GEM

Invitation to Bid - Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Bathroom or Toilet Mirror (V3),Copper allo in PUNE, MAHARASHTRA

Bid Publish Date

14-Jul-2026, 4:54 pm

Bid End Date

24-Jul-2026, 5:00 pm

Location

PUNE , MAHARASHTRA

WhatsApp Generate Docs

Progress

Issue14-Jul-2026, 4:54 pm

AwardPending

Explore all 6 tabs to view complete tender details

Quantity

957

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

Bid To RA Enabled

Yes

Item Category

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3) , Bathroom or Toilet Mirror (V3) (Q4) , PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming to IS 9763 (Q3) , Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming to IS 12701 (Q3) , Towel Rail (Q3) , Bathroom Water Shower (V2) (Q3) , Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3) , Plastic Seats and Covers for Water - Closets as per IS 2548 (Q3) , Ceramic ( Vitreous China ) Flushing Cisterns for Water Closets and Urinals conforming to IS 774 (Q3) , Flexible Drain Hoses for Wash Basins/ Sinks (Q3) , Waste Fittings for Washbasin and Sinks as per IS 2963 (Q3) , Towel Ring (Q3) , Floor Drain Traps (V2) (Q3) , Soap Dish - Case (Q4) , Stainless Steel Shelf Rack (Q3)

Delivery Details

Max Delivery Days

Delivery Locations

Delivery Cities

Pune

Delivery Locations

Consignee	Address	City	State	Pincode	Quantity	Delivery Days	Additional Requirement
-	Pune	Pune	-	-	13	15	-

Authority Records

MINISTRY OF DEFENCEMILITARY AFFAIRS DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 53

GeM-Bidding-9497498.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

CATALOG-Specification-10

CATALOG Specification

CATALOG-Specification-11

CATALOG Specification

CATALOG-Specification-12

CATALOG Specification

CATALOG-Specification-13

CATALOG Specification

CATALOG-Specification-14

CATALOG Specification

CATALOG-Specification-15

CATALOG Specification

CATALOG-Specification-16

CATALOG Specification

CATALOG-Specification-17

CATALOG Specification

CATALOG-Specification-18

CATALOG Specification

CATALOG-Specification-19

CATALOG Specification

CATALOG-Specification-20

CATALOG Specification

CATALOG-Specification-21

CATALOG Specification

CATALOG-Specification-22

CATALOG Specification

CATALOG-Specification-23

CATALOG Specification

CATALOG-Specification-24

CATALOG Specification

CATALOG-Specification-25

CATALOG Specification

CATALOG-Specification-26

CATALOG Specification

CATALOG-Specification-27

CATALOG Specification

CATALOG-Specification-28

CATALOG Specification

CATALOG-Specification-29

CATALOG Specification

CATALOG-Specification-30

CATALOG Specification

CATALOG-Specification-31

CATALOG Specification

CATALOG-Specification-32

CATALOG Specification

CATALOG-Specification-33

CATALOG Specification

CATALOG-Specification-34

CATALOG Specification

CATALOG-Specification-35

CATALOG Specification

CATALOG-Specification-36

CATALOG Specification

CATALOG-Specification-37

CATALOG Specification

CATALOG-Specification-38

CATALOG Specification

CATALOG-Specification-39

CATALOG Specification

CATALOG-Specification-40

CATALOG Specification

CATALOG-Specification-41

CATALOG Specification

CATALOG-Specification-42

CATALOG Specification

CATALOG-Specification-43

CATALOG Specification

CATALOG-Specification-44

CATALOG Specification

CATALOG-Specification-45

CATALOG Specification

CATALOG-Specification-46

CATALOG Specification

CATALOG-Specification-47

CATALOG Specification

CATALOG-Specification-48

CATALOG Specification

CATALOG-Specification-49

CATALOG Specification

CATALOG-Specification-50

CATALOG Specification

CATALOG-Specification-51

CATALOG Specification

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

Indian Army Department Of Military Affairs Copper Alloy Taps IS 8931 & IS 9763 Procurement 2026

