TenderDekho Logo
GEM

Water Tender Fire Brigade IS 950 Bilaspur Chhattisgarh Procurement 2026

Bid Publish Date

15-Jan-2026, 5:44 pm

Bid End Date

14-Feb-2026, 5:00 pm

EMD

₹1,00,000

Location

BILASPUR , CHHATTISGARH

Progress

Issue15-Jan-2026, 5:44 pm
AwardPending
Explore all 4 tabs to view complete tender details

Quantity

1

Bid Type

Two Packet Bid

Key Highlights

  • • IS 950 compliance for fire brigade water tender design and performance
  • • Mandatory OEM warranty and chassis warranty terms
  • • Option clause allowing 25% quantity variation during/after contract
  • • OEM authorization and integrity pact as part of submission
  • • Data sheet alignment with technical parameters; risk of rejection for mismatches
  • • Delivery/install at Nagar Palika Parishad, Lormi, CG 495115 with installation by OEM-certified personnel
  • • EMD amount of ₹100,000; no BOQ items listed
  • • Emission compliance and high/low pressure pump capacity specifications

Tender Overview

Bilaspur, Chhattisgarh invites procurement of a Water Tender for Fire Brigade Use conforming to IS 950 with EMD ₹100,000. The project targets delivery within the terms of IS 950 requirements, including high and low pressure fire pump capacity, water tank capacity, and mandatory accessories. The tender emphasizes OEM warranty, chassis warranty, and installation/commissioning by OEM-certified personnel. Key differentiators include strict IS 950 clause adherence, mandatory data sheet upload, and integrity pact compliance. The package is positioned for municipal water-tender modernization with emphasis on compliance and traceability.

Technical Specifications & Requirements

  • Governing Specification: IS 950 compliance for design, construction, and functional performance.
  • Chassis Parameters: Maximum gross vehicle weight (including crew, water, equipment); axle configuration; maximum engine output (kW); vehicle emission compliance; seating capacity; driver cabin air conditioning.
  • Functional Requirements: Water tank material and capacity (litres); high and low pressure fire pump capacity; baffles & manhole; water tank construction; colour/paint; mandatory accessories per clause 7*2; warranty terms for chassis and all OEM-provided equipment.
  • Warranty: Chassis warranty in years; equipment/ accessories warranty per OEM policy.
  • Delivery/Installation: Installation and commissioning by OEM-certified resources; end-user installation at Nagar Palika Parishad, Lormi (Mungeli, CG 495115) as per T&C.
  • Data/Documentation: Data sheet submission; compliance with emission and performance parameters per IS 950 clause 3*2.

Terms, Conditions & Eligibility

  • EMD: ₹100,000 (to be paid as specified in tender terms).
  • Experience: Minimum 3 years in supplying/manufacturing same or similar category products to Central/State Govt bodies; OEM or authorized resellers may qualify; copies of contracts to be submitted.
  • Delivery: Delivery schedule aligned to last date of original delivery order with option to extend per clause 2; extended time calculations apply with minimum 30 days.
  • Documentation: GST, PAN, experience certificates, financial statements, EMD documents, OEM authorizations, and data sheets; integrity pact signed and uploaded.
  • Installation/Support: OEM-certified resources to handle installation, testing, and training; End User Certificate per buyer format if requested.

Key Specifications

  • IS 950 compliant water tender with specified pump capacity

  • Water tank capacity (litres) and tank material specification

  • Chassis maximum gross vehicle weight and axle configuration

  • Maximum engine output (kW) and vehicle emission standards

  • Seating capacity including driver and air conditioning in driver cabin

  • Mandatory accessories as per clause 7*2 of IS 950

  • Warranty: chassis and OEM equipment warranty terms

  • Installation/commissioning by OEM-certified personnel

Terms & Conditions

  • EMD ₹100,000; bid submission must include EMD proof

  • 3 years’ experience in govt/PSU supply of similar products

  • Delivery and installation to Nagar Palika Parishad Lormi, CG

Important Clauses

Payment Terms

EMD and payment terms as per buyer terms; delivery may be extended with option clause up to 25% quantity variation

Delivery Schedule

Delivery starts after original delivery order; time extension rules apply; minimum 30 days extension threshold

Penalties/Liquidated Damages

Clauses refer to timely delivery and performance as per IS 950; LDs may apply as per contract terms

Bidder Eligibility

  • Regularly manufactured and supplied similar Category Products to Govt/PSU for 3 years

  • Non-liquidation and no court receivership; supporting undertaking

  • OEM authorization or direct OEM supply capability

Past Similar Tenders (Historical Results)

5 found

Indian Army Stationary Storage Type Electric Water Heaters ISI Marked IS 2082 Tender Meerut Uttar Pradesh 2025

Indian Army

MEERUT, UTTAR PRADESH

Posted: 5 January 2026
Closed: 12 January 2026
GEM

Employees State Insurance Corporation Single Use Sterile Rubber Surgical Gloves Tender IS 13422 Q2 2025

Employees State Insurance Corporation

Posted: 26 December 2025
Closed: 12 January 2026
GEM

North Eastern Railway ISI Marked Geysers Tender 2026 - IS 2082, BEE Star, 3-Year Warranty

