Directorate Of School Education Portable Toilet Tender Jammu & Kashmir Poonch 2026 ISO 9001 BIS
Directorate Of School Education
POONCH, JAMMU & KASHMIR
Posted:
25 May 2026
Closed:
4 June 2026
GEM
GEM
Government Tender Published for Portable Toilet
Bid Publish Date
10-Jun-2026, 12:19 pm
Bid End Date
20-Jun-2026, 1:00 pm
Progress
Issue10-Jun-2026, 12:19 pm
AwardPending
Quantity
1
Bid Type
Two Packet Bid
N/a announces a tender for Portable Toilet (Q3). Quantity: 1. Submission Deadline: 20-06-2026 13: 00: 00. Last date to apply is approaching fast!
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
Portable Toilet (Q3)
Authority Records
URBAN DEVELOPMENT AND ENVIRONMENT DEPARTMENT
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Bid Preparation
GeM Registration
Document Filing
Free consultation · 24h response
Documents 4
GeM-Bidding-9447539.pdf
Main Document
CATALOG-Specification-1
CATALOG Specification
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Past Similar Tenders
(Historical Results)
5 found
Portable Toilet
Border Security Force (bsf)
RAJAURI, JAMMU & KASHMIR
Posted:
4 February 2025
Closed:
27 February 2025
GEM
Portable Toilet
Urban Administration And Devlopment
SAGAR, MADHYA PRADESH
Posted:
29 January 2025
Closed:
18 February 2025
GEM
Portable Toilet
Border Security Force (bsf)
RAJAURI, JAMMU & KASHMIR
Posted:
4 February 2025
Closed:
27 February 2025
GEM
Portable Toilet
Border Security Force (bsf)
RAJAURI, JAMMU & KASHMIR
Posted:
4 February 2025
Closed:
27 February 2025
GEM
Tender Results
Loading results...
Technical Specifications
1 Item
Item #1 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| GENERIC | Mode of Supply | Assembled Ready To Use, Knocked Down To Be Assembled At Consignee Site By The Seller, Knocked Down To Be Assembled At Consignee Site By Consignee Himself |
| GENERIC | Number of Compartments | 1 - seater portable toilet, 2 - seater portable toilet, 3 - seater portable toilet |
| GENERIC | Type of WC | Indian with ceramic base, Indian with steel base, Indian with FRP, Indian(FRP) with integrated facility(With floor), European with ceramic base, European with steel base |
| GENERIC | Number of WC | 1, 2, 3, 0 |
| GENERIC | Number of Urinals ( For Gents and Ladies to be mentioned separately ) | 1, 2, 3, 0 |
| GENERIC | Number of Bathrooms | 1, 2, 3, 0 |
| GENERIC | Water facility | By mean of overhead tank(Capacity 200Ltrs), By mean of overhead tank(Capacity 300Ltrs), By mean of overhead tank(Capacity 500Ltrs), With running water connection, Direct connection from external supply |
| GENERIC | Sewage facility | Sludge tank(Capacity 200 Ltrs) with 75mm outlet facility through butterfly valve and hosepipe(for 1-seater and 2-seater), Sludge tank(Capacity 400 Ltrs) with 75mm outlet facility through butterfly valve and hosepipe(for 2-seater and 3-seater), Sludge tank(Capacity 500 Ltrs) with 75mm outlet facility through butterfly valve and hosepipe(for 3-seater), Twin Leech pit with insepction chamber, No sewage facility |
| GENERIC | ventilation | One No., Two No., Full size ventilation above door plus half size ventilation on other side for cross ventilation, All 4 - sides |
| GENERIC | Lifting hook | one number heavy lifting hook provided, two number heavy lifting hook provided, four number heavy lifting hook provided, no lifting hook |
