLAR BASE (BIDIRECTIONAL) 5-30AMP,240V | 1 | nos | maninagar_con | 15 | |
| 60 | FLUX METER 0-500 tesla | 0-500 tesla | 1 | nos | maninagar_con | 15 | |
| 61 | RUBBER MAT 2 METERS X 1 METER X 9 MM | 2 METERS X 1 METER X 9 MM | 2 | nos | maninagar_con | 15 | |
| 62 | RECHARGEABLE BATTERY 12V,100AH | 12V,100AH | 1 | nos | maninagar_con | 15 | |
| 63 | RECHARGEABLE BATTERY RECHARGEABLE BATTERY 6V,7AH | 6V,7AH | 1 | nos | maninagar_con | 15 | |
| 64 | SOLAR CHARGE CONTROLLER | SOLAR CHARGE CONTROLLER WITH MANUAL SWITCH ( DAY LIGHTING) 6 V ,5 A | 1 | nos | maninagar_con | 15 | |
| 65 | TABLE FOR DEMONSTRATION 2.5 X 1.20 X 0.75 METERS | 2.5 X 1.20 X 0.75 METERS | 1 | nos | maninagar_con | 15 | |
| 66 | PROTRACTER CELLULOID CEMICIRCULAR 15 cm semi- circular. | PROTRACTER CELLULOID CEMICIRCULAR 15 cm semi- circular. | 12 | nos | maninagar_con | 15 | |
| 67 | SURVEY PLOTTING SCALES WITH OFFSET BITS | SURVEY PLOTTING SCALES WITH OFFSET BITS (6 IN ONE SET) 30 cms long withoffset scales. | 12 | nos | maninagar_con | 15 | |
| 68 | SET SQUARE CELLULIOD 45 DEGREE | SET SQUARE CELLULIOD 45 DEGREE -8 INCH 20 cm, 2 mm thick with bevelled edges 45 degree . | 12 | nos | maninagar_con | 15 | |
| 69 | SET SQUARE 30 - 60 DEGREE IS 1561 | SET SQUARE 30 - 60 DEGREE (250X1.5 M.M.) IS 1561 25 cm, 2mm thick with bevelled edges60 degrees. | 8 | nos | maninagar_con | 15 | |
| 70 | MINI DRAFTER 750mm | MINI DRAFTER 750mm/Mini drafter/ Parallel Bar | 12 | nos | maninagar_con | 15 | |
| 71 | RANGING RODS WOODEN FITTED WITH IRON SHOE 2METERS LONG. | RANGING RODS WOODEN FITTED WITH IRON SHOE 2METERS LONG. | 4 | nos | maninagar_con | 15 | |
| 72 | WOODEN PEGS | AS PER STANDARD SIZE | 1 | nos | maninagar_con | 15 | |
| 73 | PRISMATIC COMPASS WITH STAND 110 mm dia. | PRISMATIC COMPASS WITH STAND 110 mm dia. | 1 | nos | maninagar_con | 15 | |
| 74 | TABLE FOR SERVER, PRINTER, SCANNER 650 X 500 X 750 MM | TABLE FOR SERVER/PRINTER/SCANNER 650 X 500 X 750 MM | 1 | nos | maninagar_con | 15 | |
| 75 | Drawing table 750mm X 550mm | Drawing table 750mm X 550mm | 3 | nos | maninagar_con | 15 | |
| 76 | DRAWING BOARD | Drawing Board 750mm X 550mm | 7 | nos | maninagar_con | 15 | |
| 77 | BRADAWL | 1/4 INCH | 26 | nos | maninagar_con | 15 | |
| 78 | 1 PHASE CEILING FAN 900 Mm | 1 PHASE 900 MM | 1 | nos | maninagar_con | 15 | |
| 79 | 1 PHASE CEILING FAN 1200 mM | 1 PHASE 1200 MM | 1 | nos | maninagar_con | 15 | |
| 80 | 1 PHASE CEILING FAN 1400 mM | 1 PHASE 1400 MM | 2 | nos | maninagar_con | 15 | |
| 81 | SEMI AUTOMATIC STAR DELTA STARTER FOR AC MOTOR | 7.5 HP 415 V, 3-Phase, 50 Hz AC supply. | 1 | nos | maninagar_con | 15 | |
| 82 | 2 POINT STARER FOR D.C.MOTOR | 3 HP 220 V | 1 | nos | maninagar_con | 15 | |
| 83 | 4 POINT STARER FOR D.C.MOTOR | 3 HP 220 V | 1 | nos | maninagar_con | 15 | |
| 84 | SINGLE PHASE PREVENTER | 415 VOLT | 1 | nos | maninagar_con | 15 | |
| 85 | DIGITAL MULTIMETER | DC 200mv -1000v, 0 - 10A & AC 200mv- 750v , 0-10A, resistance 0-20 M Ohm and 3 1/2 digit | 9 | nos | maninagar_con | 15 | |
| 86 | CLIPON METER 0-100 A | 0-100 A | 2 | nos | maninagar_con | 15 | |
| 87 | EARTH TESTER 10000 Ohm | 10000 Ohm | 1 | nos | maninagar_con | 15 | |
| 88 | S.W.G. Wire GAUGE | Wire Gauge - Metric | 3 | nos | maninagar_con | 15 | |
| 89 | WATER LEVEL CONTROLLER | 415 V | 1 | nos | maninagar_con | 15 | |
| 90 | PULLEY PULLER WITH 3 LEGS 150MM, 300MM | 150MM, 300MM | 1 | nos | maninagar_con | 15 | |
| 91 | ELECTRICAL DRILL PORTABLE 0-12MM, 750W | 0-12MM, 750W | 1 | nos | maninagar_con | 15 | |
| 92 | STATER CORE FOR 3 PHASE SQUIRREL CAGE INDUCTION MOTOR 24 SLOT | 3 PHASE SQUIRREL CAGE INDUCTION MOTOR 24 SLOT | 2 | nos | maninagar_con | 15 | |
| 93 | STATER CORE FOR 3 PHASE SQUIRREL CAGE INDUCTION MOTOR 36 SLOT | 3 PHASE SQUIRREL CAGE INDUCTION MOTOR 36 SLOT | 2 | nos | maninagar_con | 15 | |
| 94 | OPEN WELL MOTOR 1 HP, 230V, 1440 RPM 1 PHASE | 1 HP, 230V, 1440 RPM 1 PHASE | 1 | nos | maninagar_con | 15 | |
| 95 | OPEN WELL MOTOR 3 HP, 440V, 1440 RPM 3 PHASE | 3 HP, 440V, 1440 RPM 3 PHASE | 1 | nos | maninagar_con | 15 | |
