Procurement Opportunity: Almirah small HH HS,Bin Soil linen multipurpose,Board Notice,Chair writing.,Chair dining Officers., in SOUTH ANDAMAN, ANDAMAN & NICOBAR

Almirah small HH HS. 1mm thick MS sheet shall be used to manufacture Almirah except legs. Two Legs shall be provided to almirah as shown on drawing and shall be of 1.25 mm thick MS sheet. Cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters, Almirah shall be fitted with ISI marked 75mm 6 lever lock with three way locking system. Front shutters shall have two leaves of equal size. Almirah shall be finished with (shade of TA gray colour or as approved GE both internaly and externaly) two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as specified/ shown in drawing and directed by Enginer-in-Charge.Drg No FD-1034

Board Notice (900x1200mm). As per trade pattern. Drg NoTP

Chair dining Officers. All wood shall seasoned first class teak wood free from knots and defects.Hard Nylon buffers shall be fixed at the bottom of legs with brass screws Seat made of 12mmm thick BWR grade plywood over which 40 density foam 75mm thick shall be provided duly covered with best quality tapestry cloth as approved by GE. 50 x 50 x 20 mm and 3mm thick SS right angle bracket between leg and rails fixed with steel screws 8 nos in one chair.All wooden surface shall be french polished with glossy finish, shade as approved by GE.Rest all as specified/ shown in drawing and directed by Engineer-in-Charge.Drg No FD/MAP-II/04

Ladder aluminium. The ladder shall be of Aluminium having wall thickness 3.18mm .Each rung shall be of 23mm dia aluminium pipe with wall thickness not less than 2.43mm and shall be eight in nos at equidistant space of 300mm in between as shown in drg.The stringer of ladder shall be 31.75mm wide and 3.18mm thick .Each alumnium pipe rung of 23 mm dia shall be fitted inside the stringer with end bend to shape and each rung on both sides shall be provided with hard rubber cap. Hard rubber caps/shoes shall be fixed at the ends of aluminium rungs and stringers. Rest all as specified / shown in drawing and directed by Engineer-in-Charge.Drg No FD-1025

Table Bed Side. Top, sides and front shall be 18mm thick exterior grade MDF board one side laminated, as approved by GE, duly covered with 4mm thick half round teak wood beading in matching shade with synthetic adhesive (Fevicol SH). Both drawer shall be 12mm thick BWR grade plywood and shall be supported with telescopic channel for smooth functioning. All steel surface shall be finished with (Black colour or as approved GE) two coats of synthetic enamel paint upto obtaining glossy finishng over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper Rest all as specified/ shown in drawing and directed by Enginer-in-Charge.Drg No FD/E6/MAP/15 (R)

Table office Clk Steel. Top shall be 18 mm thick exterior grade pre laminated MDF board one side laminated in light Wallnut shade or as approved by BSO/GE, duly covered with 4 mm thick half round teak wood beading in matching shade with synthetic adhesive(Fevicol SH). with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper in black colour. Rest all as specified/ shown in drawing and directed by Enginer-in-Charge.Drg No FD-1004

Bed hard. All Steel member shall be 18 Gauge MS pipe. The frame of head board and foot board shall be of 38mm MS square pipe.18mm MS square pipe shall be provided in the inner of head/foot board frame as shown in drg. 18mm thick both side prelaminated MDF board of walnut shade with 4mm thick teakwood beading shall be screwed to MS strip arc welded with 18mm thick square pipe with standard workmanship both in head/foot board. One stiffener of size 25mmx25mm shall be welded between the two legs of head board over 150mm from the ground level. The top of bed hard shall be of 12mm thick BWR grade plywood of approved make fixed over the four equidistant stiffener of size 25mmx25mm SQ MS pipe in line with bottom of 25x65mm long rail section. PVC shoes shall be provided to legs of bed. All steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. Rest all as per drawing. Drg NoFD/E6/MAP/08 (R)

Bath Stool PVC. As per trade pattern. Drg NoFD/E6/MAP/07