Procurement Opportunity: TITLE1,TITLE2,TITLE3,TITLE4,TITLE5,TITLE6,TITLE7,TITLE9,TITLE10,TITLE11,TITLE12,TITLE13,TITLE14,TIT in EAST SINGHBHUM, JHARKHAND

Earth work in excavation in foundation trenches or drains 1.5 m in width or 10 Sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil . Ordinary rock.

Supplying and filling in plinth with sand under flours including watering raining considalation and dressing complete.

Reinforced cement concrete work in floor roof slab beam walls any thickness plinth and stiring courses fillets columns pillars piers abutments posts and struts etc and all types of works upto floor five level excluding cost of centering shuttering 1 isto 1.5 isto 3 Cement 1 5 coarse sand 3 graded stone aggregate 20 mm nominal size

Centering shuttering including removal of form work for all tyoes of work for providing and fixing straight shuttering. Suspended floorsroofslandingbakaniesshelves etc.

Reinforcement for RCC work including straighting cuttingbending placing in poistion and binding all complete Hot rolled deformed bars or TMT bars.

Brick work with F.P.S bricks of class designation 75 in foundation and plinth in cement moral 1 isto 6 1cement 6 corse sand. for all types of works.

Random rubble with hars stone in foundation and plinth including leveling up with cement concrete 1 isto 6 isto 12 1cement 6 corse sand 12 graded stone aggregate 20mm nominal size at plinth level with cement mortar 1.6 1 cement 6 cparse sand.

Providing and fixing ISI marked M.S pressed butt hingers bright finished with necessary screws etc complete 125 x 652.12mm

Providing and fixing ISI marked oxidised M.S tower bolt black finish Barrel type with necessary screws etc completed 250x10mm

Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete

Providing and fixing to existing door reinforced plastic FRP panelled door shutter of required and approved brand and manufacutred made with fire retardant grade unsturated polyester resin molded to 3 mm thick FRP laminated for forming holloe rails and styles with wooden frame and suitable blocks of seasoned wood inside at required placed for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels and confirming to IS 14856 2000 including fixing to frames.

Providing and fixing 1 mm thick M.S steel cloor with frame of 40 x 40 x 6mm angle iron and 3mm M.S gassed plates at the juctions and corners all necessery fitting complete including applying a priming coat of approved steel primer. Using M.S angles 40x40x6mm for diagonal braces

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 thickness to be specified by the manufacture of approved make in all clour shades except burgundy bottle green black of any size as approved by Engineer incharge in skirting risers of steps and dados over 12mm thick bed of cement mortar 1isto3 at the rate 3.3 kg per sqm including pointing in white cement mixed with pigment of machine shade complete.

Cement plaster skirting Upto 30cm height with cement mortor 1 isto 3 isto 9 cement 3 coarse sand finished with a floating coat of neat cment 3 mm thick.

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion i single socked pipes 110 mm diameter.

6mm cement plaser to celling of mix 1 isto 3 1 cement 3 fine sand

White washing with line on new work three or more coats to give an even surface.

Painting with 1st quality synthetic enamel paint make Asian or Berger or of approved brand and manufacture of required colour to give and even shade. Two or more coat of suitable shade with ordinary paint of approved brand and manufacture.

Dry brick pitching hair brick thick in drain including supply of bricks and preparing the surface complete with F.P.S bricks of class desigantion 7.5

Providing and fixing white vitreous china flat back or wall corner tyoe liped front urinal basin of 430x260x350mm and 340 x410x260mm sizes respectively with automatice flushing cistern with standard flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets cutting and making good the walls and floors wherever required. One urinal basin with 5 liter white P.VC automatic flushing cistern.

Providing and fixing wash basin with C.I brackets 15mm C.P brass pillar taps 32mm CP brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever required. White vitreous china wash basin size 630x450mm with a single 15mm C.P brass pillar tap.

Providing and Fixing rectangular shape 453 x 357 mm mirror of superior glass and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard boarding complete as per the direction of E.I.C

providing and fixing CP towl rail completed with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved qulaity and colour 450mm long towel rail with total length of 495mm 78mm wide and effective height of 88mm weighing not less than 170gms.

providing and fixing GI pipes complete with GI fitting including trenching and refilling etc. 15 mm dia nominal bore.

providing and fixing GI pipes complete with GI fitting including trenching and refilling etc. 25mm dia nominal bore.

providing and fixing GI pipes complete with GI fitting including trenching and refilling etc. 50mm dia nominal bore.

Provind and fixing of pre coated galvanised steel sheet roofing accessories 0.50 mm plus or minus 5 percent total coated thickness TCT thick zinc coating 120grams as per IS 277 in 240 mpa steel grade 5to7 microns epoxy primeier on both side of the steel and polister of coat 15to18 microns using self drilling self tapping screws or with polymer coated J or L hooks bolts and nuts and or GI seam bolts and nuts. GI plane and Bitumen washers complete. Rigidis 500to600mm

Provind and fixing C.P brass stope cock of standard design and of approved confirming to IS 8931 15 mm nominal bore

Provind and fixing gate valve GM 50 mm.

Provind and fixing hydraulic door closer

Providing and fixing glazed stone ware pipe or fume pipe 150 dia

Making soak pit 2.5m diameter 3.00meter deep with 45x45 cm dry bricks honey comb shaft with bricks of clas designation 75 and S.W drain pipe 100mm dia meter 1.8 meter long complete as per standard design with F.P.S bricks

Renewwing glass panes 4 mm thick with putty and nails