| 96 | SUBMERCIBLE PUMP 2 HP,440V, 3 PHASE | 2 HP,440V, 3 PHASE | 1 | nos | maninagar_con | 15 | |
| 97 | SUBMERCIBLE PUMP 1 HP,230V, 1 PHASE | 1 HP,230V, 1 PHASE | 1 | nos | maninagar_con | 15 | |
| 98 | MOTOR PUMP SET 1 HP, 230V, 1 PHASE | 1 HP, 230V, 1 PHASE | 1 | nos | maninagar_con | 15 | |
| 99 | SMALL PLASTIC BOWLS 6 inch DIAMETER | 6 INCH DIAMETER | 24 | nos | maninagar_con | 15 | |
| 100 | PACK AND BLEACH BRUSH | length - 16 cm ,width - 3cm | 24 | nos | maninagar_con | 15 | |
| 101 | PADDLE BRUSH | Length - 24 cm to 28 cm Width - 7 cm to 9 cm ,ball tipped nylon pins static bristles. | 24 | nos | maninagar_con | 15 | |
| 102 | DYE BRUSH | Synthetic water based ,Width - 1 to 2.5 inch ,3 to 4 inch | 24 | nos | maninagar_con | 15 | |
| 103 | FIRST AID KIT | Medium size metalic box min size - 32.5x28.5x8 cm wall mountable | 2 | nos | maninagar_con | 15 | |
| 104 | PROFESSIONAL HAIRBRUSHES SET | Round Brush Size - 25mm to 53 mm,Barrel | 12 | nos | maninagar_con | 15 | |
| 105 | CRIMPER | Micro crimper 1/2 inch to 3/4 inch wide, Heat range- High quality crimper operate between 150 Celsius to 230 Celsius PTC or MCH heaters auto cut off dual voltage facility | 9 | nos | maninagar_con | 15 | |
| 106 | WAX HEATER | Power - 80W to 100W, 220V to 240V, 45C to 120c thermostat ranging, capacities 4000ml to 500ml, key Features auto cut off for safety & non Stick aluminum removable pots | 2 | nos | maninagar_con | 15 | |
| 107 | PEDI SPA TUB | include a 22 to 28 - liter water capacity, dimensions around 24 inch X 20 inch X 15 inch, and a durable fiberglass or acrylic shell. | 1 | nos | maninagar_con | 15 | |
| 108 | YOGA MAT | 1. Dimensions Standard - 68 inch X 24 inch (173 cm X 61 cm) - Best for average-height individuals Long & Wide - 72 inch 84 inch length X 26 inch - 36 inch width Provides extra space so your head and feet stay on the mat. Travel Folds flat and weighs under 1 kg. 2. Thickness- 1.5 mm to 3 mm, Ultra-lightweight and portable. Best for travel, hot yoga, or strong ground connection during Ashtanga 4 mm to 5 mm, Industry standard. Offers a perfect balance of joint cushioning and stability for balancing poses in Vinyasa and Hatha yoga 6 mm to 10 mm, Ideal for joint pain, restorative, or Yin yoga. Provides maximum cushioning but can make balancing poses more challenging. 3. Materials TPE (Thermoplastic Elastomer) Eco-friendly, lightweight, and recyclable. Features great grip, tear resistance, and moderate cushioning. Natural Rubber - Best grip/traction, eco-friendly, but heavier and prone to degrading in direct sunlight. PVC - Highly durable and provides excellent sticky grip, but contains synthetic chemicals and is not biodegradable. PU (Polyurethane), Exceptional wet/sweat grip for hot yoga, though it requires more maintenance. EVA / NBR, Affordable and lightweight, but less dense and prone to flattening over time. 4. Texture and Grip Open-Cell - Acts like a sponge to absorb sweat. Excellent for hot yoga.Closed-Cell - Does not absorb sweat. Easier to clean, but can become slippery when wet. Textured patterns enhance surface friction | 4 | nos | maninagar_con | 15 | |
| 109 | THIMBLES | AS PER AVAILABLE IN MARKET | 42 | nos | maninagar_con | 15 | |
| 110 | FRENCH CURVE | AS PER AVAILABLE IN MARKET | 12 | nos | maninagar_con | 15 | |
| 111 | THREAD CUTTER | AS PER AVAILABLE IN MARKET | 42 | nos | maninagar_con | 15 | |
| 112 | LEG SHAPER | AS PER AVAILABLE IN MARKET | 3 | nos | maninagar_con | 15 | |
| 113 | GARMNET HANGERS | WOODEN SUIT HANGERS | 21 | nos | maninagar_con | 15 | |
| 114 | Digital Still Camera High resolution amateur camera | High resolution amateur camera | 1 | nos | maninagar_con | 15 | |
| 115 | D.C. COMPOUND MOTOR 3 H.P. 250 V | WITH 4 POINT STARTER AND FIELD REGULATOR(LABORATORY TYPE) | 1 | nos | maninagar_con | 15 | |
| 116 | ELEVATOR ROPE CUTTER UP TO 32 MM | UP TO 32 MM | 2 | nos | maninagar_con | 15 | |
| 117 | RAIL ALIGNMENT GAUGE | 330MM | 2 | nos | maninagar_con | 15 | |
