Title1,Title2,Title3,Title4,Title5,Title6,Title7,Title8,Title9,Title10,Title11,Title12,Title13,Titl
Western Railway
RATLAM, MADHYA PRADESH
Bid Publish Date
07-Jul-2026, 3:22 pm
Bid End Date
28-Jul-2026, 4:00 pm
EMD
₹20,821
Value
₹20,82,145
Location
Progress
Quantity
8588
Category
Title12
Bid Type
Two Packet Bid
Uranium Corporation Of India Limited invites bids for Title1, Title2, Title3, Title4, Title5, Title6, Title7, Title8, Title9, Title10, Title11, Title12, Title13, Title14, Title15, Title16, Title17, Title18, Title19, Title20, Title21, Title22, Title23 in EAST SINGHBHUM, JHARKHAND. Quantity: 8588. Submission Deadline: 28-07-2026 16: 00: 00. Submit your proposal before the deadline.
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
Title1 , Title2 , Title3 , Title4 , Title5 , Title6 , Title7 , Title8 , Title9 , Title10 , Title11 , Title12 , Title13 , Title14 , Title15 , Title16 , Title17 , Title18 , Title19 , Title20 , Title21 , Title22 , Title23
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Main Document
BOQ
BOQ
ATC
GEM_GENERAL_TERMS_AND_CONDITIONS
Western Railway
RATLAM, MADHYA PRADESH
Indian Army
SONITPUR, ASSAM
Uranium Corporation Of India Limited
EAST SINGHBHUM, JHARKHAND
Border Road Organisation
Indian Coast Guard
VISAKHAPATNAM, ANDHRA PRADESH
Tender Results
Loading results...
Title1
Earth work in excavation by mechanical means Hydraulic excavator manual means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer in charge. All Kind of Soil
Title2
Filling available excavated earth excluding rock in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.50m.
Title3
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared.
Title4
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth levelshelves,chajja,lintel,band,plain window sills,stsiarcase and spiral stair case above plinth level upto floor five level execluding the cost of centering,shuttering,finishing and reinforced with 1 ratio 1.5 ratio 3 1 cement 1.5 coarse sand 3 graded stone aggregate. 1 5 10 1 cement 5 coarse sand zone III derived from natural sources 10 graded stone aggregate 40 mm nominal size derived from natural sources
Title5
Providing and laying cement concrete in retaining walls, return walls, walls any thickness including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 1 2 4 1 Cement 2 coarse sand zone III derived from natural sources 4 graded stone aggregate 20 mm nominal size derived from natural sources
Title6
Centering and shuttering including strutting, propping etc and removal of form work for Foundations, footings, bases for columns Foundations, footings, bases for columns
Title7
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
Title8
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
Title9
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
Title10
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo Mechanically Treated bars of grade Fe 500D or more.
Title11
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo Mechanically Treated bars of grade Fe 500D or more.
Title12
Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. Note Cement content considered in this item is at the rate 330 kg per cum. Excess or less cement used as per design mix is payable or recoverable separately All works upto plinth level
Title13
Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note Cement content considered in this item is at the rate 330 kg per cum. Excess or less cement used as per design mix is payable or recoverable separately. All works above plinth level upto floor V level.
Title14
Add for using extra cement in the items of design mix over and above the specified cement content therein.
Title15
Brick work with common burnt clay F.P.S. non modular bricks of class designation 7.5 in foundation and plinth in Cement mortar 1 6 1 cement 6 coarse sand
Title16
Brick work with common burnt clay F.P.S. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1 6 1 cement 6 coarse sand
Title17
12 mm cement plaster of mix 1 6 1 cement 6 coarse sand
Title18
15 mm cement plaster on rough side of single or half brick wall of mix 1 6 1 cement 6 coarse sand
Title19
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work Two or more coats applied at the rate 1.43 ltr per 10 sqm over and including priming coat of exterior primer applied at the rate 2.20 kg per10 sqm
Title20
Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron steel works
Title21
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work
Title22
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length total length 90 m, having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer in charge, with reinforced barbed tape R.B.T. Spring core 2.5mm thick wire of high tensile strength of 165 kg per sq.mm with tape 0.52 mm thick and weight 43.478 gm per metre cost of M.S. angle, C.C. blocks shall be paid separately
Title23
Supplying at site Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Title1 | Earth work in excavation by mechanical means Hydraulic excavator manual means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer in charge. All Kind of Soil | 247 | cum | dgmauto | 120 | |
| 2 | Title2 | Filling available excavated earth excluding rock in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.50m. | 202 | cum | dgmauto | 120 | |
| 3 | Title3 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared. | 540 | sqm | dgmauto | 120 | |
| 4 | Title4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth levelshelves,chajja,lintel,band,plain window sills,stsiarcase and spiral stair case above plinth level upto floor five level execluding the cost of centering,shuttering,finishing and reinforced with 1 ratio 1.5 ratio 3 1 cement 1.5 coarse sand 3 graded stone aggregate. 1 5 10 1 cement 5 coarse sand zone III derived from natural sources 10 graded stone aggregate 40 mm nominal size derived from natural sources | 15 | cum | dgmauto | 120 | |
| 5 | Title5 | Providing and laying cement concrete in retaining walls, return walls, walls any thickness including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 1 2 4 1 Cement 2 coarse sand zone III derived from natural sources 4 graded stone aggregate 20 mm nominal size derived from natural sources | 6 | cum | dgmauto | 120 | |
| 6 | Title6 | Centering and shuttering including strutting, propping etc and removal of form work for Foundations, footings, bases for columns Foundations, footings, bases for columns | 28 | sqm | dgmauto | 120 | |
| 7 | Title7 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete | 140 | sqm | dgmauto | 120 | |
| 8 | Title8 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers | 143 | sqm | dgmauto | 120 | |
| 9 | Title9 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts | 127 | sqm | dgmauto | 120 | |
| 10 | Title10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo Mechanically Treated bars of grade Fe 500D or more. | 3,501 | kg | dgmauto | 120 | |
| 11 | Title11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo Mechanically Treated bars of grade Fe 500D or more. | 1,395 | kg | dgmauto | 120 | |
| 12 | Title12 | Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. Note Cement content considered in this item is at the rate 330 kg per cum. Excess or less cement used as per design mix is payable or recoverable separately All works upto plinth level | 42 | cum | dgmauto | 120 | |
| 13 | Title13 | Providing and laying in position machine batched and machine mixed design mix M 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note Cement content considered in this item is at the rate 330 kg per cum. Excess or less cement used as per design mix is payable or recoverable separately. All works above plinth level upto floor V level. | 9 | cum | dgmauto | 120 | |
| 14 | Title14 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | 17 | quintal | dgmauto | 120 | |
| 15 | Title15 | Brick work with common burnt clay F.P.S. non modular bricks of class designation 7.5 in foundation and plinth in Cement mortar 1 6 1 cement 6 coarse sand | 44 | cum | dgmauto | 120 | |
| 16 | Title16 | Brick work with common burnt clay F.P.S. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1 6 1 cement 6 coarse sand | 13 | cum | dgmauto | 120 | |
| 17 | Title17 | 12 mm cement plaster of mix 1 6 1 cement 6 coarse sand | 351 | sqm | dgmauto | 120 | |
| 18 | Title18 | 15 mm cement plaster on rough side of single or half brick wall of mix 1 6 1 cement 6 coarse sand | 324 | sqm | dgmauto | 120 | |
| 19 | Title19 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work Two or more coats applied at the rate 1.43 ltr per 10 sqm over and including priming coat of exterior primer applied at the rate 2.20 kg per10 sqm | 648 | sqm | dgmauto | 120 | |
| 20 | Title20 | Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron steel works | 28 | sqm | dgmauto | 120 | |
| 21 | Title21 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work | 28 | sqm | dgmauto | 120 | |
| 22 | Title22 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length total length 90 m, having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer in charge, with reinforced barbed tape R.B.T. Spring core 2.5mm thick wire of high tensile strength of 165 kg per sq.mm with tape 0.52 mm thick and weight 43.478 gm per metre cost of M.S. angle, C.C. blocks shall be paid separately | 180 | meter | dgmauto | 120 | |
| 23 | Title23 | Supplying at site Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. | 560 | kg | dgmauto | 120 |
Discover companies most likely to bid on this tender
Experience Criteria
Bidder Turnover
Additional Doc 1 (Requested in ATC)
Additional Doc 2 (Requested in ATC)
Additional Doc 3 (Requested in ATC)
Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Delhi Development Authority
📍 SOUTH DELHI, DELHI
Indian Army
📍 NEW DELHI, DELHI
N/a
📍 JAGATSINGHAPUR, ODISHA
N/a
📍 JAGATSINGHAPUR, ODISHA
Mod Sectt Establishment
📍 GWALIOR, MADHYA PRADESH
Sign up now to access all documents
Main Document
BOQ
BOQ
ATC
GEM_GENERAL_TERMS_AND_CONDITIONS