| GENERIC | Projection of Roof | 50mm projection on all the four sides, 100mm projection from front and 50mm projection on other sides, 50mm projection from front and 25mm projection on other sides, NO projection |
| GENERIC | Installation and commissioning | To be done by seller, To be done by Consignee himself |
| GENERIC | Plumbing and Sanitary fitting connection | To be done by seller, To be done by Consignee himself |
| GENERIC | Electrical connection | To be done by seller, To be done by Consignee himself |
| GENERIC | Waste extraction fittings | To be done by seller, To be done by Consignee himself |
| GENERIC | Civil foundation | No foundation required, Required - To be done by seller, Required - To be done by consignee himself |
| FRAME MATERIAL | Bottom frame material | 35mm X 35mm X 5mm(thick) MS angle for one seater, 75mm X 37.5mm C-channel MS(for 2-seater & 3-seater), 35mm X 35mm X 5mm(thick) SS angle for one seater, 75mm X 37.5mm C-channel SS(for 2-seater & 3-seater), No Bottom frame structure, 25mm X 25mm X 16 gauge MS Sq. pipe and MS angle |
| FRAME MATERIAL | Bottom frame support material | 25mm X 25mm X 3mm(thick) MS angle (for 1-seater, 2-seater & 3-seater), 25mm X 25mm X 3mm(thick) SS angle, No support structure |
| FRAME MATERIAL | Side panel frame material | 35mm X 35mm X 5mm(thick) MS angle, 35mm X 35mm X 5mm(thick) SS angle, No side frame structure, 25 mm x 25 mm x 2 mm (thick) MS pipe as per IS 4923 / latest, 38 mm x 38 mm x 2 mm (thick) MS pipe as per IS 4923 / latest |
| FRAME MATERIAL | Top(roof) frame material | 35mm X 35mm X 5mm(thick) MS angle, 35mm X 35mm X 5mm(thick) SS angle, No roof frame structure, 25 mm x 25 mm x 2 mm (thick) MS pipe as per IS 4923 / latest, 38 mm x 38 mm x 2 mm (thick) MS pipe as per IS 4923 / latest |
| FRAME MATERIAL | Top(roof) support frame structure | 25mm X 25mm X 3mm(thick) MS angle, 25mm X 25mm X 3mm(thick) SS angle, No support structure, 25 mm x 25 mm x 2 mm (thick) MS pipe as per IS 4923 / latest, 38 mm x 38 mm x 2 mm (thick) MS pipe as per IS 4923 / latest |
| FRAME MATERIAL | Partition frame material | 35mm X 35mm X 5mm(thick) MS angle, 35mm X 35mm X 5mm(thick) SS angle, No partition frame structure, 25 mm x 25 mm x 2 mm (thick) MS pipe as per IS 4923 / latest, 38 mm x 38 mm x 2 mm (thick) MS pipe as per IS 4923 / latest |
| FRAME MATERIAL | Ventilation frame material | 25mm X 25mm X 3mm(thick) flat MS, 25mm X 25mm X 3mm(thick) flat SS, No ventilation frame material, 25 mm x 25 mm x 2 mm (thick) MS Flat |
| FRAME MATERIAL | Door frame material | 50mm X 25mm of 14-16gauge rectangular MS hollow pipe, 50mm X 25mm of 14-16gauge rectangular SS hollow pipe, No door frame material, 35 mm x 35 mm x 5 mm (thick) MS ANGLE |
| FRAME MATERIAL | Support material for Door panel fixing | Aluminium U-channel of 18gauge, SS U-channel of 18gauge, No support material |
| FRAME MATERIAL | Door hinges(two numbers) | 75mm size with 1.2-1.5mm thickness MS, 75mm size with 0.6-0.8mm thickness SS, 75mm size with 1.2-1.5mm thickness Chrome plated |
| FRAME MATERIAL | Tank holder frame material | 25mm X 3mm(thick) MS flat, 25mm X 3mm(thick) SS flat, 1125mm X 820mm outer ring(tubular structure)-MS, No Support |