| 118 | ELECTROMAGNET BREAK ASSEMBLY | BRAKE SIZE - 250 MM, COIL VOLTAGE -220 V AC , BRAKE TYPE - AC FAIL SAFE | 1 | nos | maninagar_con | 15 | |
| 119 | CONTROL TRANSFORMER | SINGLE PHASE 250 W WITH 12V, 24V, 48V, 110V AND 240V TAPPING | 1 | nos | maninagar_con | 15 | |
| 120 | POTENTIAL TRANSFORMER | 240/110, 415/110 VOLT | 1 | nos | maninagar_con | 15 | |
| 121 | SAFETY BELT WITH PROVISION FOR KEEPING TOOLS | SAFETY BELT WITH PROVISION FOR KEEPING TOOLS | 4 | nos | maninagar_con | 15 | |
| 122 | SAFETY ROPE, SUITABLE SIZE | NYLON BRAIDED CORD MADE FROM HIGH TENACITY MULTIFILAMENT YARN FOR 13 MM DIA | 4 | nos | maninagar_con | 15 | |
| 123 | SAFETY NET 3 X 3 METER | 3X3 METER | 2 | nos | maninagar_con | 15 | |
| 124 | CHAIN PULLEY BLOCK -3 TON CAPACITY- MANUAL TYPE | 3 TON | 1 | nos | maninagar_con | 15 | |
| 125 | TRANSFORMER SINGLE PHASE | 1 K.V.A. 250/100 V | 1 | nos | maninagar_con | 15 | |
| 126 | TWIZER FINE POINT | 125 MM | 1 | nos | maninagar_con | 15 | |
| 127 | DIGITAL MULTIMETER 4.5 DIGIT | 4.5 DIGIT | 1 | nos | maninagar_con | 15 | |
| 128 | TONG TESTER PORTABLE SMALL SIZE IN LEATHER CASE | Type- Portable Tong Tester (Clamp Meter), Analog Current Range- 0-10-30 A AC Voltage Range- 0-500 V AC Jaw Opening- Suitable for measuring insulated conductors up to approximately 20 mm diameter Accuracy- (+/-) 3% of Full Scale or better Meter Movement- Analog moving-coil with clear scale Construction- Rugged insulated body with insulated clamp jaws Carrying Case- Leather/Artificial Leather Carrying Case Accessories- Test leads and instruction manual Application- Suitable for electrical measurements and practical training in ITI workshops Standard- Shall conform to IS/IS/IEC 61010-1 (Safety requirements for electrical measuring equipment) and IS/IEC 61010-2-032 (Particular requirements for hand-held and hand-manipulated current sensors/clamp meters), latest editions. | 2 | nos | maninagar_con | 15 | |
| 129 | REFRIGERANT R134 A CYLINDER CAP. 5 KG | Technical Specifications Refrigerant Type- R-134a (1,1,1,2-Tetrafluoroethane). Capacity- 5 kg net refrigerant filling. Purity- Minimum 99.5 Percentage pure refrigerant. Composition- Single-component HFC refrigerant. Cylinder Type- Refillable steel cylinder with corrosion-resistant coating. Cylinder Valve- Brass valve with safety cap and leak-proof sealing arrangement. Cylinder Test Pressure- Suitable for refrigerant storage and transportation as per applicable regulations. Filling- Supplied with virgin refrigerant (not recycled/recovered). Identification- Cylinder shall be marked with refrigerant type, net weight, tare weight, batch number, manufacturing date, and safety information. Application- Suitable for refrigeration and air-conditioning systems using R-134a refrigerant. Safety- Non-flammable refrigerant handling instructions and safety data sheet (SDS/MSDS) shall be provided. Standard Refrigerant shall conform to ASHRAE Standard 34 (Designation and Safety Classification of Refrigerants). Refrigerant quality shall conform to AHRI Standard 700 (Specification for Refrigerants). Cylinder shall comply with applicable requirements of ISO 4706 / PESO regulations (where applicable) for refrigerant gas cylinders. Accessories Cylinder valve cap. Safety label/marking. | 1 | nos | maninagar_con | 15 | |
| 130 | MEGGER 1000 VOLTS | Technical Specifications Type- Portable Insulation Resistance Tester (Megger). Test Voltage- 1000 V DC. Insulation Resistance Range- Minimum up to 2000 M or higher. Accuracy- (+/-) 5% or better. Display- Digital display with clear reading (or equivalent high-quality analog indication). Test Function- Insulation resistance measurement with automatic discharge facility. Continuity Test- Low resistance continuity measurement facility preferred. Power Supply- Battery operated with low battery indication. Test Leads- Heavy-duty insulated test leads with safety probes and crocodile clips. Housing- Rugged, shock-resistant insulated casing suitable for workshop use. Safety Protection- Over-voltage and overload protection. Application- Suitable for testing insulation of motors, cables, transformers, electrical machines, and wiring installations. Accessories- Carrying case, test leads, batteries, and instruction manual. Standard Shall conform to IS/IEC 61557-2 (Electrical safety in low voltage distribution systems - Insulation resistance testing equipment). Safety requirements shall conform to IS/IEC 61010-1 (Safety requirements for electrical measuring equipment). Measurement category - Minimum CAT III 600 V or higher. | 1 | nos | maninagar_con | 15 | |
| 131 | SERVICE OSCILLATOR | Technical Specifications Type - Function Generator / Service Oscillator. Frequency Range - Minimum 10 Hz to 1 MHz or higher. Output Waveforms - Sine wave, Square wave, and Triangle wave. Frequency Accuracy - (+/-) 1% or better. Output Amplitude - Variable output, minimum 0 to 10 V peak-to-peak (adjustable). Output Impedance - 50 Ohm (nominal). Controls - Frequency adjustment, waveform selection, amplitude control, and output control. Display - Digital frequency display preferred. Duty Cycle Control - Adjustable duty cycle facility preferred. DC Offset - Adjustable DC offset facility preferred. Power Supply - 230 V AC, 50 Hz. Construction - Rugged enclosure suitable for laboratory and workshop use. Accessories - Test leads/BNC cable, power cord, and instruction manual. Application - Suitable for testing amplifiers, oscillators, filters, communication circuits, and electronic trainer circuits. Standard Safety requirements shall conform to IS/IEC 61010-1 (Safety requirements for electrical measuring equipment). Electromagnetic compatibility shall conform to applicable IS/IEC EMC requirements. Equipment shall be calibrated before supply. | 1 | nos | maninagar_con | 15 | |
| 132 | ELECTRONIC LEAK DETECTOR, ELECTRONIC LEAK DETECTOR DIGITAL TYPE CAPABLE TO DETECT OF R134A,HC,R-22 | ELECTRONIC LEAK DETECTOR / ELECTRONIC LEAK DETECTOR DIGITAL TYPE CAPABLE TO DETECT OF R134A,HC,R-22 Technical Specifications Type - Digital Electronic Multi-Refrigerant Leak Detector. Refrigerant Detection Capability - Shall detect HFC refrigerants (R-134a), HCFC refrigerants (R-22), Hydrocarbon refrigerants (R-290, R-600a) Sensor Type - Advanced semiconductor sensor / heated diode sensor / equivalent high-sensitivity sensor suitable for multiple refrigerants. Sensitivity - Adjustable sensitivity with minimum detection capability of 5 g/year or better for halogen refrigerants. Leak Indication - Digital display with audible alarm and visual indication. Sensitivity Adjustment - Minimum three levels (Low/Medium/High) or continuous adjustment facility. Probe - Flexible gooseneck probe, minimum 300 mm length, for access to confined areas. Warm-up Time - Maximum 60 seconds. Response Time - Quick response with automatic reset/background compensation facility preferred. Power Supply - Rechargeable battery or replaceable batteries with low battery indication. Operating Temperature - Suitable for normal workshop/service conditions. Construction - Rugged handheld design with impact-resistant body. Application - Suitable for refrigeration, air-conditioning servicing, leak testing, and ITI practical training. Accessories - Carrying case, battery/charger (if rechargeable), spare sensor (if applicable), and instruction manual. Standard Safety requirements shall conform to IS/IEC 61010-1 (Safety requirements for electrical measuring equipment). Equipment shall be supplied with factory calibration/test certificate. The instrument shall comply with applicable refrigerant service equipment safety requirements. | 2 | nos | maninagar_con | 15 | |