Indian Army

HYDERABAD, TELANGANA

Posted: 19 June 2026

Closed: 26 June 2026

GEM

Health Faucet,Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Rotational Moulded Polyethyl

Indian Army

Posted: 17 June 2026

Closed: 27 June 2026

GEM

Bathroom Water Shower (V2),Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Ta

Indian Army

GURDASPUR, PUNJAB

Posted: 10 July 2025

Closed: 21 July 2025

GEM

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Indian Army

UDHAMPUR, JAMMU & KASHMIR

Posted: 26 February 2026

Closed: 3 March 2026

GEM

Indian Army Copper Alloy Taps & Bathroom Fixtures Tender Udhamap ur Jammu & Kashmir 2026 IS Standards

Indian Army

UDHAMPUR, JAMMU & KASHMIR

Posted: 17 February 2026

Closed: 23 February 2026

GEM

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 3 wall mounted combination tap assembly
Type	Dimension	As per table 6 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Brass rods
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Forged brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Stainless steel
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	6

Category	Specification	Requirement
Generic	Type of Mirror	Plain Mirror
Generic	Mirror Shape	Rectangular
Generic	Type of Mirror Coating	Aluminium Coated
Generic	Frame	With
Generic	Frame Material	Stainless Steel
Generic	Frame Color	Silver
Generic	Mirror Mounting / Fixing System	Clamp Support
Dimensions	Width/Diameter of Mirror (inch)	>12.5 to ≤15
Dimensions	Height/Diameter of Mirror (inch)	>5.1 to ≤7.5
Dimensions	Thickness of Mirror (mm)	>7.5 to ≤10

Category	Specification	Requirement
Generic	Conformity to IS 9763	Yes
Generic	Product Type	Stop Valve
Generic	Nominal Size (in mm)	15 mm (1/2")
Generic	Hot/Cold Identification of Control Devices	Red Color or Letter H for Hot Water
Materials	Material of Body of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Bonnet of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Spindle of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Handle of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Seal of Tap/ Valve	Thermoplastic Polyester based Elastomaster
Dimensions & Construction	Dimensions (in mm)	Stop Valves (As per Table 5 of IS 9763)

Category	Specification	Requirement
Generic	Type of Mirror	Decorative Mirror
Generic	Mirror Shape	Rectangular
Generic	Type of Mirror Coating	Aluminium Coated
Generic	Frame	With
Generic	Frame Material	Plastic
Generic	Frame Color	White
Generic	Mirror Mounting / Fixing System	Wall Hanging System (Hook/Hanger)
Dimensions	Width/Diameter of Mirror (inch)	>10 to ≤12.5
Dimensions	Height/Diameter of Mirror (inch)	>20 to ≤25
Dimensions	Thickness of Mirror (mm)	>3.5 to ≤4

Category	Specification	Requirement
Generic Requirement	Type (Based on Shape of Tank)	Cylindrical Vertical Tank with Lid
Generic Requirement	Layer of Tank	Single Layered
Dimensions	Minimum Net Capacity (In Liter)	1000 Liter

Category	Specification	Requirement
Material & Dimensions	Rail Material	Brass
Material & Dimensions	Mounting Bracket Material	Stainless Steel (SS 304)
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	600 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	19 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Single Bar
Design & Configuration	Bar Shape of Rail	Flat
Load & Performance	Recommended Load Capacity (in kg)	3–6 kg
Fixing & Accessories	Fixing Hardware Included	No
Fixing & Accessories	Fasteners Material	Galvanized Steel

Category	Specification	Requirement
Type	Type of shower	Hand Shower
Type	Material of body/face plate	Brass
Type	Finish of face plate	Chrome plated
Type	Type of Water Flow	Only Rainfall
Type	Type of Multiple flow	NA
Type	Shape of Shower	Round
Dimensions	Size of Shower	80 mm
Dimensions	Overall length of Hand Shower (in mm)	200
Dimensions	Length of Hand Shower Tube (in mt)	1.5
Dimensions	Diameter of Hand Shower Tube (in mm)	12
Dimensions	Material of Hand Shower Tube	Stainless Steel
Dimensions	Overall length of Shower Arm (in mm)	NA
Warranty	Warranty (in Years)	1

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	20 mm
Generic	Pressure Classification	Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Generic	Gate Valve Type	Solid Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet integral seats
Material & Manufacture	Material of Body	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Bonnet/Cover Material	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Stem, hinge pin and plug	Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	10.5 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	4.1 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	13.0 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	9 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	32 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	As per Table 11 of IS 778

Category	Specification	Requirement
Material	Materials of Seat and Covers	Polystyrene
Material	Materials of Hinging Device	Suitable Plastic(with reinforcement)
RIGIDITY	Seat	Grade 1
RIGIDITY	Cover	Grade 2

Category	Specification	Requirement
Generic	Conformity to IS 774	Yes
Generic	Flushing Device	Cistern
Construction & Material	Material for Flush Pipe	Polypropylene Pipe
Construction & Material	Material for Overflow Pipe	Unplasticized Polyvinyl Chloride (PVC) Pipe (Conformity to Is 4985)
Construction & Material	Cistern Discharge Capacity	Full Flush (4 ± 0.5 liters) Reduced Flush (2 ± 0.5 liters)

Category	Specification	Requirement
Generic	Installation Type	Threaded
Material & Construction	Hose Material	PVC
Material & Construction	Reinforcement Type	Unreinforced
Material & Construction	Flexibility Type	Smooth Bore
Dimensions	Nominal Bore of Hose (in mm)	40 mm
Dimensions	Hose Length in meter (Tolerance : ± 10 mm)	1 meter
Dimensions	Wall Thickness (in mm)	2 mm
Performance & Usage	Durability Grade	Medium Duty
Basin / Sink Connection Fitting (Waste Coupling)	Connection Fitting Included	Yes
Basin / Sink Connection Fitting (Waste Coupling)	Type of Connection Fitting	Coupling Nut with Washer
Basin / Sink Connection Fitting (Waste Coupling)	Fitting Material	PVC
Basin / Sink Connection Fitting (Waste Coupling)	Washer / Gasket Material	Rubber

Category	Specification	Requirement
RAW MATERIAL	Material of Waste Fitting	Brass conforming to Grade 3 of IS 292/1961
DIMENSION	Nominal Size	32 mm for washbasin
WARANTEE	WARANTEE PERIOD IN NUMBER OF YEARS	1

Category	Specification	Requirement
Generic	Installation Type	Threaded
Material & Construction	Hose Material	PVC
Material & Construction	Reinforcement Type	Unreinforced
Material & Construction	Flexibility Type	Corrugated
Dimensions	Nominal Bore of Hose (in mm)	40 mm
Dimensions	Hose Length in meter (Tolerance : ± 10 mm)	1.5 meter
Dimensions	Wall Thickness (in mm)	1.5 mm
Performance & Usage	Durability Grade	Medium Duty
Basin / Sink Connection Fitting (Waste Coupling)	Connection Fitting Included	Yes
Basin / Sink Connection Fitting (Waste Coupling)	Type of Connection Fitting	Threaded Adapter
Basin / Sink Connection Fitting (Waste Coupling)	Fitting Material	PVC
Basin / Sink Connection Fitting (Waste Coupling)	Washer / Gasket Material	Rubber

Category	Specification	Requirement
Generic	Installation Type	Threaded
Material & Construction	Hose Material	PVC
Material & Construction	Reinforcement Type	Unreinforced
Material & Construction	Flexibility Type	Smooth Bore
Dimensions	Nominal Bore of Hose (in mm)	32 mm
Dimensions	Hose Length in meter (Tolerance : ± 10 mm)	1 meter
Dimensions	Wall Thickness (in mm)	1 mm
Performance & Usage	Durability Grade	Light Duty
Basin / Sink Connection Fitting (Waste Coupling)	Connection Fitting Included	Yes
Basin / Sink Connection Fitting (Waste Coupling)	Type of Connection Fitting	Coupling Nut with Washer
Basin / Sink Connection Fitting (Waste Coupling)	Fitting Material	PVC
Basin / Sink Connection Fitting (Waste Coupling)	Washer / Gasket Material	Rubber

Category	Specification	Requirement
Type	Type of shower	Overhead shower (Wall mount with shower arm)
Type	Material of body/face plate	ABS
Type	Finish of face plate	White matt
Type	Type of Water Flow	Rainfall and Multiple flow
Type	Type of Multiple flow	Rainflow
Type	Shape of Shower	Rectangular
Dimensions	Size of Shower	65x 95 mm
Dimensions	Overall length of Hand Shower (in mm)	NA
Dimensions	Length of Hand Shower Tube (in mt)	NA
Dimensions	Diameter of Hand Shower Tube (in mm)	NA
Dimensions	Material of Hand Shower Tube	NA
Dimensions	Overall length of Shower Arm (in mm)	120
Warranty	Warranty (in Years)	1

Category	Specification	Requirement
Type	Type of shower	Overhead shower (Ceiling mount with shower arm)
Type	Material of body/face plate	ABS
Type	Finish of face plate	White matt
Type	Type of Water Flow	Only Rainfall
Type	Type of Multiple flow	NA
Type	Shape of Shower	Round
Dimensions	Size of Shower	140 mm
Dimensions	Overall length of Hand Shower (in mm)	NA
Dimensions	Length of Hand Shower Tube (in mt)	NA
Dimensions	Diameter of Hand Shower Tube (in mm)	NA
Dimensions	Material of Hand Shower Tube	NA
Dimensions	Overall length of Shower Arm (in mm)	150
Warranty	Warranty (in Years)	1

Category	Specification	Requirement
Generic	Ring Shape	D-Shape
Material & Dimensions	Ring Material	Brass
Material & Dimensions	Mounting Bracket Material	Brass
Material & Dimensions	Inner Diameter of Ring (in mm) (Tolerance : ± 10 mm)	200 mm
Material & Dimensions	Ring Rod Thickness (in mm) (Tolerance : ± 10 mm)	12 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	100 mm
Material & Dimensions	Mounting Plate Size (in mm)	80 mm
Design & Configuration	Ring Movement Type	Swing Ring
Load & Performance	Recommended Load Capacity (in kg)	Above 5 kg
Fixing & Accessories	Fixing Hardware Included	No
Fixing & Accessories	Fasteners Material	Galvanized Steel

Category	Specification	Requirement
Generic	Installation Type	Slip-on
Material & Construction	Hose Material	PVC
Material & Construction	Reinforcement Type	Unreinforced
Material & Construction	Flexibility Type	Corrugated
Dimensions	Nominal Bore of Hose (in mm)	32 mm
Dimensions	Hose Length in meter (Tolerance : ± 10 mm)	1 meter
Dimensions	Wall Thickness (in mm)	1.5 mm
Performance & Usage	Durability Grade	Light Duty
Basin / Sink Connection Fitting (Waste Coupling)	Connection Fitting Included	Yes
Basin / Sink Connection Fitting (Waste Coupling)	Type of Connection Fitting	Coupling Nut with Washer
Basin / Sink Connection Fitting (Waste Coupling)	Fitting Material	PVC
Basin / Sink Connection Fitting (Waste Coupling)	Washer / Gasket Material	Rubber

Category	Specification	Requirement
Material & Dimensions	Rail Material	PVC Plastic
Material & Dimensions	Mounting Bracket Material	PVC Plastic
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	600 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	16 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Single Bar
Design & Configuration	Bar Shape of Rail	Round
Load & Performance	Recommended Load Capacity (in kg)	Up to 3 kg
Fixing & Accessories	Fixing Hardware Included	No
Fixing & Accessories	Fasteners Material	Plastic

Category	Specification	Requirement
RAW MATERIAL	Material of Waste Fitting	Leaded Tin Bronze conforming to Grade 2 of IS 318/1962
DIMENSION	Nominal Size	32 mm for washbasin
WARANTEE	WARANTEE PERIOD IN NUMBER OF YEARS	4

Category	Specification	Requirement
Material	Material of the box	Stainless Steel
Lid Details	Type of Lid	TRANSPARENT
Lid Details	Lid type (according to fixation)	DETACHABLE

Category	Specification	Requirement
GENERIC	Configuration	With 4-Shelf (including top shelf)
GENERIC	Shape of support structure	Rectangular hollow type
GENERIC	Ground clearance (mm)	25 mm
GENERIC	Mode of supply	Knocked Down To Be Assembled At Consignee Site By Consignee Himself
MATERIAL & MATERIAL THICKNESS	Shelf material	Stainless Steel Grade 202 galvanized
MATERIAL & MATERIAL THICKNESS	Shelf material thickness	0.6 mm
MATERIAL & MATERIAL THICKNESS	Support structure material	Stainless Steel Grade 202 galvanized
MATERIAL & MATERIAL THICKNESS	Support structure material thickness	0.6 mm
DIMENSION	Width of shelf rack ± 10 mm	915 mm
DIMENSION	Depth of shelf rack ± 10 mm	405 mm
DIMENSION	Height of shelf rack ± 10 mm	1220 mm
DIMENSION	Height of support structure ± 10 mm	1245 mm
DIMENSION	Size of support structure	30 mm x 30 mm
WARRANTY	Warranty period	1 - Year
CERTIFICATION	Test report to be furnished to buyer on demand	No

Browse Tenders

Categories

States

Cities

Authorities

Invitation to Bid - Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Bathroom or Toilet Mirror (V3),Copper allo in PUNE, MAHARASHTRA

Categories 41

Additional Tender Data

Commercial Details

Delivery Details

Delivery Locations

Authority Records

BID & GeM Expert Consultancy

Documents 53

GeM-Bidding-9497498.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13

CATALOG-Specification-14

CATALOG-Specification-15

CATALOG-Specification-16

CATALOG-Specification-17

CATALOG-Specification-18

CATALOG-Specification-19

CATALOG-Specification-20

CATALOG-Specification-21

CATALOG-Specification-22

CATALOG-Specification-23

CATALOG-Specification-24

CATALOG-Specification-25

CATALOG-Specification-26

CATALOG-Specification-27

CATALOG-Specification-28

CATALOG-Specification-29

CATALOG-Specification-30

CATALOG-Specification-31

CATALOG-Specification-32

CATALOG-Specification-33

CATALOG-Specification-34

CATALOG-Specification-35

CATALOG-Specification-36

CATALOG-Specification-37

CATALOG-Specification-38

CATALOG-Specification-39

CATALOG-Specification-40

CATALOG-Specification-41

CATALOG-Specification-42

CATALOG-Specification-43

CATALOG-Specification-44

CATALOG-Specification-45

CATALOG-Specification-46

CATALOG-Specification-47

CATALOG-Specification-48

CATALOG-Specification-49

CATALOG-Specification-50

CATALOG-Specification-51

GEM General Terms and Conditions Document

Past Similar Tenders (Historical Results)

Indian Army Department Of Military Affairs Copper Alloy Taps IS 8931 & IS 9763 Procurement 2026

Health Faucet,Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Rotational Moulded Polyethyl

Bathroom Water Shower (V2),Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Ta

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Indian Army Copper Alloy Taps & Bathroom Fixtures Tender Udhamap ur Jammu & Kashmir 2026 IS Standards

Technical Specifications 51 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Item #6 Details