| FRAME MATERIAL | Unit understructure | Supported by 4-legs of size 35mm X 35mm X 5mm MS angle with corner support of 25mm x 25mm X 3mm MS angle for 1-seater, Supported by 4-legs of size 35mm X 35mm X 5mm SS angle with corner support of 25mm x 25mm X 3mm SS angle for 1-seater, Supported by 4-legs of size 75mm X 37mm C-channel MS angle, Supported by 4-legs of size 75mm X 37mm C-channel SS angle, Pedestal base having 890mm X 1065mm X 300mm(height) FRP molded, Supported by 4-legs of size 25 mm x 25 mm x 2 mm (thick) MS pipe with corner support of 25 mm x 25 mm x 2 mm MS pipe as per IS 4923 / latest for 1 - seater, Supported by 4-legs of size 25 mm x 25 mm x 2 mm (thick) MS pipe with central support of 38 mm x 38 mm x 2 mm MS pipe as per IS 4923 / latest for 2 - seater |
| FRAME MATERIAL | Stairs frame material | 25mm x 25mm X 3mm MS angle, 25mm x 25mm X 3mm SS angle, No stairs |
| FRAME MATERIAL | Stairs material | 25mm X 3mm MS flat, 25mm X 3mm SS flat, No stair material |
| FRAME MATERIAL | Door Tee material | 40mm X 40mm x40mm X 5mm(thick) MS Tee, 40mm X 40mm x40mm X 5mm(thick) SS Tee, No door Tee material |
| PANEL MATERIAL | Side panel material | 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm), Single layer 3mm thick FRP, Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA), Outside paneling of 18 gauge MS sheet and inside paneling of 18 gauge aluminum sheet(single partition, corrugated sheet, Fitted with plastic light weight LLDPE roto molded, The superstructure Toilet to be one piece molded plasticwalls and roof with single wall construction by Roto-molded process-fixed on base with suitable fastners-having many nos. of embossed ribs for better strength., Outside panelling of 22 gauge Galvanized plain sheet as per IS 277 / latest and Inside panelling of 10 mm thick Cement fibre board of category 3 Type B confmg. to IS 14862 / latest ( To be 750 mm above the inside floor ), Powder coated 1.2 mm thick Galvanized Iron sheet, Insulated walls to be made of continue line sandwich panels with 0.35mm thick pre-coated steel sheet(PPGI SHEET) having 120 GSM with minimum 4 microns epoxy primer on both sides of sheet and polyester top coat min 15 microns on both sides of PUF with polyurethane foam(PUF) thickenss-38mm having density 40kg/CUM ±2 kg/CUM |
| PANEL MATERIAL | Top(Roof) panel material | 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm), Single layer 3mm thick FRP, Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40-70mm thick taper roof EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA), 4mm poly carbonate sheet fitted on top, Fitted with plastic light weight LLDPE roto molded, The superstructure Toilet to be one piece molded plasticwalls and roof with single wall construction by Roto-molded process-fixed on base with suitable fastners-having many nos. of embossed ribs for better strength., Outside panelling of 22 gauge Galvanized plain sheet as per IS 277 / latest and Inside panelling of 10 mm thick Cement fibre board of category 3 Type B confmg. to IS 14862 / latest, Powder coated 1.2 mm thick Galvanized Iron sheet, Insulated walls to be made of continue line sandwich panels with 0.35mm thick pre-coated steel sheet(PPGI SHEET) having 120 GSM with minimum 4 microns epoxy primer on both sides of sheet and polyester top coat min 15 microns on both sides of PUF with polyurethane foam(PUF) thickenss-38mm having density 40kg/CUM ±2 kg/CUM |
