GEM

Invitation to Bid - Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform in GURDASPUR, PUNJAB

Bid Publish Date

14-Jul-2026, 7:13 pm

Bid End Date

25-Jul-2026, 7:00 pm

EMD

₹20,000

Location

GURDASPUR , PUNJAB

WhatsApp Generate Docs

Progress

Issue14-Jul-2026, 7:13 pm

AwardPending

Explore all 6 tabs to view complete tender details

Quantity

603

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

Bid To RA Enabled

Yes

Item Category

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3) , Bathroom Water Shower (V2) (Q3) , PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming to IS 9763 (Q3) , Towel Rail (Q3) , Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming to IS 12701 (Q3) , Ceramic ( Vitreous China ) Flushing Cisterns for Water Closets and Urinals conforming to IS 774 (Q3) , Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3) , Plastic Seats and Covers for Water - Closets as per IS 2548 (Q3) , Stainless Steel Sinks for Domestic Purposes (V3) as per IS 13983 (Q2) , Stainless Steel Shelf Rack (Q3) , Bathroom or Toilet Mirror (V3) (Q4) , Flexible Drain Hoses for Wash Basins/ Sinks (Q3) , Weld Mesh Febric as per IS 4948 (Q3)

Advisory Bank

State Bank of India

Delivery Details

Max Delivery Days

Delivery Locations

Delivery Cities

Gurdaspur

Delivery Locations

Consignee	Address	City	State	Pincode	Quantity	Delivery Days	Additional Requirement
-	Gurdaspur	Gurdaspur	-	-	1	15	-

Authority Records

MINISTRY OF DEFENCEMILITARY AFFAIRS DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 28

GeM-Bidding-9582371.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

CATALOG-Specification-10

CATALOG Specification

CATALOG-Specification-11

CATALOG Specification

CATALOG-Specification-12

CATALOG Specification

CATALOG-Specification-13

CATALOG Specification

CATALOG-Specification-14

CATALOG Specification

CATALOG-Specification-15

CATALOG Specification

CATALOG-Specification-16

CATALOG Specification

CATALOG-Specification-17

CATALOG Specification

CATALOG-Specification-18

CATALOG Specification

CATALOG-Specification-19

CATALOG Specification

CATALOG-Specification-20

CATALOG Specification

CATALOG-Specification-21

CATALOG Specification

CATALOG-Specification-22

CATALOG Specification

CATALOG-Specification-23

CATALOG Specification

CATALOG-Specification-24

CATALOG Specification

CATALOG-Specification-25

CATALOG Specification

CATALOG-Specification-26

CATALOG Specification

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

Indian Army Department Of Military Affairs Copper Alloy Taps IS 8931 & IS 9763 Procurement 2026

Indian Army

HYDERABAD, TELANGANA

Posted: 19 June 2026

Closed: 26 June 2026

GEM

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Indian Army

JODHPUR, RAJASTHAN

Posted: 5 July 2025

Closed: 14 July 2025

GEM

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Indian Army

JALANDHAR, PUNJAB

Posted: 15 September 2025

Closed: 25 September 2025

GEM

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Indian Army

UDHAMPUR, JAMMU & KASHMIR

Posted: 26 February 2026

Closed: 3 March 2026

GEM

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Indian Army

AGRA, UTTAR PRADESH

Posted: 13 November 2025

Closed: 24 November 2025

GEM

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 1 Bib tap
Type	Dimension	As per table 4 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Stainless steel
Material	Material of 'O' ring , gasket, and seat washer	Neoprene rubber
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	12

Category	Specification	Requirement
Type	Type of shower	Hand Shower
Type	Material of body/face plate	Stainless Steel
Type	Finish of face plate	Chrome plated
Type	Type of Water Flow	Rainfall and Multiple flow
Type	Type of Multiple flow	Mist
Type	Shape of Shower	Square
Dimensions	Size of Shower	75 mm
Dimensions	Overall length of Hand Shower (in mm)	200
Dimensions	Length of Hand Shower Tube (in mt)	1.5
Dimensions	Diameter of Hand Shower Tube (in mm)	8
Dimensions	Material of Hand Shower Tube	Stainless Steel
Dimensions	Overall length of Shower Arm (in mm)	NA
Warranty	Warranty (in Years)	1

