Get OEM Verified in 20 Days

GeM OEM Panel Approval — Apply before 1st July

GEM

Invitation to Bid - Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Bid Publish Date

25-Jun-2026, 12:26 pm

Bid End Date

06-Jul-2026, 1:00 pm

WhatsApp Generate Docs

Progress

Issue25-Jun-2026, 12:26 pm

AwardPending

Explore all 4 tabs to view complete tender details

Quantity

2224

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

Bid To RA Enabled

Yes

Item Category

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3) , Towel Rail (Q3) , Towel Ring (Q3) , Bathroom Water Shower (V2) (Q3) , Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3) , Ceramic ( Vitreous China ) Flushing Cisterns for Water Closets and Urinals conforming to IS 774 (Q3) , Bathroom or Toilet Mirror (V3) (Q4) , Stainless Steel Shelf Rack (Q3) , Connector Pipes for Washbasins/ Sinks/ Geyser (Q3) , Plastic Seats and Covers for Water - Closets as per IS 2548 (Q3) , Flexible Drain Hoses for Wash Basins/ Sinks (Q3) , Metal Alloy Casting Water Tap with Aerator (V2) (Q3) , Floor Drain Traps (V2) (Q3) , Stainless Steel Sinks for Domestic Purposes (V3) as per IS 13983 (Q2)

Authority Records

MINISTRY OF DEFENCEMILITARY AFFAIRS DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 50

GeM-Bidding-9446793.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

CATALOG-Specification-10

CATALOG Specification

CATALOG-Specification-11

CATALOG Specification

CATALOG-Specification-12

CATALOG Specification

CATALOG-Specification-13

CATALOG Specification

CATALOG-Specification-14

CATALOG Specification

CATALOG-Specification-15

CATALOG Specification

CATALOG-Specification-16

CATALOG Specification

CATALOG-Specification-17

CATALOG Specification

CATALOG-Specification-18

CATALOG Specification

CATALOG-Specification-19

CATALOG Specification

CATALOG-Specification-20

CATALOG Specification

CATALOG-Specification-21

CATALOG Specification

CATALOG-Specification-22

CATALOG Specification

CATALOG-Specification-23

CATALOG Specification

CATALOG-Specification-24

CATALOG Specification

CATALOG-Specification-25

CATALOG Specification

CATALOG-Specification-26

CATALOG Specification

CATALOG-Specification-27

CATALOG Specification

CATALOG-Specification-28

CATALOG Specification

CATALOG-Specification-29

CATALOG Specification

CATALOG-Specification-30

CATALOG Specification

CATALOG-Specification-31

CATALOG Specification

CATALOG-Specification-32

CATALOG Specification

CATALOG-Specification-33

CATALOG Specification

CATALOG-Specification-34

CATALOG Specification

CATALOG-Specification-35

CATALOG Specification

CATALOG-Specification-36

CATALOG Specification

CATALOG-Specification-37

CATALOG Specification

CATALOG-Specification-38

CATALOG Specification

CATALOG-Specification-39

CATALOG Specification

CATALOG-Specification-40

CATALOG Specification

CATALOG-Specification-41

CATALOG Specification

CATALOG-Specification-42

CATALOG Specification

CATALOG-Specification-43

CATALOG Specification

CATALOG-Specification-44

CATALOG Specification

CATALOG-Specification-45

CATALOG Specification

CATALOG-Specification-46

CATALOG Specification

CATALOG-Specification-47

CATALOG Specification

CATALOG-Specification-48

CATALOG Specification

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

Indian Army ISI & IS 8931 Copper Alloy Taps Valves Procurement 2025

Indian Army

KAPURTHALA, PUNJAB

Posted: 25 October 2025

Closed: 6 November 2025

GEM

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Indian Army

FIROZPUR, PUNJAB

Posted: 14 August 2025

Closed: 21 August 2025

GEM

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Indian Army

WEST TRIPURA, TRIPURA

Posted: 11 August 2025

Closed: 29 August 2025

GEM

Indian Army MeErut Uttar Pradesh Copper Alloy Taps & Bathroom Fixtures Tender 2025 IS 8931 IS 1703 BIS

Indian Army

MEERUT, UTTAR PRADESH

Posted: 7 January 2026

Closed: 17 January 2026

GEM

Indian Army Copper Alloy Taps & Water Fittings Tender 2025 IS 8931 IS 1703 IS 778

Indian Army

PITHORAGARH, UTTARAKHAND

Posted: 10 December 2025

Closed: 20 December 2025

GEM

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 1 Bib tap
Type	Dimension	As per table 4 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Stainless steel sheet
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Neoprene rubber
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Category	Specification	Requirement
Material & Dimensions	Rail Material	Stainless Steel (SS 202)
Material & Dimensions	Mounting Bracket Material	Stainless Steel (SS 202)
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	450 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	16 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Single Bar
Design & Configuration	Bar Shape of Rail	Square
Load & Performance	Recommended Load Capacity (in kg)	Up to 3 kg
Fixing & Accessories	Fixing Hardware Included	Yes
Fixing & Accessories	Fasteners Material	Galvanized Steel

Category	Specification	Requirement
Generic	Ring Shape	Circular
Material & Dimensions	Ring Material	Brass
Material & Dimensions	Mounting Bracket Material	Brass
Material & Dimensions	Inner Diameter of Ring (in mm) (Tolerance : ± 10 mm)	140 mm
Material & Dimensions	Ring Rod Thickness (in mm) (Tolerance : ± 10 mm)	6 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	50 mm
Material & Dimensions	Mounting Plate Size (in mm)	40 mm
Design & Configuration	Ring Movement Type	Swing Ring
Load & Performance	Recommended Load Capacity (in kg)	Up to 2 kg
Fixing & Accessories	Fixing Hardware Included	Yes
Fixing & Accessories	Fasteners Material	Stainless Steel

Category	Specification	Requirement
Material & Dimensions	Rail Material	Stainless Steel (SS 304)
Material & Dimensions	Mounting Bracket Material	Stainless Steel (SS 304)
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	600 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	19 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Folding Rail
Design & Configuration	Bar Shape of Rail	Round
Load & Performance	Recommended Load Capacity (in kg)	Up to 3 kg
Fixing & Accessories	Fixing Hardware Included	Yes
Fixing & Accessories	Fasteners Material	Stainless Steel

Category	Specification	Requirement
Material & Dimensions	Rail Material	PVC Plastic
Material & Dimensions	Mounting Bracket Material	PVC Plastic
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	600 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	22 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Single Bar
Design & Configuration	Bar Shape of Rail	Flat
Load & Performance	Recommended Load Capacity (in kg)	Up to 3 kg
Fixing & Accessories	Fixing Hardware Included	Yes
Fixing & Accessories	Fasteners Material	Plastic

Category	Specification	Requirement
Type	Type of shower	Overhead shower (Wall mount with shower arm)
Type	Material of body/face plate	ABS
Type	Finish of face plate	White matt
Type	Type of Water Flow	Only Rainfall
Type	Type of Multiple flow	NA
Type	Shape of Shower	Round
Dimensions	Size of Shower	75 mm
Dimensions	Overall length of Hand Shower (in mm)	NA
Dimensions	Length of Hand Shower Tube (in mt)	NA
Dimensions	Diameter of Hand Shower Tube (in mm)	NA
Dimensions	Material of Hand Shower Tube	NA
Dimensions	Overall length of Shower Arm (in mm)	200
Warranty	Warranty (in Years)	1

Category	Specification	Requirement
Type	Type of shower	Hand Shower
Type	Material of body/face plate	ABS
Type	Finish of face plate	Chrome plated
Type	Type of Water Flow	Only Rainfall
Type	Type of Multiple flow	NA
Type	Shape of Shower	Rectangular
Dimensions	Size of Shower	65x 95 mm
Dimensions	Overall length of Hand Shower (in mm)	200
Dimensions	Length of Hand Shower Tube (in mt)	1.5
Dimensions	Diameter of Hand Shower Tube (in mm)	8
Dimensions	Material of Hand Shower Tube	Stainless Steel
Dimensions	Overall length of Shower Arm (in mm)	NA
Warranty	Warranty (in Years)	2

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	15 mm
Generic	Pressure Classification	Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Generic	Gate Valve Type	Solid Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet integral seats
Material & Manufacture	Material of Body	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Bonnet/Cover Material	Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Stem, hinge pin and plug	Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	9.5 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	3.7 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	11.5 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	8 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	26 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	As per Table 11 of IS 778

Category	Specification	Requirement
Generic	Conformity to IS 774	Yes
Generic	Flushing Device	Cistern
Construction & Material	Material for Flush Pipe	Polyethylene Pipe (Conformity to Is 4984)
Construction & Material	Material for Overflow Pipe	Polyethylene Pipe (Conformity to Is 4984)
Construction & Material	Cistern Discharge Capacity	Full Flush (6 ± 0.5 liters) Reduced Flush (3 ± 0.5 liters)

Category	Specification	Requirement
Generic	Type of Mirror	Decorative Mirror
Generic	Mirror Shape	Rectangular
Generic	Type of Mirror Coating	Silver Coated
Generic	Frame	With
Generic	Frame Material	Plastic
Generic	Frame Color	White
Generic	Mirror Mounting / Fixing System	Wall Hanging System (Hook/Hanger)
Dimensions	Width/Diameter of Mirror (inch)	>15 to ≤20
Dimensions	Height/Diameter of Mirror (inch)	>20 to ≤25
Dimensions	Thickness of Mirror (mm)	>4 to ≤4.5

Category	Specification	Requirement
GENERIC	Configuration	With 4-Shelf (including top shelf)
GENERIC	Shape of support structure	Round hollow type
GENERIC	Ground clearance (mm)	25 mm
GENERIC	Mode of supply	Knocked Down To Be Assembled At Consignee Site By Consignee Himself
MATERIAL & MATERIAL THICKNESS	Shelf material	Stainless Steel Grade 304 galvanized
MATERIAL & MATERIAL THICKNESS	Shelf material thickness	0.6 mm
MATERIAL & MATERIAL THICKNESS	Support structure material	Stainless Steel Grade 304 galvanized
MATERIAL & MATERIAL THICKNESS	Support structure material thickness	0.6 mm
DIMENSION	Width of shelf rack ± 10 mm	915 mm
DIMENSION	Depth of shelf rack ± 10 mm	405 mm
DIMENSION	Height of shelf rack ± 10 mm	1220 mm
DIMENSION	Height of support structure ± 10 mm	1245 mm
DIMENSION	Size of support structure	30 mm x 30 mm
WARRANTY	Warranty period	1 - Year
CERTIFICATION	Test report to be furnished to buyer on demand	Yes

Category	Specification	Requirement
Material & Construction	Inner Pipe Material	Silicone Rubber, PVC
Material & Construction	Cover Material	PVC Outer Cover
Dimensions	Nominal Bore Size (in mm)	12 mm
Dimensions	End Connection Size (in inch)	½ inch,, ¾ inch, ⅜ inch
Dimensions	Pipe Length (Tolerance: ±10 mm)	900 mm
End Connections & Fittings	End Connection Type (Material to be supplied alonwith)	Push‑Fit Quick Connect
End Connections & Fittings	End Fitting Material	PTMT (Polytetra Methylene Terephthalate)
End Connections & Fittings	Surface Finish	None
End Connections & Fittings	Washer / Gasket Included	No
Performance & Usage	Maximum Working Pressure (in bar)	Up to 10 bar
Performance & Usage	Operating Temperature Range (in °C)	Up to 40°C
Performance & Usage	Durability Grade	Light Duty

Category	Specification	Requirement
Material	Materials of Seat and Covers	Polypropylene
Material	Materials of Hinging Device	Suitable Plastic(with reinforcement)
RIGIDITY	Seat	Grade 1
RIGIDITY	Cover	Grade 1

Category	Specification	Requirement
Generic	Installation Type	Threaded
Material & Construction	Hose Material	PVC
Material & Construction	Reinforcement Type	Unreinforced
Material & Construction	Flexibility Type	Smooth Bore
Dimensions	Nominal Bore of Hose (in mm)	32 mm
Dimensions	Hose Length in meter (Tolerance : ± 10 mm)	1 meter
Dimensions	Wall Thickness (in mm)	1 mm
Performance & Usage	Durability Grade	Light Duty
Basin / Sink Connection Fitting (Waste Coupling)	Connection Fitting Included	No
Basin / Sink Connection Fitting (Waste Coupling)	Type of Connection Fitting	NA
Basin / Sink Connection Fitting (Waste Coupling)	Fitting Material	NA
Basin / Sink Connection Fitting (Waste Coupling)	Washer / Gasket Material	NA

Category	Specification	Requirement
Generic	Type of Mirror	Plain Mirror
Generic	Mirror Shape	Rectangular
Generic	Type of Mirror Coating	Silver Coated
Generic	Frame	With
Generic	Frame Material	Stainless Steel
Generic	Frame Color	Silver
Generic	Mirror Mounting / Fixing System	Clamp Support
Dimensions	Width/Diameter of Mirror (inch)	>15 to ≤20
Dimensions	Height/Diameter of Mirror (inch)	>20 to ≤25
Dimensions	Thickness of Mirror (mm)	>4 to ≤4.5

Category	Specification	Requirement
Material & Construction	Inner Pipe Material	Stainless Steel (Corrugated)
Material & Construction	Cover Material	Nylon Braided
Dimensions	Nominal Bore Size (in mm)	12 mm
Dimensions	End Connection Size (in inch)	½ inch,, ¾ inch, ⅜ inch
Dimensions	Pipe Length (Tolerance: ±10 mm)	450 mm
End Connections & Fittings	End Connection Type (Material to be supplied alonwith)	Nut–Nut
End Connections & Fittings	End Fitting Material	Brass
End Connections & Fittings	Surface Finish	None
End Connections & Fittings	Washer / Gasket Included	No
Performance & Usage	Maximum Working Pressure (in bar)	Up to 10 bar
Performance & Usage	Operating Temperature Range (in °C)	Up to 40°C
Performance & Usage	Durability Grade	Medium Duty

Category	Specification	Requirement
ITEM	Tap Mounting Type	Disc tap
Material	Material	Brass
Description	Type of Faucet	Half Turn
Description	Aerator Material	Metal
Dimension	Nominal Thread Size of Tap (mm)	15

Category	Specification	Requirement
ITEM	Tap Mounting Type	Cartidge tap
Material	Material	Bronze
Description	Type of Faucet	Hand-held
Description	Aerator Material	Plastic
Dimension	Nominal Thread Size of Tap (mm)	25

Category	Specification	Requirement
Generic	Material	PVC
Design & Construction	Trap Seal Depth (in mm)	25 mm
Design & Construction	Removable Grating	No
Design & Construction	Anti-Insect Feature	No
Design & Construction	Anti-Odor Feature	No
Design & Construction	Corrosion Resistance	Yes
Dimensions	Overall Size (Length x Breadth x Height) in mm	100 mm x 100 mm x 75 mm
Performance	Flow Rate Capacity	Medium Duty

Category	Specification	Requirement
Standards	Confirmity to standard IS 13983 and ISI Marked	Yes
Types and Specification	Type of Bowl	Rectangular
Types and Specification	Type of Sink built in counter shall be as per clause 4 Of IS 13983	Single bowl without drainer
Types and Specification	Material used stainless steel of Grade Designation used as per clause 5 of IS 13983	SS 304 Or higher
Types and Specification	Sinks shall be provided, in one of the following conditions as per clause 7.5 of IS 13983	Without tap holes
Test Report	Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification	Yes
Test Report	Test Report to be furnished to the buyer on demand	Yes

Browse Tenders

Categories

States

Cities

Authorities

Invitation to Bid - Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Categories 35

Additional Tender Data

Commercial Details

Authority Records

BID & GeM Expert Consultancy

Documents 50

GeM-Bidding-9446793.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13

CATALOG-Specification-14

CATALOG-Specification-15

CATALOG-Specification-16

CATALOG-Specification-17

CATALOG-Specification-18

CATALOG-Specification-19

CATALOG-Specification-20

CATALOG-Specification-21

CATALOG-Specification-22

CATALOG-Specification-23

CATALOG-Specification-24

CATALOG-Specification-25

CATALOG-Specification-26

CATALOG-Specification-27

CATALOG-Specification-28

CATALOG-Specification-29

CATALOG-Specification-30

CATALOG-Specification-31

CATALOG-Specification-32

CATALOG-Specification-33

CATALOG-Specification-34

CATALOG-Specification-35

CATALOG-Specification-36

CATALOG-Specification-37

CATALOG-Specification-38

CATALOG-Specification-39

CATALOG-Specification-40

CATALOG-Specification-41

CATALOG-Specification-42

CATALOG-Specification-43

CATALOG-Specification-44

CATALOG-Specification-45

CATALOG-Specification-46

CATALOG-Specification-47

CATALOG-Specification-48

GEM General Terms and Conditions Document

Past Similar Tenders (Historical Results)

Indian Army ISI & IS 8931 Copper Alloy Taps Valves Procurement 2025

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Indian Army MeErut Uttar Pradesh Copper Alloy Taps & Bathroom Fixtures Tender 2025 IS 8931 IS 1703 BIS

Indian Army Copper Alloy Taps & Water Fittings Tender 2025 IS 8931 IS 1703 IS 778

Technical Specifications 48 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Item #6 Details

Item #7 Details

Item #8 Details

Item #9 Details

Item #10 Details

Item #11 Details