| PANEL MATERIAL | Door panel material | 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm), Single layer 3mm thick FRP, Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated with necessary stiffeners and Aluminium accessories (2 AI handles-1 AI tower bolt-1AI L-drop and steel sheet thickness 0.6mm 275MPA), Outside paneling of 18 gauge aluminum sheet(corrugated sheet), Fitted with plastic light weight LLDPE roto molded, Single leaf shutter to be made out with PUF insulated sandwich panel – Panel to be 0.3mm thick Pre coated G,I. Sheet both side of PUF – Shutter thickness to be 20mm – Door width 600mm and Fixed with Hinges, 22 gauge Galvanized plain sheet as per IS / 277 (latest), Powder coated 1.2 mm thick Galvanized Iron sheet, Insulated walls to be made of continue line sandwich panels with 0.35mm thick pre-coated steel sheet(PPGI SHEET) having 120 GSM with minimum 4 microns epoxy primer on both sides of sheet and polyester top coat min 15 microns on both sides of PUF with polyurethane foam(PUF) thickenss-38mm having density 40kg/CUM ±2 kg/CUM |
| PANEL MATERIAL | partition panel material | 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm), Single layer 3mm thick FRP, Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA), Fitted with plastic light weight LLDPE roto molded, Outside panelling of 22 gauge Galvanized plain sheet as per IS 277 / latest and Inside panelling of 10 mm thick Cement fibre board of category 3 Type B confmg. to IS 14862 / latest ( To be 750 mm above the inside floor ), Powder coated 1.2 mm thick Galvanized Iron sheet, Insulated walls to be made of continue line sandwich panels with 0.35mm thick pre-coated steel sheet(PPGI SHEET) having 120 GSM with minimum 4 microns epoxy primer on both sides of sheet and polyester top coat min 15 microns on both sides of PUF with polyurethane foam(PUF) thickenss-38mm having density 40kg/CUM ±2 kg/CUM |
| PANEL MATERIAL | Floor material | 5mm thick FRP material, 2-3mm thick SS material, Fitted with plastic light weight LLDPE roto molded, Anti skid tile finish floor inside toilet, The double wall constructed ready-made base shall be made out with Plastics material by roto-molded process - PUF to be filled in cavity between two walls for extra load bearing - single piece molded with required outlets - special handle to be provided on two side of toilet block for easily shifting the whole Block, 1.6 - 1.9 mm thick SS 304, 2 - 3 mm thick SS 304 |
| DIMENSION | Cabin size(LXWXH) ± 25mm | 890mm X 840mm X 1980mm (for 1- seater), 915mm X 915mm x 1980mm (for 1- seater), 1780mm X 1680mm X 1980mm(for 2-seater), 1830mm X 1830mm X 1980mm(for 2-seater), 2670mm X 2520mm x 1980mm (for 3-seater), 2745mm X 2745mm x 1980mm (for 3-seater), 1220mm X 915mm X 2055mm(for 1-seater), 915mm X 435mm X 1955mm, 1220mm X 1220mm X 1980mm, 1700mm X 1170mm X 1980mm, 990mm x 838mm x 2286mm, 1700mm x 890mm x 1980mm, 2520mm x 890mm x 1980mm, 3556mm x 1143mm x 1980mm, 2438mm x 1220mm x 1980mm, 1143mm x 890mm x 1980mm, 1778mm x 1143mm x 1980mm, 3660mm x 1220mm x 1980mm, 910mm x 1075mm x 2060mm, 1050 mm x 900 mm x 1980 mm, 1525 mm x 780 mm x 1980 mm (for 1 - seater) |
| DIMENSION | Door size(WxH) ± 20mm | 585mm x 1830mm, 1790mm X 655mm(Steel sheet thickness - 0.6mm 275MPA), 1790 mm x 700 mm (GI sheet thickness 1.2 mm) |
| DIMENSION | Single pan size ± 10mm | 580mm X 440mm with built in platform/footrest, As per buyer's choice |
| DIMENSION | Stairs size ± 10mm | 610mm X 230mm having 1-step, 610mm X 230mm having 2-step, 610mm X 230mm having 3-step, NO stairs |
| DIMENSION | Leg height ±10mm | 455mm, NO legs, 350mm |
| MISC | Door locking bolts | Size 100mm of MS, Size 100mm SS |