| 133 | MULTIMETER ANALOGUE | Technical Specifications Type - Portable Analog Multimeter with moving coil meter movement. Measurements - AC Voltage, DC Voltage, DC Current, Resistance and continuity testing. DC Voltage Ranges - Minimum up to 1000 V DC. AC Voltage Ranges - Minimum up to 750 V AC. DC Current Ranges - Minimum up to 10 A. Resistance Ranges - Multiple ranges from low ohms to minimum 1 M Ohm or higher. Accuracy - (+/-)2.5% of full scale or better. Sensitivity - Minimum 20 k Ohm/V DC (preferred). Display - Clear analog scale with mirror scale for accurate reading. Protection - Overload protection with fuse/protective circuitry. Test Leads - Heavy-duty insulated test leads with probes. Power Supply - Battery operated for resistance measurement with low battery indication preferred. Construction - Rugged shock-resistant housing suitable for workshop use. Accessories - Test leads, battery, carrying pouch/case, and instruction manual. Application - Suitable for electronics testing, troubleshooting, and practical training. Standard Safety requirements shall conform to IS/IEC 61010-1 (Safety requirements for electrical measuring equipment). Measurement category - Minimum CAT III 600 V or higher. Equipment shall be calibrated/tested before supply. | 1 | nos | maninagar_con | 15 | |
| 134 | DIGITAL THERMOMETER GRADUATED DISC ANALOGY TYPE | Technical Specifications Type - Graduated dial analog thermometer with sensing probe. Temperature Range - Minimum -50 Deg Celsius to +150 Deg Celsius. Scale - Clear graduated temperature scale in Deg Celsius. Accuracy - (+/-)1 Deg Celsius to (+/-)2 Deg Celsius or better. Sensor Element - Suitable temperature sensing element (bimetallic/thermostatic type or equivalent). Probe - Stainless steel sensing probe suitable for insertion/contact measurement. Dial Size - Large, easy-to-read corrosion-resistant dial. Construction - Rugged body suitable for workshop use. Response - Quick temperature response suitable for refrigeration servicing. Application - Suitable for measuring temperature of evaporators, condensers, pipelines, and electronic/refrigeration components. Accessories - Protective cover/case and instruction manual. Workmanship - Free from defects, with clear markings and smooth operation. Standard Temperature measurement accuracy shall conform to applicable requirements of IS/IEC 60584 / equivalent temperature measurement standards, where applicable. Material and workmanship shall conform to good engineering practice. | 1 | nos | maninagar_con | 15 | |
| 135 | BRUSH LESS DC MOTOR CONTROLLER | Technical Specifications Type - Permanent Magnet Brushless DC (BLDC) Motor with Electronic PWM Controller. Application - Suitable for RAC training on inverter air-conditioner outdoor/indoor fan motor drive technology. Motor Output Power - 15-30 Watt. Rated DC Supply Voltage- 315 V DC (nominal). Motor Construction - Permanent magnet rotor with three-phase stator winding. Controller Type- Dedicated BLDC electronic drive controller with PWM speed control. Speed Control- PWM (Pulse Width Modulation) based variable speed control. Speed Adjustment- Adjustable speed control through potentiometer/control input. Feedback System- Hall sensor feedback or equivalent electronic position sensing system. Commutation- Electronic commutation through controller. Protection Features - Over-current protection, Over-voltage protection, Short-circuit protection, Motor stall protection, Thermal protection. Rotation Control- Forward/reverse rotation facility preferred. Terminals- Clearly marked DC input, motor output, Hall sensor/control terminals. Construction- Compact, robust, insulated assembly suitable for repeated student demonstrations. Application- Suitable for study of inverter AC fan motor operation, BLDC drive circuit, PWM speed control, and troubleshooting practices. Accessories- BLDC motor, PWM controller, Hall sensor cable (if applicable), connecting leads, mounting arrangement, and operation manual. Standard Motor shall conform to applicable requirements of IS/IEC 60034 (Rotating Electrical Machines). Controller electrical safety shall conform to IS/IEC 61010-1 or equivalent applicable standard. Electrical insulation and protection shall be suitable for 315 V DC operation. Components shall be RoHS compliant (preferred). | 2 | nos | maninagar_con | 15 | |
| 136 | AC 3 PHASE MOTOR 400V 50HZ 2 HP | Technical Specifications Type- Three Phase Squirrel Cage Induction Motor. Rated Output Power- 2 HP (approximately 1.5 kW). Rated Voltage- 400 V AC. Frequency- 50 Hz. Phase- Three Phase. Speed- Suitable standard speed (approximately 1440 RPM or 2880 RPM as applicable). Insulation Class- Class F or better. Protection Class- Minimum IP55 enclosure. Duty- Continuous duty (S1). Mounting- Foot mounted (B3) or as required for training setup. Frame- Standard industrial frame construction. Cooling- Self-cooled with external fan. Efficiency- IE2/IE3 efficiency preferred. Terminal Box- Robust terminal box with clearly marked terminals. Starting Method- Suitable for direct-on-line (DOL) starting. Construction- Robust cast aluminium/cast iron body suitable for workshop use. Application- Suitable for driving compressors, pumps, blowers, and other RAC training applications. Accessories- Motor terminal links, mounting arrangement, and instruction manual. Standard Motor shall conform to IS/IEC 60034-1 (Rotating Electrical Machines - Rating and Performance). Degree of protection shall conform to IS/IEC 60034-5. Insulation system shall conform to IS/IEC 60085. Energy efficiency shall comply with applicable IS/IEC 60034-30 requirements. | 1 | nos | maninagar_con | 15 | |
| 137 | CHART STAND | Technical Specifications Type- Portable floor-mounted chart stand. Size- Approximately 6 ft height X 3 ft width. Frame Material- Mild steel/aluminium tubular frame with durable finish. Stand Construction- Rigid, stable, and suitable for regular institutional use. Base- Strong supporting base with anti-skid arrangement. Hanging Arrangement- Provided with hanging clips/clamps at top and bottom for holding charts securely. Clips- Corrosion-resistant metal clips with adequate gripping strength. Finish- Powder-coated/painted finish for protection against corrosion. Mobility- Lightweight and easy to shift (wheels preferred, if required). Application- Suitable for ITI classrooms, laboratories, workshops, and training demonstrations. Workmanship- Free from sharp edges, dents, loose joints, and manufacturing defects. Standard Material and workmanship shall conform to good engineering practice. Metal parts shall have corrosion-resistant surface treatment. | 1 | nos | maninagar_con | 15 | |
| 138 | GRINDER | GRINDER -BENCH 150 MM WHEEL D.E. PEDESTAL- MOTORISED | 1 | nos | maninagar_con | 15 | |
| 139 | ARGON CYLINDERS | ARGON CYLINDERS 7 CUBICMETER | 1 | nos | maninagar_con | 15 | |
| 140 | Callipers outside with spring 15 cm | Callipers outside with spring 15 cm | 66 | nos | maninagar_con | 15 | |
| 141 | Anvil with Stand 50 Kgs | Anvil with Stand 50 Kgs. | 1 | nos | maninagar_con | 15 | |
| 142 | Clamps C 150mm | Clamps C 150mm Conforming to IS 9181-1988 standard.Body hot drop forged from high grade steel.All parts fully heat treated and black phosphated for long life. | 1 | nos | maninagar_con | 15 | |
| 143 | Drift Punch Copper 15 Cm | Drift Punch Copper 15 Cm | 6 | nos | maninagar_con | 15 | |
| 144 | Drill point angle gauge | Drill point angle gauge | 6 | nos | maninagar_con | 15 | |
| 145 | Magnifying glass 75mm | Magnifying glass 75mm diameter with handle. | 1 | nos | maninagar_con | 15 | |
| 146 | Multimeter digital | Multimeter digital DC 200mv - 500 V,0 - 10A & AC 200mv- 500V , 0-10A, resistance 0-20 M Ohm and 3 1/2 digit CE compliant/certified. | 2 | nos | maninagar_con | 15 | |
| 147 | Oil Stone 15 cm x 5 cm x 2.5 cm | Oil Stone 15 cm x 5 cm x 2.5 cm | 6 | nos | maninagar_con | 15 | |
| 148 | Piston ring compressor | Piston ring compressor of standard quality with L type wrench having piston ring compression range minimum from 50 to 150 mm diameter. | 3 | nos | maninagar_con | 15 | |
| 149 | Piston Ring expander and remover. | Piston Ring expander and remover made of chrome-vanadium steel or hardened alloy steel and having piston ring removing and fitting range from 40 mm to 100 mm. | 1 | nos | maninagar_con | 15 | |