North Eastern Railway

BAREILLY, UTTAR PRADESH

Posted: 7 January 2026
Closed: 12 January 2026
GEM

Employees State Insurance Corporation IS 13422 Single Use Sterile Rubber Gloves Tender 2025 in India

Employees State Insurance Corporation

Posted: 27 December 2025
Closed: 12 January 2026
GEM

Water Fittings - Copper Alloy Float Valves (Horizontal Plunger Type) as per IS: 1703,Copper alloy T

Indian Army

AGRA, UTTAR PRADESH

Posted: 30 December 2025
Closed: 9 January 2026
GEM

Technical Specifications 1 Item

Item #1 Details

View Catalog
Category Specification Requirement
Certification Parameters Governing Specification IS 950
Chassis Parameters Maximum Gross Vehicle Weight including crew, water and equipment 18500.0 - 40000.0 Or higher
Chassis Parameters Axle Configuration 4 X 2
Chassis Parameters Maximum Engine Output / Power (kW) at rated RPM 164.7 - 400.0 Or higher
Chassis Parameters Vehicle Emission Compliance BS VI
Chassis Parameters Performance Parameters (as per clause 3*2 of IS 950) 1. Maximum speed on level road (fully laden) - 72 km/h; 2. Acceleration from a standing start through the gears (fully laden) - 64 km/h in 55 s; 3. The appliance shall be capable of being started from rest on a gradient of 1 to 4; 4. When travelling at 48 km/h on a level dry surface the foot brake shall be capable of stopping the vehicle within a distance of 15 m from the point at which the brake is applied. The hand brake shall be capable of holding the fully laden appliance on a dry surface gradient of 1 in 4 when in neutral gear.
Chassis Parameters Seating Capacity in the cabin (Including driver) 6
Chassis Parameters Air Conditioning in Driver Cabin No
Functional Requirements Design and Construction (As per clause 5 of IS 950) Engine as per clause 5.1, Electrical System as per clause 5.2, Water Tank as per clause 5.3, Hose Reels as per clause 5.4, Pump as per clause 5.5, Suction Inlet and Delivery Valves as per clause 5.6, Primer as per clause 5.7, Pipelines and Valves as per clause 5.8, Control Panel as per clause 5.9, Water/Foam Monitor as per clause 5.10, Body Work and Stowage as per clause 5.11, Miscellaneous as per clause 5.12, Provision for Stowage of Equipments as per clause 5.13, Cable Winch as per clause 5.14, Telescopic Light Mast or Inflatable Emergency Lighting System as per clause 5.15, Alternator Unit as per clause 5.16, Ladder Gallows as per clause 5.17, Tool-Kit Container as per clause 5.18, Stability as per clause 5.19 of IS 950.
Functional Requirements High and low pressure fire pump capacity 2000 litre/min at 0.7 MPa and 300 litre/min at 3.5 MPa capacity
Functional Requirements Material as per clause 4 of IS 950 1. Material of Pump casing and low pressure impeller, Impeller ring and impeller neck ring - Lead tin bronze (Grade LTB 2 of IS 318); 2. Material of Pump shaft - Stainless steel (Grade 04Cr18Ni10 of IS 6603); 3. Material of Pump panel - Aluminium sheets/chequered plates (IS 737) or Mild steel sheets (IS 513); 4. All parts which form water ways or come into contact with water - stainless steel
Functional Requirements Water Tank Material 1. Mild steel treated for anti-corrosion shall be suitably mounted on the chassis in a manner keeping in view the proper load distribution on the axles. 2. The mild steel plates used for the tank shall be zinc plated or galvanized and shall be given adequate anti-corrosive treatment of epoxy treatment consisting of one coat of primer with two coats of finish after preparing the surface by sand blasting from inside and outside after fabrication if it is not galvanized.
Functional Requirements Water Tank Capacity (litre) 6000.0 - 7000.0 Or higher
Functional Requirements Baffles & Manhole 1. Minimum 2 numbers of baffles fitted longitudinally and 2 numbers of baffles fitted transversely to prevent surge when the vehicle is breaking, cornering or accelerating. 2. The tank body and baffles shall be of minimum 5 mm thick mild steel plates. 3. Bolted manhole of 450 mm diameter minimum and shall have a gun metal threaded ring and cap of 300 mm diameter for filling the water tank from the top. 4. The manhole cover shall be made from 5 mm thick mild steel plate and epoxy coated from inside and outside. A cleaning hole of at least 250 mm diameter shall also be provided at the bottom.
Functional Requirements Colour and Paint Fire red colour conforming to Shade No. 536 of IS 5. The paint shall conform to IS 2932.
Functional Requirements Mandatory Accessories as per clause 7*2 of IS 950 Fire bell of 250 mm diameter, 2 nos Head lamps, 2 nos Fog lamps, Reversing light, Amber blinkers lights, Trafficators, Wind screen wipers, Tools required for normal routine maintenance of the appliance, battery operated siren, Search light, Spot light, Inspection lamp, Tail lamps, Rear reflectors, (Cab, instrument panel and locker, light), Public address system
Functional Requirements Miscellaneous 1. A suitable bumper shall be provided at the rear rigidly fixed to the super structural members by means of nuts and bolts, fabricated from 100 mm × 50 mm × 5 mm mild steel channel. 2. Two cat ladders made out of stainless steel round or square pipe of 25 mm diameter shall be provided. 3. Two numbers of 25 mm diameter aluminum pipe railing with sufficient number of aluminum double socket brackets shall be provided to the rear body over the deck. 4. A heavy duty towing hook shall be provided and fitted the rear bumper by means of nuts and bolts. 5. Quick removable type wire mesh guard made from 25 mm × 25 mm size mild steel wire mesh of 1.6 mm covered in mild steel angle frame shall be provided to all the glasses of driver-cum-crew cabin.
Warranty Chassis Warranty (Years) 1, 2, 3 Or higher
Warranty Equipment and accessories are provided with applicable OEM warranty Yes

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI
Historical Data

Required Documents

1

GST registration certificate

2

Permanent Account Number (PAN) card

3

Experience certificates showing 3 years in similar Govt/PSU supply

4

Financial statements (last 3 years) or equivalent financial proof

5

EMD submission proof (₹100,000)

6

Data Sheet of offered water tender/vehicle

7

Manufacturer/ OEM authorization (if bidding via reseller)

8

Integrity Pact signed and uploaded

9

End User Certificate if requested by Buyer

Frequently Asked Questions

Key insights about CHHATTISGARH tender market

How to bid on IS 950 water tender in Bilaspur?

Bidders must meet 3-year govt supply experience, submit Data Sheet, OEM authorization, and Integrity Pact; provide GST, PAN, financials, and EMD ₹100,000. Ensure IS 950 conformity and installation by OEM-certified personnel; deliver to Nagar Palika Parishad Lormi within specified schedule.

What documents are required for the Bilaspur water tender?

Submit GST, PAN, 3-year govt/PSU experience certificates, 3-year financial statements, EMD proof of ₹100,000, Data Sheet, OEM authorization, Integrity Pact, End User Certificate if requested, and installation plan from OEM-certified team.

What are the IS 950 standards referenced in this bid?

The tender requires IS 950 compliance for design, construction, water pump capacity, water tank materials, baffles/manholes, paint, and performance parameters; ensure warranty commitments align with OEM terms and testing per clause 3*2.

What is the delivery location for installation?

Installation, commissioning, and testing are to be carried out at Nagar Palika Parishad, Lormi, District Mungeli, CG 495115, by OEM-certified resources as indicated in the terms.

What is the EMD amount for the Bilaspur tender?

The bid requires a mandatory EMD of ₹100,000 to accompany the bid submission; ensure payment method complies with tender guidelines and includes the payment reference in the bid package.

What warranty provisions are expected for the water tender?

Bidders must provide chassis warranty for a defined period and ensure OEM warranty on equipment/accessories; verify exact warranty durations in the data sheet and attach OEM warranty certificates with the bid.

What are the key technical requirements to meet for the pump and tank?

Provide high/low pressure pump capacity details, water tank capacity in litres, tank material specification, and compliance with IS 950 design clauses; include baffles and manhole details and reflect colour/paint as per clause 5.

How does the quantity variation option affect delivery timelines?

The buyer may increase/decrease quantity up to 25% at contract award or during currency; delivery time extension uses a formula ((increased/original) × original period) with a 30-day minimum.

Similar Tenders

5 found

Bid for (A) Contract for procurement of Water Bouser & Mini Fire Tender and (B) Comprehensive operation and maintenance of fire tender/water bouser and to cope up other emergency situation (covering training, precautionary steps and handling emergency situation) for 749 MW Gujarat Solar Park at village-Charanka Taluka-Santalpur, District- Patan, Gujarat.

Gujarat Power Corporation Limited

📍 GANDHINAGAR, GUJARAT

⏰ Deadline: 2 months left
🛒 Type: Service
View NPROCURE

Single Use Sterile Hypodermic Syringes for Human Use Conforming to IS 10258 (Part 1),Over-Needle Pe

Hindustan Aeronautics Limited (hal)

📍 KORAPUT, ODISHA

⏰ Deadline: 4 weeks left
🛒 Type: Goods
View GEM

Chhattisgarh Women & Child Development Department Composite Office Tables & Metal Shelving Racks Tender Raipur 2026 IS 8126 IS 1883

N/a

📍 RAIPUR, CHHATTISGARH

EMD: ₹7.4 L
⏰ Deadline: 3 weeks left
🛒 Type: Goods
View GEM

Composite Office Tables conforming To Is 8126 (V2),Metal Shelving Racks (Adjustable Type) conformin

N/a

EMD: ₹7.4 L
⏰ Deadline: 3 weeks left
🛒 Type: Goods
View GEM

Deltamethrin Water Dispersible Powder (WP) (V2)  Conforming to IS 13457

Orissa State Ware Housing Corporation

📍 KHORDHA, ODISHA

EMD: ₹50,000
⏰ Deadline: 3 weeks left
🛒 Type: Goods
View GEM