Category	Specification	Requirement
Generic	Conformity to IS 9763	Yes
Generic	Product Type	Plastic Bib Tap
Generic	Nominal Size (in mm)	15 mm (1/2")
Generic	Hot/Cold Identification of Control Devices	Blue Color or Letter C for Cold Water
Materials	Material of Body of Tap/ Valve	PP Copolymer (conforming to IS 10910)
Materials	Material of Bonnet of Tap/ Valve	Nylon 66 (conforming to 13464)
Materials	Material of Spindle of Tap/ Valve	PBT (conforming to IS 13193)
Materials	Material of Handle of Tap/ Valve	PP Copolymer (conforming to IS 10910)
Materials	Material of Seal of Tap/ Valve	Thermoplastic Polyester based Elastomaster
Dimensions & Construction	Dimensions (in mm)	Bib Taps (As per Table 3 of IS 9763)

Category	Specification	Requirement
Material & Dimensions	Rail Material	Stainless Steel (SS 202)
Material & Dimensions	Mounting Bracket Material	Stainless Steel (SS 202)
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	600 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	16 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Single Bar
Design & Configuration	Bar Shape of Rail	Round
Load & Performance	Recommended Load Capacity (in kg)	Up to 3 kg
Fixing & Accessories	Fixing Hardware Included	Yes
Fixing & Accessories	Fasteners Material	Galvanized Steel

Category	Specification	Requirement
Generic Requirement	Type (Based on Shape of Tank)	Cylindrical Vertical Tank with Lid
Generic Requirement	Layer of Tank	Double Layered
Dimensions	Minimum Net Capacity (In Liter)	500 Liter

Category	Specification	Requirement
Generic	Conformity to IS 774	Yes
Generic	Flushing Device	Cistern
Construction & Material	Material for Flush Pipe	Polypropylene Pipe
Construction & Material	Material for Overflow Pipe	Unplasticized Polyvinyl Chloride (PVC) Pipe (Conformity to Is 4985)
Construction & Material	Cistern Discharge Capacity	Full Flush (6 ± 0.5 liters) Reduced Flush (3 ± 0.5 liters)

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	40 mm
Generic	Pressure Classification	Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa
Generic	Gate Valve Type	Solid Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet integral seats
Material & Manufacture	Material of Body	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Bonnet/Cover Material	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Stem, hinge pin and plug	Forged Brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	13.5 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	5.0 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	15.0 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	12 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	55 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	NA for Screwed Valves

Category	Specification	Requirement
Material	Materials of Seat and Covers	Polystyrene
Material	Materials of Hinging Device	Suitable Plastic(with reinforcement)
RIGIDITY	Seat	Grade 1
RIGIDITY	Cover	Grade 1

Category	Specification	Requirement
Standards	Confirmity to standard IS 13983 and ISI Marked	Yes
Types and Specification	Type of Bowl	Rectangular
Types and Specification	Type of Sink built in counter shall be as per clause 4 Of IS 13983	Single bowl single drainer- right or left hand
Types and Specification	Material used stainless steel of Grade Designation used as per clause 5 of IS 13983	SS 304 Or higher
Types and Specification	Minimum Internal Dimensions of Bowls as per clause 6.3 of IS 13983	For round: 360 mm (Diameter)
Types and Specification	Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983	Without tap holes
Types and Specification	Sinks shall be provided without an overflow hole or with an overflow hole as per clause 7.6 of IS 13983	Without an overflow hole
Test Report	Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification	Yes
Test Report	Test Report to be furnished to the buyer on demand	Yes

Category	Specification	Requirement
GENERIC	Configuration	With 5-Shelf (including top shelf)
GENERIC	Shape of support structure	Round hollow type
GENERIC	Ground clearance (mm)	25 mm
GENERIC	Mode of supply	Knocked Down To Be Assembled At Consignee Site By Consignee Himself
MATERIAL & MATERIAL THICKNESS	Shelf material	Stainless Steel Grade 304 galvanized
MATERIAL & MATERIAL THICKNESS	Shelf material thickness	0.6 mm
MATERIAL & MATERIAL THICKNESS	Support structure material	Stainless Steel Grade 304 galvanized
MATERIAL & MATERIAL THICKNESS	Support structure material thickness	0.6 mm
DIMENSION	Width of shelf rack ± 10 mm	915 mm
DIMENSION	Depth of shelf rack ± 10 mm	405 mm
DIMENSION	Height of shelf rack ± 10 mm	1220 mm
DIMENSION	Height of support structure ± 10 mm	1245 mm
DIMENSION	Size of support structure	30 mm x 30 mm
WARRANTY	Warranty period	1 - Year
CERTIFICATION	Test report to be furnished to buyer on demand	No

Category	Specification	Requirement
Generic	Type of Mirror	Plain Mirror
Generic	Mirror Shape	Rectangular
Generic	Type of Mirror Coating	Silver Coated
Generic	Frame	Without
Generic	Frame Material	NA (Frameless)
Generic	Frame Color	NA
Generic	Mirror Mounting / Fixing System	Wall Hanging System (Hook/Hanger)
Dimensions	Width/Diameter of Mirror (inch)	>15 to ≤20
Dimensions	Height/Diameter of Mirror (inch)	>45 to ≤50
Dimensions	Thickness of Mirror (mm)	>3.5 to ≤4

Category	Specification	Requirement
Generic	Type of Mirror	Decorative Mirror
Generic	Mirror Shape	Square
Generic	Type of Mirror Coating	Aluminium Coated
Generic	Frame	With
Generic	Frame Material	Plastic
Generic	Frame Color	White
Generic	Mirror Mounting / Fixing System	Wall Hanging System (Hook/Hanger)
Dimensions	Width/Diameter of Mirror (inch)	>12.5 to ≤15
Dimensions	Height/Diameter of Mirror (inch)	>12.5 to ≤15
Dimensions	Thickness of Mirror (mm)	>7.5 to ≤10

Category	Specification	Requirement
Generic	Installation Type	Threaded
Material & Construction	Hose Material	PVC
Material & Construction	Reinforcement Type	Unreinforced
Material & Construction	Flexibility Type	Smooth Bore
Dimensions	Nominal Bore of Hose (in mm)	32 mm
Dimensions	Hose Length in meter (Tolerance : ± 10 mm)	1 meter
Dimensions	Wall Thickness (in mm)	1 mm
Performance & Usage	Durability Grade	Light Duty
Basin / Sink Connection Fitting (Waste Coupling)	Connection Fitting Included	Yes
Basin / Sink Connection Fitting (Waste Coupling)	Type of Connection Fitting	Coupling Nut with Washer
Basin / Sink Connection Fitting (Waste Coupling)	Fitting Material	PVC
Basin / Sink Connection Fitting (Waste Coupling)	Washer / Gasket Material	Rubber

Category	Specification	Requirement
CONSTRUCTIONAL	Material	Stainless steel wire grade X 04 Cr 17 Ni 12 Mo 2 of IS 6528
CONSTRUCTIONAL	Square Mesh Size (centre to centre distance bothways) ± 5 % (mm)	50 mm
CONSTRUCTIONAL	Nominal Diameter of Square Mesh Wire	2 mm
CONSTRUCTIONAL	Oblong Mesh Size Pitch of Wire Longitudinal (± 5 %)	NA for Square Mesh
CONSTRUCTIONAL	Oblong Mesh Size Pitch of Wire Transverse (± 5 %)	NA for Square Mesh
CONSTRUCTIONAL	Nominal Diameter of Oblong Mesh Wire Longitudinal	NA for Square Mesh
CONSTRUCTIONAL	Nominal Diameter of Oblong Mesh Wire Transverse	NA for Square Mesh
CONSTRUCTIONAL	Width of Fabric	0.9 m
CONSTRUCTIONAL	Length of Fabric	10(for roll only)
CERTIFICATION	ISI Marked	No

Browse Tenders

Categories

States

Cities

Authorities

Invitation to Bid - Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform in GURDASPUR, PUNJAB

Categories 36

Additional Tender Data

Commercial Details

Delivery Details

Delivery Locations

Authority Records

BID & GeM Expert Consultancy

Documents 28

GeM-Bidding-9582371.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13

CATALOG-Specification-14

CATALOG-Specification-15

CATALOG-Specification-16

CATALOG-Specification-17

CATALOG-Specification-18

CATALOG-Specification-19

CATALOG-Specification-20

CATALOG-Specification-21

CATALOG-Specification-22

CATALOG-Specification-23

CATALOG-Specification-24

CATALOG-Specification-25

CATALOG-Specification-26

GEM General Terms and Conditions Document

Past Similar Tenders (Historical Results)

Indian Army Department Of Military Affairs Copper Alloy Taps IS 8931 & IS 9763 Procurement 2026

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Technical Specifications 26 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Item #6 Details

Item #7 Details

Item #8 Details

Item #9 Details

Item #10 Details

Item #11 Details

Item #12 Details

Item #13 Details

Item #14 Details

Item #15 Details

Item #16 Details

Item #17 Details

Item #18 Details

Item #19 Details

Item #20 Details

Item #21 Details

Item #22 Details

Item #23 Details

Item #24 Details

Item #25 Details

Item #26 Details

🤖 AI-Powered Bidder Prediction

Required Documents

Similar Tenders

Indian Army Copper Alloy Taps & Bathroom Fittings Tender 2026 IS 8931/778/9763 - Government Procurement

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform