Procurement Opportunity: Title1,Title2,Title3,Title4,Title5,Title6,Title7,Title8,Title9,Title10,Title11,Title12,Title13,Titl in CENTRAL DELHI, DELHI

Providing making and placing in position wooden side table of size approx 415mm x 535mm x 740mm ht, as per approved design, the table top, bottom, side, drawer head, shutter, support shall be made up of 18mm thick hdhmr ply of make Action/Tesa or equivalent make and finished with 1mm laminate on inner surface, drawer side, drawer back, base, unit back shall be made up of 12mm thick hdhmr ply, finally all the exposed wooden surface shall be finished with

Providing making and fixing in position wooden Almira of size approx 965x460x2290mm ht, as per approved design, the almira top, botton, side, shutter, skirting, shelve shall be made up of 18mm thick hdhmr ply of make Action/Tesa or equivalent make and finised with 1mm thick laminate on all inner surfaces, unit back shall be made up of 12mm thick hdhmr ply, all the exposed edges shall be covered with wooden margine, finally all the eposed

Providing making and fixing in position wooden overhead cabinet of size approx 1310 into 440 into 760 mm ht. as per approved design, the overhead top, bottom, side, shutter, shelve, unit back shall be made up of 18mm thick hdhmr ply of Action/Tesa or equivalent make and finished with 1mm thick laminate on inner surface, all exposed wooden surface shall be finished with high quality high gloss polish

Providing making and placing in position Brass pvd coated ss table of required size, shape and as per approved design, the table fully shall be made up of stainless steel, table top shall be made up of 18mm hdhmr ply of Action/Tesa or equivalent make, finishing the table with brass colour metallic paint with all necessary process and approved texture, shade, the cost including all necessary all necessary, pvd coating, welding etc. all complete as per the direction of the engineer in charge. 550mm x 350mm x 460mm ht.

Providing making and fixing in position wooden vanity of size approx 1050x450x530 mm ht. as per approved design, the vanity top, bottom, side, drawer head, shutter, skirting, partition shall be made up of 18mm hdhmr ply of Action/Tesa or equivalent make and finished with 1mm laminate on inner surface, drawer side, drawer back, frawer base, unit back shall be consisting of 12mm hdhmr ply, finally all the exposed

Providing making and placing in position wooden dining chair of size approx 610x580x1010mm ht, as per approved design, the chair side frame, front frame, headrest, front leg, back leg, back frame, shall be made up of stainless steel round, square tubular section, Finally seat and back shall be upholstered finished stitching with approved shade fabric/leatherette with help of required 12mm, 25mm, 50mm thick Pu foam of make Sleepwell or equivalent,

Repairing/Reupholstery/Repolishing of the existing king size wooden bed, removing old damaged upholstery on headboard, footboard of the bed, reupholstery with the help of pu foam 100mm, 25mm, 12mm thick foam of 32D of Sleewell or equivalent, finished stitching with approved shade fabric/leatherite with necessary bostic, gun pins etc. repolishing on the all the wooden surface of high gloss polish of Sirca or equivalent, reapiring work wherever needed, the cost including all necessary upholstery, repolishing, nails, screws etc. all complete as per the direction of the engineer in charge.

Re-upholstery of sofa Single seater, Three seater, Two Seater, Chair as per existing pattern or as per approved design/drawing/photo, removing old dmaged material without damaging the wooden frame, upholstery on seat, arm and back with required 12mm, 25mm, 50 mm, U foam 32 D of sleepwell or equivalent, with adhesive etc. Finished with stitching approved shade leatherite or fabric, the cost including all necessary decorative nails, thread, nails, screws, jute niwar, casement patti, canvas etc. All complete as per direction of the engineer in charge.b. Two Single Seater with Quilting Design

Re-upholstery of sofa Single seater, Three seater, Two Seater, Chair as per existing pattern or as per approved design/drawing/photo, removing old dmaged material without damaging the wooden frame, upholstery on seat, arm and back with required 12mm, 25mm, 50 mm, U foam 32 D of sleepwell or equivalent, with adhesive etc. Finished with stitching approved shade leatherite or fabric, the cost including all necessary decorative nails, thread, nails, screws, jute niwar, casement patti, canvas etc. All complete as per direction of the engineer in charge. d. Chair

Re-upholstery of sofa Single seater, Three seater, Two Seater, Chair as per existing pattern or as per approved design/drawing/photo, removing old dmaged material without damaging the wooden frame, upholstery on seat, arm and back with required 12mm, 25mm, 50 mm, U foam 32 D of sleepwell or equivalent, with adhesive etc. Finished with stitching approved shade leatherite or fabric, the cost including all necessary decorative nails, thread, nails, screws, jute niwar, casement patti, canvas etc. All complete as per direction of the engineer in charge. f. Two Single Seater

Providing making and placing in position wooden table having drawers and shutter of size approx 1485x460x1055mm ht. as per approved design, the table top, bottom, side, shutter, drawer head, partition, support, shelve, skirting shall be made up of 18mm hdhmr ply of Action/Tesa or equivalent make and finished with 1mm laminate on inner surface, drawer side, drawer back, base, unit back shall be consisting of 12mm hdhmr ply, all the exposed edges

Providing making and fixing in position wooden fan cover as per approved design, made up of 12mm thick commercial ply base finishing with 4mm ost ply on outer exposed surface, finally finishing with high quality pu polish on exposed wooden surfaces, the cost including all necessary nails, screws, fevicol etc. all complete as per direction of the engineer in charge.

Providing and fixing of 12mm thick commercial ply of make Duro/Green or equivalent with all necessary nails, screws, fevicol etc. All complete as per the direction of the Engineer In Charge.

Removing, repairing, reupholstery and refixing of the existing upholstered panel on the wall, firstly removing the old panel from the wall without damaging the wall and the panel, removing old damaged leatherite/fabric from the panel, reparing the panel fixing foam adhesive wherever required, then panel upholstery with newly provided leatherite of approved shade with adheive, pin, etc. Refixing the panle on wall as per existing pattern and design. The cost including all necessary nails, screws, fevicol etc. All complete as per direction of the Engineer In Charge.

Providing and fixing carbon steel galvanised minimum coating 5 micron dash fastener of 10 mm dia double threaded 6.8 grade yield strength 480 N/mm2 counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge

Providing making and placing in position ornamental design wooden side table of required size, shape and approved design, the table top shall be consisting of 19mm thick commercial ply of Duro/Green or equivalent make and finished with 4mm thick ost ply top exposed surface, table side frame, legs shall be consisting of first class teak wood with required size and section, providing ornamenta carvin work on frame of the tabke, fixing 18mm thick marble top on table if required with enlay work on the marble, the cost including all necessary nails, screws, fevicol etc. all exposed wooden surface shall be covered with high quality pu polish of Sirca or equivalent make, All complete as per the direction of the Engineer In Charge.Round Table - 500mm Dia and 600mm ht with marble top.

Manufacturing & placing of Sofa two seater (The inner frame shall be of seasoned and chemically treated marandi wood (finished), backrest top with 100mm x 70mm wooden section, round corner top with 150mm x 70mm wooden section, side vertical support with 70mm x 30mm section, backrest vertical frame with 70mm x 30mm section, backrest bottom vertical support with 70mm x 30mm section, seat frame with 70mm x 30mm wooden section, fixing 19mm thick commercial ply of make Duro/Green or equivalent in back rest and seat with required size, upholstered with necessary padding of cotton and coir fibre etc. and covered with jute canvas/hession cloth as well as bottoms of seat to be covered with canvas/casement . Cushion shall be 1 No. seat of size 1700mm x 750mm of 25mm thick 32 kg/cum density foam alround1st layer. 50mm thick 32 kg/cum density foam, 12mm thick 32 kg/cum densisty foam shall be provided in back and side of the lounger complete as per the direction of the Engineer in charge and finally

Providing making and placing in position wooden side table of size approx 450mm x 410mm x 550mm ht, as per approved design, the table top, bottom, side, drawer head shall be made up of 19mm thick commercial ply of Duro/Green or equivalent make and finished with 4mm thick ost ply on outer exposed surface and laminate on inner surface, drawer side, drawer back, base, unit back shall be made up of 12mm thick ply, finally all the exposed wooden surface shall be finished with high quality pu polish of Sirca or equivalent make, the cost including all necessary quadro push channel 300mm, knob,