| MISC | Towerbolt locking | Towerbolt of MS size 75mm, Towerbolt of SS size 75mm, Towerbolt of Aluminium size 75mm |
| MISC | Overhead tank material | made of double layer HDPE sheet, made of three layer HDPE sheet, Made of PVC, NO tank, Loft type single layer HDPE |
| MISC | Wash basin material | made of FRP(fiber reinforced plastic), made of Ceramic, made of SS 304, No wash basin |
| MISC | WC material | made of FRP(fiber reinforced plastic), made of Ceramic, made of SS 304 |
| MISC | Towel rail/ring | made of plastic, made of SS 304, Chrome plated, NO towel rail |
| MISC | P-trap material | made of HDPE(75mm), made of PVC(75mm) |
| MISC | Footrest(WC) material | made of FRP integrated with Indian WC and floor, made of SS 304 integrated with Indian WC and floor, made of Ceramic integrated with Indian WC and floor, N.A |
| MISC | Sewage tank material | made of FRP 4mm thick(for 2-seater & 3- seater), Twin Leech pit with insepction chamber, NO sewage tank, Hume type Septic tank, As per buyer's choice |
| MISC | Dia of lifting hook | 20mm, 25mm, 30mm, 40mm, NO lifting hook |
| MISC | Size of Mirror | 455mm X 305mm, NO mirror |
| MISC | Electric provision | By mean solar energy, BY mean of battery, By mean of connection from main line, NO electric provision |
| MISC | Base floor surface | To be suitably slanted towards WC for proper drainage(for Indian WC), N.A |
| MISC | Movement facility for 2-seater and 3-seater | Having two axle of 25mm X 25mm with four wheels(250mm each) made of solid rubber, Having two axle of 25mm X 25mm with four wheels(250mm each) made of PVC, N.A |
| WARRANTY | Warranty period in number of years | 1, 2, 3 |
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Live AI
Historical Data
Required Documents
1
Experience Criteria
2
Past Performance
3
Bidder Turnover
4
Certificate (Requested in ATC)
5
OEM Authorization Certificate
6
OEM Annual Turnover *In case any bidder is seeking exemption from Experience / Turnover Criteria
7
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Similar Tenders
5 found
Urgent
Sangli District Panchayats Portable Toilet Tender 2026 Maharashtra ISI/AAA/TRTL Compliant Procurement
Sangli District Panchayats
📍 SANGLI, MAHARASHTRA
⏰ Deadline: 2 days left
🛒 Type: Goods
View
GEM
Portable Toilet
Indian Army
📍 AGRA, UTTAR PRADESH
⏰ Deadline: 2 weeks left
🛒 Type: Goods
View
GEM
Urgent
Portable Toilet
City Municipal Council Hosapete Karnataka
📍 BELLARY, KARNATAKA
EMD: ₹62,500
Est: ₹25.0 L
⏰ Deadline: 6 days left
🛒 Type: Goods
View
GEM
Urgent
Indian Army Portable Toilet Tender Bareilly Uttar Pradesh 2026 - Installation, Commissioning & Frame Panel Specifications
Indian Army
📍 BAREILLY, UTTAR PRADESH
⏰ Deadline: 3 days left
🛒 Type: Goods
View
GEM
Portable Toilet
E-municipalities - Eservices To Citizens And Employees Of Urban Local Bodies Of Uttar Pradesh
📍 AURAIYA, UTTAR PRADESH
Est: ₹11.0 L
⏰ Deadline: 3 weeks left
🛒 Type: Goods
View
GEM
Explore More Opportunities
Quick Access
Unlock Tender Documents
Sign up now to access all documents
Performance Analytics
7-metric analysis with year-wise breakdown
Competitor Intelligence
Multi-dimensional analysis across 6 parameters
Market Penetration
By department, ministry, geography & category
Historical Analysis
Complete tender history with results
Documents 4
GeM-Bidding-9447539.pdf
Main Document
CATALOG-Specification-1
CATALOG Specification
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS