Invitation to Bid - LED floodlight fixture,25 W LED Post Top Luminaire,3 metre decorative octagonal steel pole,HDL Neon

25 W LED Post Top Luminaire made of pressure diecast aluminium housing with integrated poletop mounting and polyester powder coating, in addition to a specific weatherresistant treatment, colour RAL 7011. The luminaire shall be provided with a nonyellowing, transparent and textured UVprotected polycarbonate diffuser, 1.5 mm thick, having a circular radial pattern to ensure glarefree and uniform light distribution. The luminaire shall have provision for simplified maintenance through an easytoremove, topopenable driver compartment. The luminaire shall be equipped with a highefficiency, longlife LED module using SMD LED package mounted on MCPCB. The LED efficacy shall be 105 lumens per watt or higher at 3000 K colour temperature, with CRI of 70 or higher. The luminaire shall be powered by a builtin electronic LED driver having THD less than 10 percent, inbuilt surge protection of 4 kV, highvoltage cutoff at 325 V, automatic restart, and other standard protection features. The luminaire shall be suitable for pole mounting on poles having an outside diameter of 60 mm and a mounting height of 6 metres. The fixture lumen output shall be 2700 lumens or higher. The luminaire shall have a minimum protection rating of IP66 without use of glue and IK10, with a power factor of 0.95 or higher. The operating voltage range shall be 120 V to 277 V AC. The average LED life L70B50 shall be 50,000 hours. The luminaire manufacturer shall provide an LM79 test report from an NABL or UL accredited laboratory and an LM80 report issued by the LED manufacturer. Both the luminaire and LED driver shall be of the same make and shall possess separate BIS approvals. The specification shall be similar to Philips TownGlow BGP300 or equivalent

HDL Neon Flex Light, IP65 protection, supplied in 50 metre spool, with 3000 K colour temperature and 120 LEDs per metre. The diffuser shall be made of PVC and the light shall be complete with suitable LED driver and all necessary accessories for installation and operation. The product shall conform to the required technical specifications. Similar to specification or equivalent.

Underground armoured power cable, 16 sq mm, two core, XLPE insulated, with aluminium conductor, suitable for 1100 V grade, complete with inner sheath, galvanised steel armouring, and PVC outer sheath, conforming to IS 7098 Part 1, with all accessories required for installation. Similar to specification or equivalent.

Outdoor Junction Box of size 700 mm x 480 mm x 350 mm, fabricated from minimum 1.6 mm thick CRCA sheet steel or equivalent, powder-coated for corrosion resistance, suitable for outdoor installation. The junction box shall be weatherproof with minimum IP65 protection, complete with hinged lockable door, removable gland plate, mounting arrangement, earthing stud, cable entry provisions, terminal mounting plate, and all necessary hardware for installation. Similar to specification or equivalent.

Moulded Case Circuit Breaker, 100 Ampere, four pole, having a minimum breaking capacity of 25 kA at 415 V AC, 50 Hz, with thermal magnetic trip unit, suitable for isolation and protection against overload and short circuit. The MCCB shall have C curve tripping characteristics, a rated insulation voltage of 690 V or higher, and shall conform to IS/IEC 60947 Part 2. The MCCB shall be complete with all standard accessories required for installation and operation. Similar to specification or equivalent.