| 150 | Portable electric drill Machine 15 mm drill bit capacity | Portable electric drill Machine having minimum 15 mm drill bit capacity.Power Input - 750 W to 850 W.Drill machine must meet standard IS 4665 certification. | 1 | nos | maninagar_con | 15 | |
| 151 | Punch Letter 4mm, Number | Punch set 4mm Letter and Number made from hardened steel or chrome-vanadium (Cr-V) steel.Letter and Number Punch sets must be supplied in two seperate boxes. | 2 | nos | maninagar_con | 15 | |
| 152 | Scriber with scribing black universal | Scriber with scribing block universal with Adjustable Spindle 250 mm that can be tilted to any angle, allowing to easily adjust it above or below the base level. V-Grooved Base - The base must be hardened and features a V-groove, which allows it to sit perfectly on curved or cylindrical surfaces. Fine Adjustment Screw - A knurled screw attached to a rocker arm or swivel bracket enables precise, micro-movements of the spindle and scriber tip without needing manual forcing. Guide Pins - Retractable guide pins located at the bottom of the cast-iron base can be pushed down to press against the straight edge of a Surface Plate for steady linear tracking. Versatile Clamping (Snug) - The scriber is held by a snug that allows it to swivel, be positioned at any height, or be easily replaced with a Dial Test Indicator to measure run-out. | 4 | nos | maninagar_con | 15 | |
| 153 | Set of stock and dies -Metric | Set of stock and dies -Metric made of HSS 6 to 12 mm (6 mm, 8 mm, 10 mm & 12 mm) in a box. | 2 | nos | maninagar_con | 15 | |
| 154 | Stud remover with socket handle | Stud remover 1/2 inch drive made from hardened and tempered steel with socket handle to remove studs having diameter ranging from 6mm to 12mm. | 1 | nos | maninagar_con | 15 | |
| 155 | Thread pitch gauge Metric | Thread pitch gauge Metric made from Stainless steel having minimum thread pitch 0.25 to 4 mm measurement capacity. | 2 | nos | maninagar_con | 15 | |
| 156 | Universal puller for removing pulleys, bearings | Universal puller for removing pulleys, bearings | 2 | nos | maninagar_con | 15 | |
| 157 | Vacuum gauge 0 to 760 mm of Hg. | Vacuum gauge to measure 0 to 760 mm of Hg. with flexible heavy duty pipe and attachments for vaccum measurement in a box. | 2 | nos | maninagar_con | 15 | |
| 158 | Valve spring compressor universal | Lever type valve Lifter suitable for 100 cc to 220 cc motor cycle cylinder head. Material - Industrial-grade hardened steel with powder coating.Anti slip grip on lever. | 1 | nos | maninagar_con | 15 | |
| 159 | Wire Gauge, metric | Wire Gauge (metric ) made of Stainless Steel having measuring capacity 1 to 36 SWG. | 1 | nos | maninagar_con | 15 | |
| 160 | Tool Cabinet | Tool Cabinet 6.5 FEET x 3 FEET x 1.5 FEET made from steel Grey powder coated steel sheet having minimum thickness of 1.2 mm. size and minimum 4 selves.There should be transparent doors made of minimum 5 mm thick acralyc sheet having 50 mm steel sheet boarders and locks.There should be rubber pads fitted at bottom of legs of Tool Cabinet. | 2 | nos | maninagar_con | 15 | |
| 161 | Caliper odd-leg firm joint 150 mm | Caliper odd-leg firm joint 150 mm | 13 | nos | maninagar_con | 15 | |
| 162 | Caliper transfer inside 150 mm | Caliper transfer inside 150 mm | 3 | nos | maninagar_con | 15 | |
| 163 | Twist Drill straight shank 3 to 12 mm by 1 mm | Twist Drill straight shank 3 to 12 mm by 1 mm | 1 | nos | maninagar_con | 15 | |
| 164 | Drill Twist Set Taper Shank - 14 mm to 20 mm by 1 mm | Drill Twist Set Taper Shank - 14 mm to 20 mm by 1 mm | 1 | nos | maninagar_con | 15 | |
| 165 | Oil Stone 12 mm sq. x 100 long fine | Oil Stone 12 mm sq. x 100 long fine | 12 | nos | maninagar_con | 15 | |
| 166 | Chisel cold flat 20 mm X 150 mm High carbon steel | Chisel cold flat 20 mm X 150 mm High carbon steel | 4 | nos | maninagar_con | 15 | |
| 167 | Stud Extractor EZY - out Set of 8 | Stud Extractor EZY - out Set of 8 | 2 | nos | maninagar_con | 15 | |
| 168 | Punch number set. 3 mm | Punch number set. 3 mm | 1 | nos | maninagar_con | 15 | |
| 169 | Drill twist straight shank 3 mm to 12 mm by 0.5 mm H.S.S. | Drill twist straight shank 3 mm to 12 mm by 0.5 mm H.S.S. | 4 | nos | maninagar_con | 15 | |
| 170 | Hand Reamer set Taper pin straight flute Nominal Dia. 6, 8, 10, 12, 16mm | Hand Reamer set (Taper pin straight flute) Nominal Dia. 6, 8, 10, 12, 16mm | 1 | set | maninagar_con | 15 | |
| 171 | Adjustable pipe die set | Adjustable pipe die set BSP cover pipe size 1 inch or 3/4 inch | 1 | nos | maninagar_con | 15 | |
| 172 | Wing compass. 254 mm or 300 mm | Wing compass. 254 mm or 300 mm | 2 | nos | maninagar_con | 15 | |
| 173 | Knurling tool, Diamond, straight and Diagonal | Knurling tool (Diamond, straight & Diagonal) | 2 | nos | maninagar_con | 15 | |
| 174 | Indexable boring bar with inserts 1 inch shank | Indexable boring bar with inserts 1inch shank | 8 | nos | maninagar_con | 15 | |
| 175 | Lapping plate Dia. 6 inch | Lapping plate Dia. 6 inch | 4 | nos | maninagar_con | 15 | |
| 176 | Drill gauges | Drill gauges Letter drill gauge (A to Z), Number drill gauge (1 to 60), Metric drill gauge (1.5mm to 12.5mm, 30 holes) | 4 | set | maninagar_con | 15 | |
| 177 | Cast Iron Globe Valve, Flanged type 150NB | Cast Iron Globe Valve (Flanged type) 150NB, Class 150 Flange - ANSI125-B16.1 | 1 | nos | maninagar_con | 15 | |
| 178 | Stop cock 25NB | Stop cock 25NB (2-way, Threaded end) | 4 | nos | maninagar_con | 15 | |
| 179 | Pulleys for V-belt or Flat belt to fit on 50mm dia. Shaft with key slot | Pulleys (for V-belt or Flat belt) to fit on 50mm dia. Shaft with key slot | 2 | nos | maninagar_con | 15 | |
| 180 | Hollow punch Straight Shank Hollow Punch Sets 5-12mm | Hollow punch Straight Shank Hollow Punch Sets 5-12mm | 2 | nos | maninagar_con | 15 | |
| 181 | Lifting sling 8mm Nominal Dia. Single leg sling | Lifting sling 8mm Nominal Dia. Single leg sling | 2 | nos | maninagar_con | 15 | |
| 182 | Stake hatchet with Leg. 300 X 200 X 20 mm | Stake hatchet with Leg. 300 X 200 X 20 mm | 2 | nos | maninagar_con | 15 | |
| 183 | Stake grooving. 100 X 100 X 300 mm | Stake grooving. 100 X 100 X 300 mm | 2 | nos | maninagar_con | 15 | |
| 184 | Gauge snap Go and Not Go 25 to 50 mm by 5 mm, Set of 6 pieces | Gauge snap Go and Not Go 25 to 50 mm by 5 mm, Set of 6 pieces | 1 | nos | maninagar_con | 15 | |
| 185 | Gauge plug Single ended 5 to 55 by 5 mm. Set of 11 pcs. | Gauge plug Single ended 5 to 55 by 5 mm. Set of 11 pcs. | 1 | nos | maninagar_con | 15 | |
| 186 | Sine bar 125 mm | Sine bar 125 mm | 1 | nos | maninagar_con | 15 | |
| 187 | Engineers try square knife-edge 150 mm Blade | Engineers try square (knife-edge) 150 mm Blade | 1 | nos | maninagar_con | 15 | |
| 188 | Carbide Wear Block. 1 mm - 2 mm | Carbide Wear Block. 1 mm - 2 mm | 2 | nos | maninagar_con | 15 | |
| 189 | Lathe tools bit. 6 mm x 75 mm | Lathe tools bit. 6 mm x 75 mm HSS/Carbide | 4 | nos | maninagar_con | 15 | |
| 190 | Lathe tools bit. 8 mm x 75 mm | Lathe tools bit. 8 mm x 75 mm HSS/Carbide | 4 | nos | maninagar_con | 15 | |
| 191 | Lathe tools bit. 10 mm x 75 mm | Lathe tools bit. 10 mm x 75 mm HSS/Carbide | 4 | nos | maninagar_con | 15 | |
| 192 | Arm strong type tool bit holder. Straight | Arm strong type tool bit holder. Straight | 2 | nos | maninagar_con | 15 | |
| 193 | Adjustable pipe chain tonge to take pipes up to 300 mm | Adjustable pipe chain tonge to take pipes up to 300 mm | 1 | nos | maninagar_con | 15 | |
| 194 | Tweezers 100mm | 100mm | 8 | nos | maninagar_con | 15 | |
| 195 | Crimping tool | FOR RJ45,RJ 11 | 4 | nos | maninagar_con | 15 | |
| 196 | Power Meter | FOR FIBER OPTIC CABLE | 1 | nos | maninagar_con | 15 | |
| 197 | Wireless Access Point | Frequency 5 GHz Frequency Band Dual-Band | 1 | nos | maninagar_con | 15 | |
| 198 | Media Convertor | 10/100Mbps,up to 20km range | 2 | nos | maninagar_con | 15 | |
| 199 | Vernier caliper 150 mm | Vernier caliper 150 mm | 1 | nos | maninagar_con | 15 |
Categories
453
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender